A wall (0.5 m x 1.2 m), having thermalconductivity of 1.7 W/m.K. Thetemperatures at the inner and outersurfaces are 1000K and 900 K,respectively. The heat flux through thewall is:Select one:a. 1020 Wb. 1020 W/ m2c. 10.2 Wd. 10.2 W / m2e. None of the mentioned

Answered: Image /qna-images/answer/7fedfc40-23ec-40e3-85b8-81693a2009ec.jpg

Answered: A wall (0.5 m x 1.2 m), having thermal…

A wall (0.5 m x 1.2 m), having thermal conductivity of 1.7 W/m.K. The temperatures at the inner and outer surfaces are 1000K and 90 K, respectively. The heat flux through the wall is:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The inside surface of an insulation layer is maintained at 350°C and the outside surface dissipates heat by convection and radiation to air and wall, respectively. The temperatures of air and wall are 15 °C. The insulation layer has a thickness of 10 cm and a thermal conductivity of 15 W/m.K. What is the value of the heat transfer coefficient at the outside surface of the layer, if the temperature at the outside surface should not exceed 225 °C? (The emissivity and the width of the surface are 0.3 and1 m., respectively. o-5.67x10-8 W/m²K*). Tw=15°. T=225°C ɛ=0.3 ТЬ3350°C To=15°C h.=? 10 cm
Approximately 106 discrete electrical components are placed on a single integrated circuit (chip) with electrical heat dissipation of q = 30,000 W/m². The chip, which is very thin, is exposed to a dielectric liquid at its outer surface, with ho = 450 W/m²/K and To= 20°C, and is joined to a circuit board at its inner surface. The thermal contact resistance between the chip and the board is R = 104 m² K/W, and the board thickness and thermal conductivity are L = 4 mm and 00,0 kb = 0.95 W/m/K, respectively. The other surface of the board is exposed to ambient air for which hi = 30 W/m²/K and T = 20°C. a) Provide a resistance diagram labeling appropriate variables associated with this problem. b) Determine a symbolic expression for the temperature of the chip T. c) Calculate the chip temperature for the given parameters. Coolant ho 00,01 Air Too,i hi 三三 -Chip q Te -Thermal contact resistance, Re -Board, kp
A two-layer 24 m² plane wall consists of a 250 mm thick inner concrete layer with thermal conductivity k, of 2 W/m K and a 80 mm thick outer insulation with k, of 0.04 W/m K. The temperatures of wall inner and outer surfaces are t, = 28°C and t3 =-9°C. Calculate (i) the rate of heat transfer and (ii) the temperature t, of the wall intermediate surface.
A cast iron pipe (k = 80 W/m - oC) whose inner and outer diameters are 5 cm and 5.5 cm respectively is coverd with a 3 cm thick glass wool insulation (k = 0.05 W/m - oC) The temperature at the inner surface of the pipe is 320 oC and the interface temperature between the pipe and insulation is 300 oC. Determine the surface temperature of the insulation.
Calculate the heat loss through a 100-ft² wall with an inside temperature of 65°F and an outside temperature of 35°F. Assume the exterior wall is composed of 2- in. of material having a 'k' factor of 0.80, and 2-in. of insulation having a conductance of 0.16. RTotal = 8.75 & Q = 342-Btu/hr RTotal = 9.2 & Q = 399-Btu/hr RTotal = 8.75 & Q = 399-Btu/hr RTotal = 9.2 & Q = 342-Btu/hr Hide hint for Question 3 Utilize the (RTotal = 1/C + x1/k1) equation.
A furnace wall is made up of three layer of thickness 150 mm, 110 mm, and 125mm with thermal conductivity of 1.65 W/m-K, k2, and 9.2 W/m-K respectively. Theinside is exposed to gases at 1050°C with a convection coefficient of 25 W/m2-Kand the inside surface temperature is at 900°C, the outside air temperature is at30°C with convection coefficient of 12 W/m2 -K. Calculate:a. the unknown thermal conductivity;b. the outside surface temperature and mid-plane temperatures in °F.
Consider the base plate of a 750-W household iron with a thickness of L=0.6 cm, base area of A=170 cm2, and thermal conductivity of k=22 W/m.oC. The inner surface of the base plate is subjected to uniform heat flux generated by the resistance heaters inside. When steady operating conditions are reached, the outer surface temperature of the plate is measured to be 85 oC. Disregarding any heat loss through the upper part of the iron, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the plate, (b) obtain a relation for the variation of temperature in the base plate by solving the differential equation, and (c) evaluate the inner surface temperature.
The external brick wall of a building has a surface area A of 830 m2 andthickness δ of 300 mm. The wall has a thermal insulation on its outer surface. The thermal conductivity of concrete k is 1.6 W/m K and of insulation is 0.04 W/m K. The indoor and outdoor air temperatures are ti = 21°C and to = 3°C, respectively. The heat-transfer coefficients are hi = 14 W/m2K (on the inner surface) and ho = 20 W/m2K (on the outer surface). Determine (1) the rate of heat loss through the wall without insulation and (2) the thickness of the insulation required to reduce the rate of heat loss by 60%.
In an experiment to measure the thermal conductivity of a plate of unknown material with area 1 m2 and thickness 0.1m, one of its surfaces is maintained at 100 °C and the other at 20 °C and a heat at the rate of 100 kW was supplied across it. Determine the thermal conductivity of the hot plate. Is the material metallic, non-metallic, or gas/liquid?
The outer surface of an oil heater at a uniform temperature of 100°C is to be filled with straight rectangular fins having a uniform thermal conductivity of 180 W/m.K. The ambient air temperature is 25°C and the heat transfer coefficient is 100 W/m².K. The fin thickness t-1mm, width w= 1m and its length is L= 10mm. If the heat transfer from the tip of the fin by convection, calculate fin efficiency and effectiveness. Tь =100 с Too = 25°C h = 100 W/m2-K L = 10 mm Air k= 180 W/m-K t = 1 mm
Q4/A 2-mm-diameter and 10-m-long electric wire is tightly wrapped with a 1-mm-thick plastic cover whose thermal conductivity is k-0.15 W/m "C. Electrical measurements indicate that a current of 10 A passes through the wire and there is a voltage drop of 8 V along the wire. If the insulated wire is exposed to a medium at Ts= 30°C with a heat transfer coefficient of h-24 W/m² C, determine the temperature at the interface of the wire and the plastic cover in steady operation. Also find the critical radius of plastic insulation. [334 T=30°C Electrical wire Insulation bale 10 m
The thermal conductivity of a solid material can be determined using asetup similar to the one shown in the accompanying figure. The thermocouples are placed at 2.5 cm intervals in the known material (copper alloy, k - 52 w/m.k) and the unknown sample, as shown. The known material is heated on the top by a heating element, and the bottom surface of the sample is cooled by running water through the heat sink shown. Determine the thermal conductivity of the unknown sample for the set of data given in the accompanying table. Assume no heat loss to the surroundings and perfect thermal contact at the common interface of the sample and the copper.