A uniform 8.00 m, 1500 kg beam is hinged to a wall and supported by a thin cable attached 2.00 m from the free end of the beam, as shown in the figure. The beam is fixed to the wall by a hinge at an angle of 30.0 degrees above the horizontal. The angle between the cable and the beam is 40.0 what is the direction of torque exerted by the beam around the point where the cable is attached to the beam? a) clockwise b) counterclockwise
Q: The length of a bicycle pedal arm is 0.165 m, and a downward force of 149 N is applied to the pedal…
A: Length of pedal arm is Applied force is Angle between pedal arm and force iscase(a) case(b) case(c):…
Q: A doctor opens a 1.35 m wide door by pushing on it with a force of 37.5 N directed perpendicular to…
A: Formula of torque is as follows; τ=rFsinθ…
Q: A 2.40-m-long, 500 kg steel uniform beam extends horizontally from the point where it has been…
A: Given values:Length of steel beam, L = 2.40 mMass of steel beam, M = 500 kgMass of worker, m = 70 kg
Q: You push on an open door, 1.52 m away from the hinges. If you push with a 116 N force at an angle of…
A: Torque can be expressed as τ=r×F
Q: A 520-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…
A:
Q: A rod is lying on the top of a table. One end of the rod is hinged to the table so that the rod can…
A: Force is applied perpendicular to the rod.Force is directed at an angle with respect to rod.Sum…
Q: (a) A man applies a force of F = 3.00 × 102 N at an angle of 60.0° to a door, x = 2.20 m from the…
A:
Q: (a) A person opens a 1.30 m wide door by pushing on it with a force of 34.5 N applied at the center…
A: Given value--- length = 1.3 m. Force = 34.5 N. force is acting perpendicular to door length. We…
Q: A vault is opened by applying a force of 300 N perpendicular to the plane of the door, 0.70 m from…
A: Given data: Force (F) = 300 N Perpendicular distance (r) = 0.70 m Required: Torque (τ)
Q: A rigid beam with one end at the origin has a force, F = 3.5 i +3.7 j +10 k N acting on it at a…
A: The objective of the question is to calculate the magnitude of the torque exerted by a force on a…
Q: The length of a bicycle pedal arm is 0.144 m, and a downward force of 141 N is applied to the pedal…
A: Torque=rFsinθ r is length of bicycle=0.144m Force=141N θ is angle between r and F θ=47.8°…
Q: A uniform beam of weight 100N is pivoted at P as shown. Weights of 10 N and 20 N are attached to its…
A:
Q: Resting horizontally, a wheelbarrow has a total mass of 65 kg, with its center of gravity 12 cm from…
A: Given: Mass of wheelbarrow: m=65 [kg] The distance of handles from the axle is: d1=1.3 [m] The…
Q: A sign for a pizza restaurant hangs from a 2.60-m long rod extended out from a building. A cable,…
A:
Q: Why is the following situation impossible? A uniform beam of mass m = 3.00 kg and length = 1.00 m…
A: For the normal force to be equal to zero, then we have to just neglect the triangular block at point…
Q: The diagram below shows a homogeneous symmetric ladder in static equilibrium when inclined at an…
A: Draw the free-body diagram of the system.
Q: 10.3 on each side is pivoted about an axis through point O at its center and per- pendicular to the…
A: F₁ = 18.0 N F₂ = 26.0 N F₃ = 14.0 N Axis of rotation is passing through point O.
Q: A store's sign has a mass of 20 kg and is 3.0 m long. It is uniform, so its center of gravity is at…
A:
Q: Problem 7 A rod of length L = 3 m sits horizontally along the x axis attached at its left end to a…
A: As per guidelines, in case of multiple questions we must solve first question and for rest…
Q: A 420-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…
A: a) First, we need to find the Tension of the cable where the sum of all the forces acting on the…
Q: A woman opens a 1.35 m wide door by pushing on it with a force of 59.5 N directed perpendicular to…
A: Given The width of the door is r = 1.35 m. The force applied on the door is F = 59.5 N. The angle…
Q: Why is the following situation impossible? A uniform beam of mass mb = 3.00 kg and length ℓ = 1.00 m…
A: The Torque equation for the system from Newton’s second law,
Q: A uniform board is leaning against a smooth vertical wall. The board is at an angle θ above the…
A:
Q: sculpture is 4.00 m tall and has its center of gravity located 1.80 m above the center of its base.…
A:
Q: (a) When opening a door, you push on it perpendicularly with a force of 41.0 N at a distance of…
A: (a) Calculate the torque. T = F*r*sinθ = 41*0.78*sin90 = 31.98 N.m Hence, torque are you…
Q: A worker opens a 1.35 m wide door by pushing on it with a force of 57.5 N directed perpendicular to…
A:
Q: A 400-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…
A:
Q: A beam is connected to the floor by a hinge. A rope is attached to the other end of the beam. The…
A: Given Data : The tension in the string is given as T = 150.7N. The mass of the box is given as mb =…
Q: A meter stick with a mass of 0.57 kg is held perpendicular to a vertical wall by a cord of length d=…
A:
Q: The boom of a crane is 19.56 m long and is inclined 28.4 degrees from the horizontal. A bucket of…
A: L= 19.56 m Angle is 28.4° M= 3292.29 kg
Q: A hungry bear weighing 705 N walks out on a beam in an attempt to retrieve a basket of goodies…
A: a. The free body diagram of the beam is shown below.
