An experiment was performed to compare the abrasive wear of two different laminated materials. Twelve pieces of material 1 were tested by exposing each piece to a machine measuring wear. Ten pieces of material 2 were similarly tested. In each case, the depth of wear was observed. The samples of material 1 gave an average (coded) wear of 85 units with a sample standard deviation of 4, while the samples of material 2 gave an average of 81 with a sample standard deviation of 5. Can we conclude at the 0.05 level of significance that the abrasive wear of material 1 exceeds that of material 2 by more than 2 units? Assume the populations to be approximately normal with equal variances.

An experiment was performed to compare the abrasive wear of two different laminated materials. Twelve pieces of material 1 were tested by exposing each piece to a machine measuring wear. Ten pieces of material 2 were similarly tested. In each case, the depth of wear was observed. The samples of material 1 gave an average (coded) wear of 85 units with a sample standard deviation of 4, while the samples of material 2 gave an average of 81 with a sample standard deviation of 5. Can we conclude at the 0.05 level of significance that the abrasive wear of material 1 exceeds that of material 2 by more than 2 units? Assume the populations to be approximately normal with equal variances.

MATLAB: An Introduction with Applications

6th Edition

ISBN:9781119256830

Author:Amos Gilat

Publisher:Amos Gilat

Chapter1: Starting With Matlab

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

An engineer working for a tire manufacturer investigates the average life of a new material to be used in the manufacturing process. For this purpose, he builds a sample of 13 tires and tests them in a laboratory until the end of their useful life is reached. The data obtained from the sample are as follows: average of 60897.9 km and standard deviation of 2734.8 km. The engineer would like to demonstrate that the average service life of the tire with the new material exceeds 60,000 km. a) State the null and alternative hypothesis to be stated in this experiment. Test the stated hypotheses using an α = 0.05 What conclusions are reached? b) Find a 95% confidence interval for the average tire life with the new material. Interpret your answer. (RESPOND MANUALLY) (RESPOND MANUALLY)
An article shows data to compare several methods for predicting the shear strength for steel plate girders. Data for two of these methods, the Karlsruhe and Lehigh procedures, when applied nine times to a girder, are shown in the following table. We wish to determine whether there is any difference between the two methods. Assume the same standard deviations. (Note that we will perform unpaired comparison. We do not perform a paired test.) Karlsruhe Method Lehigh Method 1.21304 1.160384 1.251478 1.268834 1.218271 1.214254 1.232497 1.244961 1.142573 1.091621 1.286563 1.2297 1.239222 1.219269 1.161394 1.162844 1.169785 1.118203 1.231058 1.199258 1.233329 1.269486 1.153381 1.106666 1.2. For a sample standard deviation, use Excel function STDEV.S(), not STDEV.P(). Fill in the blanks below: Karlsruhe Method Lehigh Method x1 = x2 = s1 = s2 = n1 = n2 = 1.3. Do the data suggest that the two…
(3) A process for manufacturing soft soda produces normally distributed yield with a mean of 600 and a standard deviation of 100 units. A new modified process yields an average of 630 units for a sample of size 50. At a = 0.05 does the modified process increase the yield? %3D
Bowker and Lieberman (1972) gave the results for tests of two thermostats used in irons that were made by an old supplier and a new supplier. 18 thermostats were sampled from the old supplier and 21 thermostats were sampled from the new supplier. The actual temperatures measured with a thermocouple and were recorded. The sample from the old supplier had a mean of x₁ =549.8 and a standard deviation of s₁=9.6. The sample from the new supplier had a mean of x₂=550.4 and a standard deviation of s2=11.2. Determine the value of the pooled standard deviation Sp Sp = ... (Record to two decimal places.) 4
3) A study was conducted to see if increasing the substrate concentration has an appreciable effect on the velocity of a chemical reaction. With a substrate concentration of 1.5 moles per liter, the reaction was run 15 times, with an average velocity of 7.5 micromoles per 30 minutes and a standard deviation of 1.5. With a substrate concentration of 2.0 moles per liter, 12 runs were made, yielding an average velocity of 8.8 micromoles per 30 minutes and a sample standard deviation of 1.2. Is there any reason to believe that this increase in substrate concentration causes an increase in the mean velocity of the reaction of more than 0.5 micromole per 30 minutes? Use a 0.01 level of significance and assume the populations to be approximately normally distributed with equal variances
