A soil sample weighing 256 g is removed from a test pit. Water weighing 128 g will just fill the pit. A sample of soil weighing 111 grams is oven-dried and its weight after oven drying is 96.8 g. Maximum attainable dry unit weight of soil is 19.5 KN/m³ and minimum attainable dry unit weight is 16.2 KN/m³. Specific gravity of soil is 2.56.

A soil sample weighing 256 g is removed from a test pit. Water weighing 128 g will just fill the pit. A sample of soil weighing 111 grams is oven-dried and its weight after oven drying is 96.8 g. Maximum attainable dry unit weight of soil is 19.5 KN/m³ and minimum attainable dry unit weight is 16.2 KN/m³. Specific gravity of soil is 2.56.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter3: Weight–volume Relationships

Section: Chapter Questions

Problem 3.10P

See similar textbooks

Similar questions

1. (i) A dry soil has a void ratio of 0.65 and its grain specific gravity is = 2.80. What is its unit weight?(ii) Water is added to the sample so that its degree of saturation is 60% without any change in void ratio. Determine the water content and unit weight.(iii) The sample is next placed below water. Determine the true unit weight (not considering buoyancy) if the degree of saturation is 95% and 100% respectively. 2. A sample of saturated soil has a water content of 35%. The specific gravity of solids is 2.65. Determine its void ratio, porosity, saturated unit weight and dry unit weight 3. For a given soil, the void ratio e, water content w, and specific gravity Gs are found to be 0.50, 15%, and 2.65, respectively. Find: (a) Total unit weight of the soil γt (b) Degree of saturation S (c) Dry unit weight γd if the water in the void is removed 4. A shrinkage limit test for a saturated specimen had the initial volume Vi = 21.35 cm3 and initial weight Wi = 37 gf (…
A sample of 1346 grams of soil was taken from a 792 cu.cm test hole. It was then oven-dried and weighed 1076 grams. After saturating it with water, it weighed 14622 grams. a What is the degree of saturation of the soil sample, in percent? | b. What is the porosity of the soil sample? c. What is the void ratio of the sample? 09510 a What is the specific gravity of the soil?
The field wt of soil sample is 1900 kg/m³and the unit wt of the soil particle is 2660 kg/m³. A. Compute the dry unit weight if the moisture content is 11.5%. B. Compute the void ratio. C. Compute the degree of saturation.
1. A dry sand is placed in a container having a volume of 0.0092 cubic centimeter. The dry unit weightof the sample is 0.015 gram. Water is carefully added to the container so as not to disturbed thecondition of the sand. When the container is filled, the combined weight of soil plus water is 0.0182gram.a. Determine the specific gravity of soil particle.b. Determine the dry unit weight of soil.2. If the soil sample has a water content of 11% and a unit weight of 19.67 kN/m3 , determine thepercentage of air in voids and the degree of saturation if the specific gravity of soil solid is 2.75.3. If the soil sample has a specific gravity of 2.71 and a porosity of 0.345, determine the saturated unitweight and the bouyant unit weight.4. A soil sample having a liquidity index of 0.85, a plasticity index of 16.50 and a plastic limit of 11.45.The soil sample has a specicfic gravity of 2.68 and a void ratio of 0.77.a. Compute the degree of saturation.b. Compute the air void ratio.
9. A soil specimen having a volume of 0.012 m³ has a specific gravity of 2.60. It has a moist mass of 20.6 kg and a dried mass of 16.1 kg. a. Compute its void ratio. b. Compute its degree of saturation. c. Compute the dry unit weight of the soil.
A cylindrical soil sample prepared for laboratory testing has a diameter of 71 mm, a height of 142 mm, and weighs 10.675 x 10-3 kN. If the degree of saturation is 93% and the specific gravity of soil solids is 2.71, determine: void ratio water content water content under fully saturated condition
A sample of soil in natural state having volume of 0.00934 cu.m weighs 18.11kg. The sample is allowed to dry in an oven and weight was reduced to 15.67 kg. The specific gravity of solid was found to be 2.67. Determine the following: (a.) Moist unit weight of soil and dry unit weight of soil (b.) Void ratio and porosity (c.) Moisture content and Degree of saturation Show your solutions
1. Sand cone equipment is used to determine an in-place unit weight (field density test) on a compacted earth fill. Ottowa sand is used in the cone and is known to have a bulk density of 100 pcf. a. From the information given below, determine the in-place dry unit weight of the tested soil, and the water content. Soil sample dug from test hole wet weight = 4.62 lb Dried Weight of soil sample = 4.02 lb Weight of Ottowa Sand (Sand Cone) to fill test hole = 3.60 lb b. Determine the percentage of compaction of the tested soil if the laboratory moisture unit weight curve indicates a dry unit weight of 115 pcf and optimum moisture content of 13 percent.
Soil mechanics سنذن
A sample of field soil is tested in the laboratory. The results of Standard and Modified Proctor tests at optimum moisture content are given in the Table below: Standard Proctor test Modified Proctor test Mass of wet soil in the mold (g) 1800 2000 Volume of Proctor mold (cm?) 900 1000 Optimum moisture content (%) 12 10 At the field, a sample of 600 cm3 of this soil weighted 1200 g. The weight of water in this sample was 200 g. Find the following: 1- Degree of compaction (Relative compaction) (R%) at Standard Proctor test. 2- Degree of compaction (Relative compaction) (R%) at Modified Proctor test.
Problem 4: A balloon-type apparatus is used to determine an in-place unit weight for a soil (field density test). The volume of the test hole is 0.000708 cu.m. The weight of the soil obtained from the test hole is 1410 g. The soil sample was dried on a field stone and weighs 1235 g. 1. Compute the water content of the tested soil. 2. Compute the in-place dry unit weight of the tested soil. 3. Determine the $ of compaction for the test result if the soil is part of a compacted carth fill whose maximum unit weight (from laboratory compaction tests) is 18.67 KN/m³.
A soil sample is taken from a small test hole in a soil borrow pit. The volume of the test hole is determined to be 0.028 m3. The wet mass of the soil is 56 kg and the dry mass is 49 kg. The specific gravity of soil solids is 2.72. Determine wet and dry density, wet and dry unit weight, water content, voidratio, and degree of saturation.