A simply supported beam 4 m long carries a concentrated live load of 80 KN placed 1 m from the left support and dead load of 10 KN/m inclusive of its weight. The beam has a width of 240 KN with effective depth of 340 mm and protective covering of 60 mm. fe= 30 MPa and fy = 275.86 MPa. Weight of concrete is 23.5 KN/m3. Investigate the flexural capacity whether the beam is safe to carry the given loads.

A simply supported beam 4 m long carries a concentrated live load of 80 KN placed 1 m from the left support and dead load of 10 KN/m inclusive of its weight. The beam has a width of 240 KN with effective depth of 340 mm and protective covering of 60 mm. fe= 30 MPa and fy = 275.86 MPa. Weight of concrete is 23.5 KN/m3. Investigate the flexural capacity whether the beam is safe to carry the given loads.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A 8 m simply supported singly reinforced beam has a width of B= 39 cm and a height H=61 cm. Concrete compressive strength, f'c-30 MPa Steel Yield Strength of longitudinal bars, fyl-420 MPa, Steel Yield Strength of transverse bars, fyt -280 MPa, Unit weight of concrete, 24.4 kN/m³. Steel cover of the beam = 6 cm It is desired that the capacity of the beam to be at balanced condition. If the structural engineer wants the optimization ratio of the design moment and capacity to be 0.66, calculate the maximum value of the live load in kN/m to meet such condition Use NSCP2015
For the following reinforcement determine the force in the elements DG, DF and EF (section method).
Question :- The width of the beam is 250 mm and the overall deep 620 mm. It has three equal spans of 6.0 m each. The beam is arranged at 3.5 m from center to center, while the thickness of the slab is 200 mm. The imposed live load qk on the beam is 45 kN/m and the dead load gk inclusive of self-weight of the beam is 75 Kn/m. the characteristic strength of materials are feu = 30N/m², fy = 460N/mm² and f 250N/mm², Assume that the mild exposure for the beam and the nominal cover of 25 mm. Design the beam
pre stressed conc. solution pls answer
a reinforced concrete column of 300mm dia contains 4 bars of 22mm dia. find the total load, the column can carry, if the stress in steel and concrete is 50MPa and 3MPa respectively.
Check the capacity of the plain concrete beam having span of 20ft. A load of 2.0 kip/ft is applied on beam. The beam has width = 12” and depth = 20”. Concrete compressive strength (fc′) = 3 ksi
Example 2.2-A simply supported reinforced beam has a cross section with a width of 500mm and a depth of 750mm, and a span of 15m. It carries a deadload of 20kN/m and an occupancy load of 4.8kN/m. It also carries a deadload of 20kN and a live load of 5kN located at 8m from the left support. The beam is made of normal density concrete. Determine the maximum factored bending moment in the beam, Mr, due to the applied factored loads.
A singly reinforced beam of dimension 200 x 350 is reinforced with 3-25mm at the bottom. If the concrete has a compressive strength of 17MPa and the steel has a yield strength of 415 MPa, determine if the beam can carry a uniform distributed load of 18 kN/m dead load. The beam has a length of 5m with 40mm concrete clear cover, 10mm enclosed stirrups, and Es = 200 GPa. Use LRFD in the analysis.
A floor slab 100 mm thick is cast monolithically with beams 250 mm wide 450 mm deep spaced 1.2 m on centers, on simple supports over a span of 5.0 m. The floor supports a service live load of 2.1 kPa. Using f.-21 MPa, rebar strength f, 415 MPa, calculate the following if a typical interior beam is reinforced with 3- 16-mm-dia. flexure bars at the bottom enclosed with 10-mm-dia. stirrups: 1. Nominal moment capacity (kN-m) of a typical interior beam in positive bending considering T-beam geometry. A. 96.66 C. 91.10 Maximum factored uniformly distributed load (kN/m) a typical interior B. 86.99 D. 81.99 2. beam can sustain against positive bending. В. 27.83 с. 26.23 D. 29.15 A. 30.93 3. Maximum service superimposed dead load in kPa. A. 17.73 C. 16.52 B. 11.08 D. 14.77
Q5.20-.A simply supported concrete beam having a width of 370 mm and an effective depth of 650 mm carries a uniformly distributed factored load including its weight wu = 7.4 kN/m and a concentrated load Pu = 350 kN acting 2.4 m from the left support and the total beam span is 6 m. Use normal weight concrete with f'c = 28 MPa, and fy = fyt = 439.6 MPa. Using simplified calculations, determine: (1) the maximum factored shear force at the critical section from C, (2) the first spacing of the 10 mm dia stirrups between A and B, (3) the first spacing of the 10 mm dia stirrups between B and C.
AT-Beam has the following properties: bf = 750 mm, bw = 275 mm, d 560 mm, t = 115 mm. Concrete compressive strength fe 21 MPa and steel yield strength fy 415 MPa. T-Beam is under factored moment load of 720 kN-m. Locate the compression block under balanced condition from the extreme compression fiber.
A simply supported bseam of a beam and slab system, rests on a support of width 450 mm. The clear span of the beam is 10.0 m., The thickness of the slab is 120 mm. The depth of the beam below the slab is 480 mm and the width of the beam is 250 mm. The beam is reinforced with one row of 32 mm diameter steel rods. The total load including the super imposed dead load, live load and its own weight is 25.0 kN/m at service stage. Compute the maximum nominal design shear stress in the concrete.