A0.362 m long metal bar is pulled to the left by an applied Part A force F and moves to the left at a constant speed of 5.90 m/s. The bar rides on parallel metal rails connected through a 50.0 2 resistor, as shown in (Figure 1), so the apparatus makes a complete circuit. You can ignore the resistance of the bar and rails. The circuit is in a uniform 0.608 T magnetic field that is directed out of the plane of the figure. Is the induced current in the circuit clockwise or counterclockwise? O clockwise O counterclockwise Submit Request Answer Figure 1 of 1 Part B What is the rate at which the applied force is doing work on the bar? Express your answer with the appropriate units. R. P. Value W

A0.362 m long metal bar is pulled to the left by an applied Part A force F and moves to the left at a constant speed of 5.90 m/s. The bar rides on parallel metal rails connected through a 50.0 2 resistor, as shown in (Figure 1), so the apparatus makes a complete circuit. You can ignore the resistance of the bar and rails. The circuit is in a uniform 0.608 T magnetic field that is directed out of the plane of the figure. Is the induced current in the circuit clockwise or counterclockwise? O clockwise O counterclockwise Submit Request Answer Figure 1 of 1 Part B What is the rate at which the applied force is doing work on the bar? Express your answer with the appropriate units. R. P. Value W

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A circular coil with radius 0.564 m has 50 turns of wire in it. The total resistance of the coil is R and it is sitting in a perpendicular magnetic field of 10 T. As the magnetic field is ramped to zero over a period of 2 s, a 5.0 A current is induced in the coil. What is R? Hig Ο 10 Ω 15 Ω 30 Ω
The slide generator in the figure below is in a uniform magnetic field of magnitude 0.0500 T. The bar of length 0.390 m is pulled at a constant speed of 0.500 m/s. The U-shaped conductor and the bar have a resistivity of 2.75 x 10-80 m and a cross-sectional area of 9.50 x 10-4 m². Find the current in the generator when x = 0.680 m. (Note that the A in the image below is the area of the loop, not the cross-sectional area of the conductor and bar.) A Bulb is unlit. A. B. Bulb is lit. O O O O( O O a G O O O O ܥܘ O O O O OG O O O O O O B BO Ā OOO O B₁ I loop O 0 0 O X F O • O O O O mech O O Activate Windows Go to Settings to activate Windows.
A rectangular loop is being pulled out of a uniform magnetic field with a strenghtas shown. The current in the wire is at a constant 2 amps while it is being pulled out of the magnetic field of strength 4.5 mT. What is the force that you must apply in order to keep the loop moving at a constant speed?
A square loop of wire with sides of 20.0cm is half in and half out of a uniform magnetic field which points out of the page as shown. The loop is moving with a speed of 3.00m/s and the strength of the magnetic field is 0.100Tesla. The total resistance of the loop is 4.00Ω. Find the magnitude and directionof the current if the loop is moving in the following directions. a.in the +x direction b.in the -x direction c.in the +y direction d.in the -y direction
A 20 turn circular loop with diameter 3 cm is placed in a magnetic field of strength 7 T such that the loop’s area vector is parallel to the magnetic field. The magnetic field is reduced to 0 T over some time and this generates a constant voltage of 5 V. How long did it take for the magnetic field to reduce to 0? 3.23 s 15.32 s 0.0198 s 0.0389 s None of the above
The figure below shows a top view of a bar that can slide on two frictionless rails. The resistor is R = 6.20 Q, and a 2.50-T magnetic field is directed perpendicularly downward, into the page. Let = 1.20 m. x * * Bin xx * X X * R x x x x x * * x X xxxxxx x x X x X X x * x XXXX * F app x X * (a) Calculate the applied force required to move the bar to the right at a constant speed of 2.50 m/s. N (to the right) (b) At what rate is energy delivered to the resistor? W
A stationary square coil of area 0.1 m2 is brought over time of 2 s into the magnetic field 8.8 T with its plane perpendicular to the magnetic field. The coil has 1317 turns. Calculate the magnetic flux linkage through the coil. Give your answer in Sl units. Answer: Choose... +
C 12:52 HW8_60e193652a3a1c9d2d... 2. 2 of 4 SOS Done The 5.2 m long metal rotor blades of a helicopter spin at 6.0 revolutions per second perpendicular to the earth's magnetic field of 4.7x10 T. Axis What is the magnetic flux swept out by the rotor blades in one revolution and what is the emf induced between the axis and tip of a rotor blade? 3. In a CRT electrons are accelerated from rest by a potential difference of 1.40x10'V These electrons enter a magnetic field with a strength of 2.20x102 T Assuming the electrons are traveling perpendicular to the field what id the radius of the are of the deflected electrons?
A circular coil enclosing an area of 140 cm? is made of 210 turns of copper wire (shown in the figure below). The wire making up the coil has no resistance; the ends of the wire are connected across a 3.00-N resistor to form a closed circuit. Initially, a 1.20-T uniform magnetic field points perpendicularly upward through the plane of the coil. The direction of the field then reverses so that the final magnetic field has a magnitude of 1.20 T and points downward through the coil. If the time interval required for the field to reverse directions is 0.200 s, what is the average current in the coil during that time? R
You have a solenoid with an initial current of 386 A and a turn density of 6088 What is the initial magnetic field through the solenoid? Binitial = 2.95 T The current in the solenoid drops to 51 A over the course of 1.1 ms. What is the final magnetic field through the solenoid? Bfinal = T Inside the solenoid is a coil with 75 loops and a radius of 9.0 cm. The coil is aligned so that the magnetic field from the solenoid passes through the coil perpendicular to the plane of the coil (directly down the center of the coil). What is the magnitude of the induced emf in the 75-turn coil at the center of the solenoid during this change in magnetic field? Enter you answer as a positive number. emf = V The coil has a resistance of 20 2. What is the current through the coil? Icoil A loops m = What is the power dissipated by the coil? Pcoil = W
6. A loop of a wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius r = 0.18 m. The normal to the plane of the loop is parallel to a constant magnetic field of magnitude 0.88 T. What is the magnitude of the change in the magnetic flux that passes through the loop when, starting with the position shown in the drawing, the semicircle is rotated through quarter of a revolution? Wb B (into paper) 190of19 oof19 oon9 oof 19.0of19 oof19 o 19 0of19 oof19 oo of19 oof oof19 19 0of19 0of19 oof19 oof19 o0