A researcher compares two compounds (1 and 2) used in the manufacture of car tires that are designed to reduce braking distances for SUVs equipped with the tires. The mean braking distance for SUVs equipped with tires made with compound 1 is 65 feet, with a population standard deviation of 13.6. The mean braking distance for SUVS equipped with tires made with compound 2 is 69 feet, with a population standard deviation of 8.5. Suppose that a sample of 55 braking tests are performed for each compound. Using these results, test the claim that the braking distance for SUVs equipped with tires using compound 1 is shorter than the braking distance when compound 2 is used. Let μ₁ be the true mean braking distance corresponding to compound 1 and μ₂ be the true mean braking distance corresponding to compound 2. Use the 0.05 level of significance. Step 3 of 5 Find the p-value associated with the test statistic. Round your answer to four decimal places. Answer How to enter your answer (opens in…
The void volume within a textile fabric affects comfort, flammability, and insulation properties. Permeability of a fabric refers to the accessibility of void space to the flow of a gas or liquid. An article gave summary information on air permeability (cm3/cm2/sec) for a number of different fabric types. Consider the following data on two different types of plain-weave fabric: Fabric Type Sample Size Sample Mean Sample Standard Deviation Cotton 10 51.41 0.75 Triacetate 10 132.15 3.59 Assuming that the porosity distributions for both types of fabric are normal, let's calculate a confidence interval for the difference between true average porosity for the cotton fabric and that for the acetate fabric, using a 95% confidence level. Before the appropriate t critical value can be selected, df must be determined: df = 0.5625 10 + 12.8881 10 2 (0.5625/10)2 9 + (12.8881/10)2 9 = 1.8092 0.1849…
A researcher compares two compounds (1 and 2) used in the manufacture of car tires that are designed to reduce braking distances for SUVs equipped with the tires. The mean braking distance for SUVS equipped with tires made with compound 1 is 68 feet, with a population standard deviation of 13.9. The mean braking distance for SUVs equipped with tires made with compound 2 is 73 feet, with a population standard deviation of 13.7. Suppose that a sample of 72 braking tests are performed for each compound. Using these results, test the claim that the braking distance for SUVS equipped with tires using compound 1 is shorter than the braking distance when compound 2 is used. Let μ, be the true mean braking distance corresponding to compound 1 and μ₂ be the true mean braking distance corresponding to compound 2. Use the 0.05 level of significance. Step 1 of 5: State the null and alternative hypotheses for the test.
5. The burning rates of two different solid-fuel propellants used in air crew escape systems are being studied. It is known that both propellants have approximately the same standard deviation of burning rate; that is, o1 =02 = 3 centimeters per second. Two random samples of n1 = 20 and n2 = 20 specimens are tested; the sample mean burning rates are x1 = 18 centimeters per second and x2 = 24 centimeters %3D %3D per second. 5.1. Test the hypothesis that both propellants have the same mean burning rate. Use a=0.05. What is the P-value? 5.2. Construct a 95% confidence interval on the difference in means µ1 -u2. What is the practical meaning of this interval?
A series of measurements in the lab led to an experimental result of 32.9 mL, with a calculated standard deviation of 0.3 mL. What is the standard way to report this result? Select one: 32.6-33.2 mL 32.9 ± 0.3 mL 32.9 ± 0.30 mL = 32.9 mL
In a study of microplastics in our environment, it was determined that there are 5.25 trillion plastic pieces floating in the ocean, weighing more than 250,000 tons. In a recent expedition to examine whether increases in plastic production have led to changes in ocean microplastics, 16 samples were taken at various locations in the Pacific Ocean. It was determined that the average concentration was 9.5 particles per liter of ocean water with a sample standard deviation of 6. In one of the earliest research expeditions to study microplastics in the ocean conducted in 2009, it was determined that the average concentration of microplastics was 6 particles per liter (consider this the population or reference mean). What is the critical value for the two-tailed alternative hypothesis at alpha = 5%? (Hint: This is the value in the table that you will compare your test statistic to in order to determine the outcome of the hypothesis test). 2.131 1.746 2.120 1.753
The slant shear test is widely accepted for evaluating the bond of resinous repair materials to concrete; it utilizes cylinder specimens made of two identical halves bonded at 30°. An article reported that for 12 specimens prepared using wire-brushing, the sample mean shear strength (N/mm2) and sample standard deviation were 18.60 and 1.56, respectively, whereas for 12 hand-chiseled specimens, the corresponding values were 23.19 and 4.07. Does the true average strength appear to be different for the two methods of surface preparation? State and test the relevant hypotheses using a significance level of 0.05. (Use ?1 for wire-brushing and ?2 for hand-chiseling.) H0: ?1 − ?2 = 0Ha: ?1 − ?2 ≤ 0H0: ?1 − ?2 = 0Ha: ?1 − ?2 < 0 H0: ?1 − ?2 = 0Ha: ?1 − ?2 > 0H0: ?1 − ?2 = 0Ha: ?1 − ?2 ≠ 0 Calculate the test statistic and determine the P-value. (Round your test statistic to one decimal place and your P-value to three decimal places.) t = P-value = You may have computed…