A uniform board is leaning against a smooth vertical wall. The board is at an angle θ above the horizontal ground. The coefficient of static friction between the ground and the lower end of the board is 0.590. a) Select an axis of rotation through the lower end of the board and express analytically the torque of each force in terms of the angle θ and the length of the board. b) Find the smallest value for the angle θ, such that the lower end of the board does not slide along the ground.

A uniform board is leaning against a smooth vertical wall. The board is at an angle θ above the horizontal ground. The coefficient of static friction between the ground and the lower end of the board is 0.590. a) Select an axis of rotation through the lower end of the board and express analytically the torque of each force in terms of the angle θ and the length of the board. b) Find the smallest value for the angle θ, such that the lower end of the board does not slide along the ground.

Similar questions

Please asap
A uniform rod AB of weight 500 N and length 4.0 m is supported at two points P and Q as shown below. AP = QB = 0.80 m. A man of weight 800 N is walking from Q to B. Find the maximum %3D %3D distance x from Q the man can walk before the rod topples about Q. P Q A 1 -| × |- O 0.4 m O 0.8 m O 0.75 m O 0.6 m
A 10.0 m long ladder weighing 50.0 N rests against a smooth vertical wall. If the ladder is just on the verge of slipping when it makes a 50.0° angle with the ground find the coefficient of static friction between the ladder and ground. The ladder is in equilibrium. This means that the torque around ANY pivot point must be zero. In problems like this, you can pick the pivot point of your choice, and still solve for the correct forces. However, there is typically a choice for the pivot point that makes the problem solving steps possible or at least easier. This will depend on the problem, but often depends on the fact that the torque due to a force at the pivot point is zero. This lets you ignore those torque terms in your calculations. a. What is the best choice of pivot point for this problem? Select one: A. The base of the ladder B. The center of mass of the ladder C. The top of the ladder By selecting the base of the ladder, you can ignore the torque due to both the…
On the basis of second condition of equilibrium. When opening a door, you push on it perpendicularly with a force of 55.0 N at a distance of 0.850m from the hinges. What torque are you exerting relative to the hinges?
Two children of mass 21 kg and 26 kg sit balanced on a seesaw with the pivot point located at the center of the seesaw. If the children are separated by a distance of 2 m, at what distance from the pivot point is the small child sitting in order to maintain the balance? m
A hinged beam, 92.5 kg, is supported by a horizontal cable as in the figure. The length of the cable is 2.00 m and the length of the beam is 3.00 m. Find: (a) the torque produced by gravity on the beam, (b) the tension in the cable, (c) the horizontal and vertical components of the force from the hinge, and (d) the magnitude and direction of the force from the hinge.
Problem 8: A uniform ladder whose length is 5 meter and whose weight is 400 N leans against a frictionless vertical wall. The coefficient of static friction between the level ground and the foot of the ladder is 0.40. (a) The greatest distance (denoted x) the foot of the ladder can be placed from the base of the wall without the ladder immediately slipping is ________ (b) The torque of the weight relative to the foot of the ladder at such distance is _______
A uniform 10.0 m ladder of weight WL=375 N leans against a frictionless wall. There is a force of static friction between the floor and the bottom of the ladder. A person weighing Wp stands 7.4 m between the bottom of the ladder. Draw a free body diagram for the ladder. Draw a torque diagram for the ladder. Determine the force that the wall exerts on the top of the ladder. Determine the force of static friction exerted on the ladder by the floor.
A uniform 8.00 m, 1500 kg beat is hinged to a wall and supported by a thin cable attached 2.00 m from the free end of the beam. The beam is fixed to the wall by a hinge at an angle of 30.0 degrees above the horizontal. The angle between the cable and the beam is 40 degrees. What is the direction of the torque exerted by the beam around the point where the cable is attached? -clockwise -counterclockwise
A 2.0 m long, 200 N uniform ladder, rests with one end against a smooth wall making an angle of 30° with the wall. The coefficient of static friction between the ground and the lower end of the ladder is 0.5. A force F pushes the upper end of the ladder parallel to the wall so that the ladder is on the verge of starting to slip down (static friction has reached its maximum value). The torque of the weight of the ladder relative to the lower end in the ground is: a. 200 Nm b. 620 Nm C. 546 Nm d. 400 Nm e. None of the above I
A person exerts a horizontal force of 30 N on the end of a door 92 cm wide. a) What is the magnitude of the torque if the force is exerted perpendicular to the door? b) What is the magnitude of the torque if the force is exerted at a 70.0 ∘ angle to the face of the door?