A solid cylinder is mounted above the ground with its axis of rotation oriented horizontally. A rope is wound around the cylinder and its free end is attached to a block of mass 57.5 kg that rests on aplatform. The cylinder has a mass of 225 kg and a radius of 0.480 m. Assume that the cylinder can rotate about its axis without any friction and the rope is of negligible mass. The platform is suddenlyremoved from under the block. The block falls down toward the ground and as it does so, it causes the rope to unwind and the cylinder to rotate.(a) What is the angular acceleration, in rad/s2, of the cylinder?rad/s2(b) How many revolutions does the cylinder make in 5 s?rev(c) How much of the rope, in meters, unwinds in this time interval?m

Step 1: Step 2: Step 3: Step 4:

Answered: A solid cylinder is mounted above the…

Similar questions

The figure shows a uniform disk that can rotate around its center like a merry-go-round. The disk has a radius of 2.5 cm and a mass of 24 grams and is initially at rest. Starting at time t = 0, two forces are to be applied tangentially to the rim as indicated, so that at time t = 1.2 s the disk has an angular velocity of 260 rad/s counterclockwise. Force F1 has a magnitude of 0.0988 N. What is magnitude F2? Number .164 Units N
A piece of wood is pressed against a spindle sanding disk which is a uniform disk with a radius of 0.090 m, rotating at an initial angular velocity of 37.0 rad/s (ωi = 37.0 rad/s). This motion results in a constant tangential frictional force of magnitude f = 9.00 N and causes the sanding disk to come to a complete stop in = 25.0 s. (a) Small pieces of wood get removed from the large piece of wood with a speed equal in magnitude to the tangential velocity of the rim of the sanding disk (and in a direction tangent to the disk). What is thespeed of the pieces of wood when the disk is rotating at its initial angular velocity of ωi.(b) What is the angular acceleration α of the sanding disk.(c) How many revolutions does the disk complete before coming to a stop?
A uniform spherical shell of mass M = 6.0 kg and radius R = 18.0 cm rotates about a vertical axis on frictionless bearings (see the figure). A massless cord passes around the equator of the shell, over a pulley of rotational inertia I = 3.60×10-3 kg m2 and radius r = 6.0 cm, and its attached to a small object of mass m = 4.0 kg. There is no friction on the pulley's axle; the cord does not slip on the pulley. What is the speed of the object after it has fallen a distance h = 1.1 m from rest: Use work - energy considerations
A solid, horizontal cylinder of mass 11.2 kg and radius 1.00 m rotates with an angular speed of 7.50 rad/s about a fixed vertical axis through its center. A 0.250-kg piece of putty is dropped vertically onto the cylinder at a point 0.900 m from the center of rotation and sticks to the cylinder. Determine the final angular speed of the system.
A grindstone in the shape of a solid disk (mass M = 50.0 kg) and radius R = 0.200 m (moment of Inertia | = 1/2 MR^2) is rotating at 90.0 rad/s. You press a metal box against the rim with a force F = 180 N and the grindstone comes to rest in 10.0 s. There is a friction force between the grindstone and the box. Find the magnitude of the friction.
A 17.0-m length of hose is wound around a reel, which is initially at rest. The moment of inertia of the reel is 0.490 kg-m², and its radius is 0.150 m. When turning, friction at the axle exerts a torque of magnitude 3.20 N-m on the reel. If the hose is pulled so that the tension in it remains a constant 26.0 N, how long does it take to completely unwind the hose from the reel? Neglect the mass and the thickness of the hose, and assume that the hose unwinds without slipping.
A turntable of radius R=2.00 m and mass M=32.0 kg rotates counterclockwise in a horizontal plane with an initial angular speed of 4x rad/s. The fixed turntable bearing is frictionless. The turn table is in the shape of a uniform disc with the moment of inertia of this turntable being I 0.5*MR?. (a) What is the magnitude of angular momentum of this turntable? Answer: 803.84 (b) What is the (magnitude of) the momentum of this turntable? Answer: 401.92 kgm2/s? X kgm/s? Now a lump of clay of mass m=2.48 kg and negligible size is dropped onto the turntable from a small distance above it and immediately sticks to a point 1.90 m from the axis (c) Find the final angular speed of the clay and turntable. Answer: 12.386 X rad/s
A uniform disk with mass m = 8.75 kg and radius R = 1.41 m lies in the x-y plane and centered at the origin. Three forces act in the +y- direction on the disk: 1) a force 315 N at the edge of the disk on the +x-axis, 2) a force 315 N at the edge of the disk on the -y-axis, and 3) a force 315 N acts at the edge of the disk at an angle 0 = 38° above the -x-axis. +y +x F3 IF, F2
A uniform disk (1=1/2 mR2) has a mass of 3 kg and a radius of 2m. The disk is mounted on frictionless bearings and is used as a turntable. The turntable is initially rotating at 120 rpm (revolutions per minute, convert it to rad/s). A hollow cylinder has the same mass and radius as the disk. It is released from rest, just above the turntable, and on the same vertical axis. The hollow cylinder slips on the turntable for 0.20 s until it acquires the same final angular velocity as the turntable. (HINT: Note that some of the information given is not needed! Think which conservation law(s) apply.) The final angular momentum of the system is closest to: L = Submit [5] ΑΣΦ Request Answer ? kg. m²/s 4
A circular disk with a radius of 0.51 m is subject to 2 tangentially applied forces. The disc is fixed such that it will rotate about its center. Both forces produce a torque in the same direction. The mass of the disc is 0.58 kg. The moment of inertia of a disc is I = MR² F₁ = 2.5 N applied at the outer edge of the disc. F₂ = 5.1 N applied at a distance of 0.29 from the center of the disc. What is the angular acceleration of the disc?
The figure shows a uniform disk that can rotate around its center like a merry-go-round. The disk has a radius of 1.9 cm and a mass of 23 grams and is initially at rest. Starting at time t = 0, two forces are to be applied tangentially to the rim as indicated, so that at time t = 1.2 s the disk has an angular velocity of 270 rad/s counterclockwise. Force F1 has a magnitude of 0.0984 N. What is magnitude F2?