A ventunmeter having throat diameter 5.3 cm is provided on2655a pipe of 10 cm diameter If oil of specific gravity 0.85 isflowing in the upward direction, determine the ventur headand the discharge if the manometer shows 12.80 cm ofmercury deflection. If the vertical distance between inlet andthroat is 22 cm. Determine the actual head of theventurimeter, Assume C, = 0.65.MILEPARGRIRWachs

Given that, Throat diameter, d2=5.3 cm=0.053 m Pipe diameter, d1=10 cm=0.1 m Specific gravity of…

A ventunmeter having throat diameter 5.3 cm is provided on a pipe of 10 cm diameter. If oil of specific gravity 0.85 is flowing in the upward direction, determine the venturi head and the discharge if the manometer shows 12.80 cm of mercury deflection. If the vertical distance between inlet and throat is 22 cm. Determine the actual head of the venturimeter, Assume C, = 0.65.

A ventunmeter having throat diameter 5.3 cm is provided on a pipe of 10 cm diameter. If oil of specific gravity 0.85 is flowing in the upward direction, determine the venturi head and the discharge if the manometer shows 12.80 cm of mercury deflection. If the vertical distance between inlet and throat is 22 cm. Determine the actual head of the venturimeter, Assume C, = 0.65.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

pump with critical cavitation number 0,08 pumps water to a total head of 60 m and temperature of 15°C (Pv=1707 Pa). If the barometric pressure is 98 kPa, head loss in the suction pipe is 1m. Find the maximum value of static suction lift in meters to avoid cavitation in the pump.
8. In the figure below a manometer uses oil with specific gravity of 0.8. (a) Calculate the discharge when R = 1 ft. (b) Repeat the problem if the pipe is inclined at 30° upward. oil R 6" 3" -- 6"
A closed tank contain water up to a height of 2 m and over the water surface there is air having a pressure of 90 kPa above atmospheric pressure. Find the discharge through a small sharp-edged orifice of 15 cm dia. at the bottom of tank. Take C=0.6.
Shown below is an inverted U-tube which is used to drain alcohol from a tank reservoir. The bend of the inverted tube is 1 meter above the free surface of the alcohol in the tank and 10.5 meters above the ground where the alcohol is discharged. Alcohol exits the tube at atmospheric pressure. The Specific gravity of alcohol is 0.89 while g= 9.81. The pressure, in kilopascal, in the bend is Blank 1 P=? 1m
Water is discharged from a 5 cm (diameter) nozzle, which is inclined at a 300 angle above the horizontal. If the jet strikes the ground at a horizontal distance of 5 m and a vertical distance of 1 m from the nozzle. what is the discharge in cubic meter per second
For the frictionless syphon shown, determine the discharge and the pressure heads at A and B. Consider a pipe diameter of 210 mm with the nozzle at the exit having 140 mm diameter. Consider a datum plane that is 0.16 meters above point A. 2.44 m 1.22 m 0.15 m
A pelton type turbine has installed 37 m below the head gate of the penstock. The head loss due to friction is 26 % of the given elevation. Determine the total head in meters.