Q: A horizontal beam of length 6 m and mass 3.0 kg has a mass of 5.0 kg and width 0.8 m sitting at the…
A: Torque due to gravity Note: subscript 1 and 2 denote block and beam respectively.…
Q: 8.00 m long beam with a mass of 8.70 kg is suspended horizontally from a post, as shown. The left…
A:
Q: A 520-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…
A: Torque on a body is given by the cross product of force acting on it and the distance between the…
Q: A beam is connected to the floor by a hinge. A rope is attached to the other end of the beam. The…
A: Given: The angle between the rope and the horizontal = 21o Tension (T) = 190.2 N;
Q: A trap door, of length and width 1.85 m, is held open at an angle of 65.0° with respect to the…
A:
Q: A uniform beam of length L = 1.5 m with a mass of 11 kg is attached to a wall by a cable as shown in…
A: Length of beam = 1.5 m Mass. = 11 kg Angle = 26° Tension in the cable = ?
Q: A 480-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…
A:
Q: A 480-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…
A:
A uniform 8.00 m, 1500 kg beam is hinged to a wall and supported by a thin cable attached 2.00 m from the free end of the beam, as shown in the figure. The beam is fixed to the wall by a hinge at an angle of 30.0 degrees above the horizontal. The angle between the cable and the beam is 40.0
what is the direction of torque exerted by the beam around the point where the cable is attached to the beam?
a) clockwise
b) counterclockwise
Trending now
This is a popular solution!
Step by step
Solved in 4 steps with 8 images
- A 520-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 150-N rod as indicated in the figure below. The left end of the rod is supported by a hinge, and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.) 30.00 T ICE CREAM SHOP (a) Find the tension T in the cable. (Give the magnitude of the tension.) N (b) Find the horizontal and vertical components of force exerted on the left end of the rod by the hinge. (Take up and to the right to be the positive directions. Indicate the direction with the sign of your answer.) horizontal component N vertical component Need Help? Read It Master ItA door has a width of 1 m. The hinge attaches the door on the left. Andrea pushes on the right end of the door with a force of 30 N at angle θ=30∘θ=30∘. Bob pushes on the door in the opposite direction of Andrea. He applies a force of 30N30N perpendicular to the door at the midpoint of the door’s width. Andrea applies a magnitude of torque of ______nm to the door.Axis where x = 1.66. (a) A (b) N-m 43.0⁰ (c) As shown in the top-view diagram, a 46.6-N force is applied to the outer edge of a door of width 1.66 m. Find the torque when the line of action of the force passes through the axis of the door hinges. 4
- A 460-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 120-N rod as indicated in the figure below. The left end of the rod is supported by a hinge, and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.) 30.00 T ICE CREAM SHOP (a) Find the tension T in the cable. (Give the magnitude of the tension.) N (b) Find the horizontal and vertical components of force exerted on the left end of the rod by the hinge. (Take up and to the right to be the positive directions. Indicate the direction with the sign of your answer.) horizontal component N vertical componentA flagpole has a uniform mass density and total mass of M and length L. It is hinged at the ground and makes an angle of 6 with respect to the horizontal, as shown. To support the pole, a horizontal cable is attached to the pole at a point L from the bottom of the pole. What is the correct sum of torque equation for the axis perpendicular to the page and passing through the bottom of the pole? cable 2L/3 0-늘Mg + 응LT =0 OMgcos0 + LTsin® = 0 Mgsino + Tcos0 = 0 OMgsine + LTcos0 = 0 O-Mgsin0 + LTcos0 = 0A 520-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 110-N rod as indicated in the figure below. The left end of the rod is supported by a hinge and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.) A rectangular sign hangs along the bottom of a rod connected to a hinge on a wall on its left. A cable with tension T at the right end of the rod connects to the wall above the hinge and makes a 30.0° angle with the vertical. The right end of the sign is at the right end of the rod.(a) Find the (magnitude of the) tension T in the cable. N (b) Find the horizontal and vertical components of the force exerted on the left end of the rod by the hinge. (Take up and to the right to be the positive directions. Indicate the direction with the sign of your answer.)
- A 480-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 140-N rod as indicated in the figure below. The left end of the rod is supported by a hinge and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.) 30.00 ICE CREAM SHOP (a) Find the (magnitude of the) tension T in the cable. N (b) Find the horizontal and vertical components of the force exerted on the left end of the rod by the hinge. (Take up and to the right to be the positive directions. Indicate the direction with the sign of your answer.) horizontal component vertical componentA horizontal beam of length 2 m and mass 8.0 kg has a mass of 5.0 kg and width 0.8 m sitting at the end of the beam (see the following figure). What is the torque due to gravity (in N. m) on the beam-block system about the support at the wall? (Enter the magnitude.) Wall support 0.8 m, 5.0 kg 2 m, 8.0 kgA person exerts a horizontal force of 42 N on the end of a door 96 cm wide. What is the magnitude of the torque of the force is exerted (a) perpendicular to the door and (b) at a 60.0 degrees angle to the face of the door?
- A 400-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 120-N rod as indicated in the figure below. The left end of the rod is supported by a hinge and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.) (a) Find the (magnitude of the) tension T in the cable.=_______N (b) Find the horizontal and vertical components of the force exerted on the left end of the rod by the hinge. (Take up and to the right to be the positive directions. Indicate the direction with the sign of your answer.) HORIZONTAL COMPONENT= _________N VERTICAL COMPONENT= _________N(a) A woman opens a 1.50 m wide door by pushing on it with a force of 44.5 N applied at the center of the door, at an angle perpendicular to the door's surface. What magnitude of torque (in N · m) is applied about an axis through the hinges? N. m (b) A second person opens the same door, using the same force, again directed perpendicular to the surface, but now the force is applied at the edge of the door. What magnitude of torque (in N · m) is applied about the axis through the hinges now? N. mA 2.00-m-long, 500 kg steel uniform beam extends horizontally from the point where it has been bolted to the framework of a new building under construction. A 70 kg construction worker stands at the far end of the beam. What is the magnitude of the torque about the bolt due to the worker and the weight of the beam?