A sharp crested, suppressed weir is under a head of 0.67m. The weirs length is 3m and its height is 1.22m. Determine the discharge coefficient Cw. Cw = 0.611 + (0.075H/P) b. Determine the flow rate of water over the weir. C. If the weir is submerged and the downstream water surface is 0.30m above the top of the weir, determine the flow rate of the water over the weir.

A sharp crested, suppressed weir is under a head of 0.67m. The weirs length is 3m and its height is 1.22m. Determine the discharge coefficient Cw. Cw = 0.611 + (0.075H/P) b. Determine the flow rate of water over the weir. C. If the weir is submerged and the downstream water surface is 0.30m above the top of the weir, determine the flow rate of the water over the weir.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

a rectangulsr suppressed weir is placed on the side of a reservoir whose plan area is a constant 1038m2. when the weir is opened, the flow rate reaches elev 5.28m. eventually it reaches 4.77m. if the crest is situated at 4.43 when the weir is opened, how long it take to lower the depth flow to 4.77m? the weir is 1.3m long and has c=0.62
Fluid.
A 119-degree V-notch-weir was installed to measure the flow in an artificial channel. The crest of the weir is located 2.25m high relative to the channel bed. Depth of overflow above the crest is 0.41m. Determine the discharge in L/s. Neglect velocity of approach. c = 0.58.
In 28.5 secs, 35,579 L of water is collected. The length of the rectangular weir is 2.15 m, the crest is 450 mm high from the channel bed and it should maintain a constant head of 275 mm. Determine the coefficient of discharge. Assume there is head loss.
-1/3 A long channel of rectangular cross-section with width 3.5 m and streamwise slope 1 in 800 carries a discharge of 15 m³ s¹. Manning's n may be taken as 0.016 m s. A broad-crested weir of height 0.7 m is constructed at the centre of the channel. Determine: (a) the depth far upstream of the weir;
a rectangular suppressed weir is placed on the side of a reservoir whose plan area is a constant 1034m^2. When the weir is opened the flow reaches elev 5.13m eventually it reaches 4.88m If the crest is situated at 4.46 when the wier is opened how long does it take to lower the depth flow to 4.88m? the weir is 2m long and has c=0.61
32
Determine the discharge (L/s) at the weir having a head of 0.813 m. if it is a trapezoidal weir with sides inclined 14.94 degrees with the vertical and a length of crust of 5.38 in. Use Cd = 0.661 and Cd = 0.641
A constant head orifice from a tank feeds water into a flume (open channel) 5m in length and 500 mm wide with a rectangular contracted weir (L=200mm) at one end and close at the other end. The orifice diam is 80mm, coef of discharge= 0.92, and a head h=1m. a) Find the maximum head H of the weir.
Compute the discharge in m3/s of Cipolletti weir, L = 4m, H=0.8m Choices below