A square pile group consisting 9 pile passes through a recently constructed soft deposits with qu = 50 kN/m^2 and γ = 15 kN/m^3. The depth of deposit is 3 m. The diameter of pile is 30 cm and pile are spaced 90 cm c/c. What is negative skin friction load on the pile group

A square pile group consisting 9 pile passes through a recently constructed soft deposits with qu = 50 kN/m^2 and γ = 15 kN/m^3. The depth of deposit is 3 m. The diameter of pile is 30 cm and pile are spaced 90 cm c/c. What is negative skin friction load on the pile group

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter12: Pile Foundations

Section: Chapter Questions

Problem 12.20P: A 600 mm diameter and 25 m long driven concrete pile carries a column load of 1200 kN. It is...

See similar textbooks

Similar questions

A square pile group of 16 piles penetrates through a filled up soil of 3 m depth. The pile diameter is 250 mm and pile spacing is 0.75 m. The unit cohesion of the material is 18 kN/m² and the unit weight of the soil is 15 kN/m². Compute the drag down force on the group.
Determine the ultimate bearing load of the pile using Tomlinson for a 12.5-m closed-end steel pipe pile is driven into a uniform undrained clay. Pile diameter = 0.5 m. Unit weight of clay is 18.5 kN/m3, and undrained cohesion of 95 kN/m2. The groundwater table is at the ground surface and the clay layer extends to a great depth.
A circular pile is to be driven upto a depth of 10 m at a construction site. The average surface area of the pile is 2 m2 per meter length. The soil at the site is homogeneous sand, having effective friction angle of 30°. The ground water table (GWT) is at a depth of 4 m below the ground surface. The unit weights of the soil above and below the GWT are 18 kN/m3 and 20 kN/m3 respectively. Takek = 0.9 and the angle of wall friction (6) = 28°. The total axial frictional resistance mobilized on the pile against the driving is %3D kN. (Y = 9.81 kN/m³) %3D
A 500 mm wide, square section pile, 12 m long is driven in a deep deposit of uniform clay. Value of unconfined compressive strength of soil if the ultimate load capacity of pile is 510 kN, is kN/m2. (Take a = 0.85 and No = 9)
A rectangular pile (0.5mx0.83m) is driven in a clayey soil arrangement composed of two different layers. The first layer has a height of 5m, cohesion of 58 kPa, friction factor of 0.84. Second layer has a height of 8m, cohesion of 76 kPa, and friction factor of 0.84. Compute the allowable load that the pile can carry if the factor it safety is 2.79.
A single pile of diameter 50 cm and length 10 m is driven into clay having unconfined compressive strength of 100 kN/m2. The ultimate load bearing capacity of the pile considering end bearing also will be Nc = 7, a = 0.7). kN. (Take, %3D
Check the total settlement of a group of pile as shown in Figure 1. The total allowable settlement is set not exceed 3% of the pile diameter and the overconsolidated ratio (OCR) of the clay is more than 1. The groundwater table is located 15m beneath the ground level. The diameter of the pile, b is 0.5m and the spacing between piles, s is 2m.The pile group is subjected to foundation load of 5425KN. The laboratory testing data for the soil samples taken are as follows: At 5m, eo = 0.55, Cc = 0.32, C; = 0.09, ơ'o = 150kN/m? At 10m, eo = 0.55, Cc = 0.32, Cs = 0.09, o'o = 225KN/m? At 12m, eo = 0.55, Cc = 0.32, Cs = 0.09, o'o = 300KN/m? 7m 5m Clay 3 10m Unit weight = 18KN/m Friction angle = 0 degree 2 Cohesion = 100KN/m Figure 1: Pile system
Check the total settlement of a group of pile as shown in Figure 1. The total allowable settlement is set not exceed 3% of the pile diameter and the overconsolidated ratio (OCR) of the clay is more than 1. The groundwater table is located 15m beneath the ground level. The diameter of the pile, b is 0.5m and the spacing between piles, s is 2m.The pile group is subjected to foundation load of 5425KN. The laboratory testing data for the soil samples taken are as follows: At 5m, eo = 0.55, Cc = 0.32, C, = 0.09, ơ'o = 150KN/m? At 10m, eo = 0.55, Cc = 0.32, C; = 0.09, o'o = 225KN/m? At 12m, e, = 0.55, Cc = 0.32, C, = 0.09, oo = 300KN/m? 7m 5m Clay 10m Unit weight = 18kN/m Friction angle = 0 degree Cohesion = 100KN/m
Check the total settlement of a group of pile as shown in Figure 1. The total allowable settlement is set not exceed 3% of the pile diameter and the overconsolidated ratio (OCR) of the clay is more than 1. The groundwater table is located 15m beneath the ground level. The diameter of the pile, b is 0.5m and the spacing between piles, s is 2m.The pile group is subjected to foundation load of 5425kN. The laboratory testing data for the soil samples taken are as follows: At 5m, eo = 0.55, Cc = 0.32, C; = 0.09, o'o = 150kN/m? At 10m, eo = 0.55, Cc = 0.32, Cs = 0.09, o'o = 225kN/m2 %3D At 12m, eo = 0.55, Cc = 0.32, C; = 0.09, o'o = 300KN/m2 %3D 7m 5m Clay 3 10m Unit weight = 18KN/m %3D Friction angle = 0 degree 2 Cohesion = 100KN/m
A group pile has a section of 4 x 4 with each having a diameter of 305 mm are embedded in clay. The length of the piles are 12 m and the spacing between the piles (d) are 1.0 m. The recorded soil profile for the ground is shown in Table 1. Propose the allowable load bearing capacity of the pile with a factor of safety of (FS) of 3. (b) TABLE 1 : Soil type and soil parameter Depth Soil parameter 0.0 m to 2.0 m | Unit weight = 17.5 kN/m³ Cohesion = 20 kN/m? 2.0 m to 8.0 m Unit weight = 18.5 kN/m³ Cohesion = 60 kN/m? 8.0 m to 15.0 m Unit weight = 20.1 kN/m³ Cohesion = 80 kN/m?
A square pile (B=0.3m) is installed in a silty sand with a friction angle of approximately 28 andno cohesion. The soil is saturated, with a unit weight of 19 kN/m3. Pile length is 15m. Determinethe ultimate load capacity of the pile for the current soil conditions. Use all methods availableand get the best estimate. Estimate the elastic settlement of the pile, assuming a FS = 3. Use Ep= 21 x 106 kN/m2; Es = 20 x 103 kN/m2; µs = 0.35 and ξ = 0.67.
A group pile has a section of 4 x 4 with each having a diameter of 305 mm are embedded in clay. The length of the piles are 12 m and the spacing between the piles (d) are 1.0 m. The recorded soil profile for the ground is shown in Table 1. Propose the allowable load bearing capacity of the pile with a factor of safety of (FS) of 3. (b) TABLE 1: Soil type and soil parameter Depth Soil parameter Unit weight = 17.5 kN/m³ = 20 kN/m2 0.0 m to 2.0 m Cohesion %3D 2.0 m to 8.0 m Unit weight = 18.5 kN/m³ %3D Cohesion = 60 kN/m? 8.0 m to 15.0 m Unit weight= 20.1 kN/m³ %3D Cohesion = 80 kN/m2