A solid shaft made of aluminum alloy (E=70 Gpa, v=0.33). The diameter of the shaft is 25 mm, and subjected to a torque of T=60 Nm and a compressive force of 10 kN. Find the normal strain in y-direction at point H at the outer surface.

A solid shaft made of aluminum alloy (E=70 Gpa, v=0.33). The diameter of the shaft is 25 mm, and subjected to a torque of T=60 Nm and a compressive force of 10 kN. Find the normal strain in y-direction at point H at the outer surface.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.5.9P: The normal strain in the 45n direction on the surface of a circular tube (sec figure) is 880 × 10...

See similar textbooks

Related questions

Q: A beam with the cross section geometry and dimensions as shown in the figure and parameter table is…

A: “Since you have posted a question with multiple sub parts, we will provide the solution only to the…

Q: 3. A force P is applied to the rigid lever arm ABC as shown. The arm rotates counterclockwise about…

A: As per our guidelines we are supposed to solve only one question if multiple questions are asked .…

Q: A hollow aluminium tube used in a roof structure has an outside diameter 104mm and an inside…

A: A) Angle of twist for the given max shear stress in a hollow shaft: The angle of twist of a hollow…

Q: A 100mm diameter steel shaft is loaded as indicated in the figure. Determine the angle of twist of…

A: find angle of twist of pulley D with respect to A and shear stress in each section.

Q: The constant wall thickness of a steel tube with the cross section shown is 2 mm. If a 600-N m…

A: Given data: d=10 mmri=9 mmt=2 mmro=11 mmT=600 N.mG=80 GPa Need to determine the shear stress in the…

Q: A 0.5 m-long metal composite shaft AB consists of a steel rod (radius r=25 mm), the outer surface of…

A: Answer and explanation are given below.Explanation: Please let me know if there are any further…

Q: A hollow aluminum tube used in a roof structure has an outside diameter of 104 mm and an inside…

A: Given data: τ=48 MPaD=104 mmd=82 mmL=2.75 mG=28 GPa Need to determine the angle of twist.

Q: A thin metal alloy plate is loaded by biaxial stress (2 directions) given by 8000 psi in the x…

Q: Find the shear force and bending moment at points B and D. Note: B lies just to the right of the 150…

Q: The copper pipe (G= 50 GPa) is tightly secured to the wall at A, has an outer diameter of 40 mm and…

A: The objective of the question is to determine the maximum shear stress developed in the copper pipe…

Q: A steel cylinder is 160 mm ID and 320 mm OD. If it is subject to an internal pressure of 150 MPa,…

A: Given data Internal diameter of steel cylinder (Di) = 160 mm internal radius (ri) = 80 mm outer…

Q: The hollow shaft shown in the figure below is fixed at one end and has a lever at the other. The…

Q: At point O of a part subjected to plane stress made of steel material (E = 210 GPa and v= 0.3) the…

Q: 3. A force P is applied to the rigid lever arm ABC as shown. The arm rotates counterclockwise about…

A: An axially loaded bar undergoes change in length, becoming longer when in tension and shorter when…

Q: 2. The figure below shows a shaft with pulley and gear. Find the location along the x axis where the…

Q: A stepped shaft ABC consisting of two solid circular segments is subjected to torques '1 and T,…

Q: For the bar in the way the loading status is seen determine the strain energy on the rod so that the…

A: The maximum allowable stress will be a constraint for the hollow shaft because, for the same outer…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

Q: A bar of aluminum alloy of rectangular section75 mm x 20 mm and 800 mm long is stretched by an axial…

Q: roblem 2: The following solid shaft is loaded as shown in the figure. The 100 Nm/m distributed…

Q: 1) The triangular plane stress problem connected to a spring, is subjected to a uniformly…

A: Here's a detailed Python script that you can run on your local machine to perform the calculations:…

Q: The rod shown below is of diamater 70 mm and is fixed at one end. It is subjected to 500 N.m and 300…

A: Given, The diameter of the rod is, D=70 mm=0.07 m The radius of the rod, R=D2=0.07 m2=0.035 m The…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step by step

Solved in 5 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Solve the preceding problem if the cross- sectional dimensions are b = 1.5 in. and h = 5.0 in., the gage angle is ß = 750, the measured strains are = 209 × 10-6 and B = -110 × 10, and the material is a magnesium alloy with modulus E = 6.0 X 106 psi and Poisson’s ratio v = 0.35.
Solve Problem 7.7-11 by using Mohr’s circle for plane strain.
A circular steel tube with an outer diameter of 75 mm and inner diameter of 65 mm is subjected to torques 7"at its ends. Calculate the maximum permissible torque 7jliajl if the allowable normal strain is ea= 5 X 10"4 Assume that G = 15 GPa.
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).
-7 A steel tube (G = 11.5 x 106 psi) has an outer diameter d2= 2.0 in. and an inner diameter dt=1,5 in. When twisted by a torque 7", the tube develops a maximum normal strain of 170 x 10-6. What is the magnitude of the applied torque T?
Solve the preceding problem if the cube is granite (E = 80 GPa, v = 0.25) with dimensions E = 89 mm and compressive strains E = 690 X l0-6 and = = 255 X 10-6. For part (c) of Problem 7.6-5. find the maximum value of cr when the change in volume must be limited to 0.11%. For part. find the required value of when the strain energy must be 33 J.
A circular tube AB is fixed at one end and free at the other. The tube is subjected to concentrated torques as shown in the figure. If the outer radius of the tube is 1.5 in, and the thickness is 3/4 in., calculate the strain energy stored in the tube. Let G= 11,800 ksi.
A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
Solve the preceding problem if the length L = 56 in., the inner radius r1— 1.25 in., the angle of twist is 0.5°, and the allowable shear strain is 0.0004 rad.
A statically indeterminate stepped shaft ACE is fixed at ends A and B and loaded by a torque TQat point C (see figure). The two segments of the bar are made of the same material, have lengths L4and LB, and have polar moments of inertia IAand Ipb. Determine the angle of rotation 4>of the cross section at Cby using strain energy. Hint: Use Eq, (3-55b) to determine the strain energy Urn terms of the angle d?. Then equate the strain energy to the work done by the torque to. Compare your result with Eq. (3-52) of Example 3-9.
Derive a formula for the strain energy U of the cantilever bar shown in the figure. The bar has circular cross sections and length L. It is subjected to a distributed torque of intensity t per unit distance. The intensity varies linearly from r = 0 at the free end to a maximum value t = /0 at the support.
A thin-walled hollow tube AB of conical shape has constant thickness I and average diameters dAand dBat the ends (see figure). Determine the strain energy U oT the tube when it is subjected to pure torsion by torques T, Determine the angle of twist of the tube. Note: Use the approximate formula / ird^tlA for a thin circular ring; see Case 22 of Appendix E.