A rigid pavement is to be designed to provide a service life and has an initial PSI of 4.4 and a TSI of 2.5. The modulus of subgrade reaction is determined to be 300 lb/in³. For design, the daily car, pickup truck, and light van traffic is 20,000; and the daily truck traffic consists of 200 passes of single-unit trucks with single and tandem axles, and 410 passes of tractor semi-trailer trucks with single, tandem, and triple axles. The axle weights are cars, pickups, light vans = two 2000-lb single axles (equivalency factor = 0.0002) single-unit trucks = 10,000-lb steering, single axle (equivalency factor = 0.081) = 22,000-lb drive, tandem axle (equivalency factor = 0.305)

A rigid pavement is to be designed to provide a service life and has an initial PSI of 4.4 and a TSI of 2.5. The modulus of subgrade reaction is determined to be 300 lb/in³. For design, the daily car, pickup truck, and light van traffic is 20,000; and the daily truck traffic consists of 200 passes of single-unit trucks with single and tandem axles, and 410 passes of tractor semi-trailer trucks with single, tandem, and triple axles. The axle weights are cars, pickups, light vans = two 2000-lb single axles (equivalency factor = 0.0002) single-unit trucks = 10,000-lb steering, single axle (equivalency factor = 0.081) = 22,000-lb drive, tandem axle (equivalency factor = 0.305)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Q1) If the traffic using the pavement grows at an annual rate of 4 present ,determine the design ESAL for 20 years, if ESAL for one year =78900?
12. Refer to Figure II-1 attached. A flexible pavement is to be evaluated according to the AASHTO 1972 design guide. The existing pavement has a weighted structural number=3.4, a regional factor=2.0, and a soil support value=4.5. What would be the approximated number of daily equivalent 18-kip axles to be allowed on this road for a 20-year analysis period?a. 10b. 33c. 100d. 1490
50 KPa is equivalent to: O A) 5x 10^6 N/m^2 O B) 5 x 10^5 N/m^2 O0 5 x 10^3 N/m^2 O D) 5 x 10^4 N/m^2 Concrete is required for a plain concrete pavement to be constructed in Southern Alberta. The pavement will be exposed to freezing, thawing, and deicers. If aggregates with a nominal maximum size of 20 mm are used, what is the minimum cement content per cubic meter of concrete as per the CSA Standard? OA) 320 kg O B) 335 kg OO 390 kg OD) 420 kg During Lab 5, the relative density of a coarse aggregate sample was determined. The sample of coarse aggregate was towel dryed to represent this moisture state: O A) OD B) Wet OC SSD O D) Air Dry When performing the slump test, each layer of concrete is rodded times as per CSA specifications: OA) 20 O B) 25 OO 30 O D) 12
The AADTT of a 2-way (2-lane each way) highway is 10,000. The directional distribution may vary between 45 and 55% depending on season. The lane distribution may vary between 60 and 75%. The driving lane always carries more loads compared to the passing lane. The growth factor for the pavement is 3.5%. Based on the above information, calculate the design AADTT for the driving lane if the pavement service life is 20 years.
Calculate ESAL in the design lane for 20 year design period for asphalt (assume TSI= 2.5) and concrete (assume TSI= 2.5 and D = 9 inch) pavement, respectively, based on the initial traffic of single axle-loads shown below, given that the yearly rate of growth 2%, Direction Distribution Factor -50%, Lane Distribution Factor = 75% Axle Load Number (kip) 18 20 22 24 26 28 30 32 34 per day 61.4 47.2 21.4 12.9 6.1 2.9 1.2 0.7 0.3
If the pavement structure number (SN) is equal to 1 and the terminal serviceability index (TSI) is 2.5. what would be the ESAL value that would correspond to a tandem axle load of 18,000 pounds? O 1.000 O.0.070 O 0.018 O 2000
A flexible pavement has the following class loads during a particular hour of the day. i. ii. 80 buses with 2-axles (each axle load of 40 kN) ; ii. 160 trucks with 2-axles (from and rear axle loads of 40 kN and 80 kN, respectively) Find the equivalent standard axle load repetitions for this vehicle combination as per IRC 37-2012.
You have been asked to design the pavement for an access highway to a major truck terminal. The design daily truck traffic consists of the following: 80 single axles at 22,500 lb each, 570 tandem axles at 25,000 lb each, 50 tandem axles at 39,000 lb each, and 80 triple axles at 48,000 lb each. The highway is to be designed with rigid pavement having a modulus of rupture of 600lb/in2 and a modulus of elasticity of 5 million lb/in2. The reliability is to be 95%, the overall standard deviation is 0.4, the drainage coefficient is 0.9, ¨PSI is 1.7 (with a TSI of 2.5), and the load transfer coefficient is 3.2. The modulus of subgrade reaction is 200 lb/in3. If a 20-year design life is to be used, determine the required slab thickness
Discuss about the effect of overloading of trucks to the pavement condition.
You have been asked to design a flexible pavement and the following daily traffic is expected for design: 6375 passenger cars with two 2-kip single axles, 375 18-wheel trucks with one 12-kip single axle and two 32-kip tandem axles, 225 triple-trailer trucks with one 18-kip single axle and six 36-kip tandem axles, and 525 single unit trucks with one 10-kip single axle and one 24-kip tandem axle. There are 3 lanes in the design direction (conservative design is to be used). Assuming a structural number of 5.0, determine the design-lane 18-kip ESALs for the pavement projected 15-year design life with the TSI of 2.5.
A flexible pavement is to be designed to last 10 years. The initial PSI is 4.2 and the TSI (the final PSI) is determined to be 2.5. The subgrade has a soil resilient modulus of 15,000 lb/in². Reliability is 95% with an overall standard deviation of 0.35. For design, the daily car, pickup truck and light van traffic is 40,000 and the daily truck traffic consists of 1500 passes of single-unit trucks with two single axles and 325 passes of tractor semi-trailer trucks with single, tandem, and triple axles. The axle weights are: Cars, pickups, light vans = two 2 kip single axles Single-unit truck = 8 kip single axle and 24 kip single axle Tractor semi-trailer truck = 10 kip single axle, 18 kip tandem axle, and 42 kip triple axle. ● ● M₂ and M3 are equal to 1 for the materials in the pavement structure. Four inches of hot- mix asphalt (HMA) is to be used as the wearing surface and 10 inches of crushed stone as the subbase. Determine the thickness required for the base if soil cement is the…
A flexible pavement is designed to last 10 years to withstand truck traffic that consists only of trucks with two 18-kip single axles. The pavement is designed for a soil CBR of 10, an initial PSI of 5.0, a TSI of 2.5, an overall standard deviation of 0.40 and a reliability of 90%, and the structural number was determined to be 6. Determine the number of daily trucks traveling in the peak direction.