A rod consisting of two cylindrical portions AB and BC is restrained at both ends. Portion BC is made of steel (EsX= 29 × 106 psi and as = 6.5 × 10-6°F) and portion AB is made of aluminum (E = 10.4 × 106 psi and d = 13.3 × 10¯6/°F). The rod is initially unstressed before a temperature rise of 66°F.FA24 in.32 in.B2-in. diameter 1-in. diameterDetermine the deflection of point B.The deflection of point B isX10-3 in..

Answered: Image /qna-images/answer/0ec30450-2f21-423f-a0d2-fdb3500c5e17.jpg

A rod consisting of two cylindrical portions AB and BC is restrained at both ends. Portion BC is made of steel (Es = 29 × 106 psi and as = 6.5 × 10-6/°F) and portion AB is made of aluminum (Ea = 10.4 × 106 psi and α = 13.3 × 10- 6/°F). The rod is initially unstressed before a temperature rise of 66°F. X A 24 in.-- B -32 in.- C 2-in. diameter 1-in. diameter Determine the deflection of point B. The deflection of point B is < 10-3 in. →. X

A rod consisting of two cylindrical portions AB and BC is restrained at both ends. Portion BC is made of steel (Es = 29 × 106 psi and as = 6.5 × 10-6/°F) and portion AB is made of aluminum (Ea = 10.4 × 106 psi and α = 13.3 × 10- 6/°F). The rod is initially unstressed before a temperature rise of 66°F. X A 24 in.-- B -32 in.- C 2-in. diameter 1-in. diameter Determine the deflection of point B. The deflection of point B is < 10-3 in. →. X

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Current Attempt in Progress A solid prismatic rod is L; = 330 mm long and has a circular cross section with a diameter of d = 24 mm. After the temperature of the unconstrained rod is increased, its final length is measured as L₁= 330.265 mm. Determine the change in the rod's diameter after the temperature increase. Answer: Ad = i mm
Two solid cylindrical rods (1) and (2) are joined together at flange B and loaded as shown. If F₁ = 13 kips, F₂ = 34 kips, and the normal stress in each rod must be limited to 22 ksi, determine the minimum diameter d₁ required for rod (1). A (2) d₁ F₂ B C O 1.087 in. O 0.823 in. O 0.541 in. O 0.867 in. O 1.003 in. d₂
Parvinbhai
5mm width. Rectangular cross section.
A 13-mm-diameter steel (E = 193 GPa) rod (2) is connected to a 27-mm-wide by 10-mm-thick rectangular aluminum (E = 72 GPa) bar (1), as shown. Assume L1 = 0.74 m and L2 = 1.38 m. Determine the force P (in kN rounded to the nearest tenths) required to stretch the assembly 8.1 mm.
A rigid horizontal bar ABC is supported by three vertical rods as shown. The system is stress free before the load is applied. After the load P is applied, the temperature of all three rods is raised by 110°F. Determine the magnitude of the normal stress in rod (1). Answer in MPa rounded-off to 2 decimal places. Rod (1) : E = 105 GPa; a= 22.0 x 10-5/°C A=500 mm² Rod (2): E = 200 GPa; a = 11.7 x 10-6/°C A=250 mm² 2,100 mm 4,400 mm (1) (2) B (2) P= 45 KN 2,100 mm I
By the equipment as shown in the figure, temperature can be measured. The bar AB and CD are made from aluminum and titanium. The coefficients of thermal expansion are 23.6x106 1/K and 8.2x10-6 1/k. Obtain the relationship between the temperature and the vertical displacement at the point E. 6 mm 72 mm 36 mm D
At room temperature (20°C), a 0.5-mm gap exists between the ends of the rods shown. The temperature eventually reaches a value of 140°C. Determine the normal stress in the aluminum rod. Determine the change in length of the aluminum rod.
For the antenna tower shown, it is supported in its upright position by four high tensile wires. Given specifications of the tensile wire: E = 200 GPa, diameter = 12 mm. If a = 6 m and b = 8 m Which of the following most nearly gives the elongation (in mm) of wire AD if F = 10 kN.
7m 4 m 4m 4 m 4m 150 kN 100KN 120KN Determine the normal stress in member BC if the section is circular having an outside diameter of 70mm w/ a thickness of 5mm and indicate if the member is in Compression or Tension.
Consider a deformable homogenous slender rod of constant area along its length. It is axially loaded at points A and C. According to Saint-Venant's Principle, which of the following point(s) is/are the actual maximum axial stress underestimated the most by the average stress? A B. F F L
A compound bar is formed from copper rod of diameter 30 mm and a coaxialsteel tube of cross-sectional area 1500 mm2 which are firmly attached at their ends.Determine the stress in the copper and in the steel when the temperature of thebar is dropped by 40°C and a compressive force of 100 kN is applied.For copper, E = 100 GN/m2 with α = 16.5 x10-6per ⁰C.For steel, E = 200 GN/m2 with α = 11 x10-6per ⁰C