A Pycnometer used in a specific gravity test was found to have a mass of 524 g when empty and 1557 g when full of clean water. An air dried sample of cohesionless soil having a mass of 512 g was placed in the jar and stirred to expel and entrapped air. The pycnometer was than carefull filled with clean water, when it had a total mass of 1878 g. Determine the specific gravity of the soil.

A Pycnometer used in a specific gravity test was found to have a mass of 524 g when empty and 1557 g when full of clean water. An air dried sample of cohesionless soil having a mass of 512 g was placed in the jar and stirred to expel and entrapped air. The pycnometer was than carefull filled with clean water, when it had a total mass of 1878 g. Determine the specific gravity of the soil.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.3P

See similar textbooks

Similar questions

A cylindrical soil sample 50 mm in diameter and 200 mm in height is used as thepermeameter in a falling head permeability test setup. In one minute of observation, thehydraulic head in the 10 mm diameter standpipe through which test water went reducedfrom 900mm to 500 mm. During that time, 1.5 liters of water were collected in the graduate. Calculate the soil sample's permeability coefficient in cm/s.
A glass cylinder 5 cm internal diameter and with a screen at the bottom was used as a falling head permeameter. The thickness of the sample was 10 cm. With the water Level in the tube at the start of the test as 50 cm above the tail water, it dropped by 10 cm in one minute, the tail water level remaining unchanged. Calculate the value of k for the sample of the soil, Comment on the nature of the soil,
Q/An experiment was made to find the specific gravity of soil in the laboratory and the results were below. What is required is to make a discussion of the results Specimen number 1 S16.4 616-4 Pycnometer bot lle number Mass ol Pycnometor, wn (g) Mass of Pycnometer and dry specimen, wpes (9) Mass ol Pycnometer, specimen and waler, w,w (9) 679,4 Moss ol Pycnometer and water, Wpew (g) 635,2 Specific gravity. G; Average Specilic gravily. G,
Afalling-head permeability test is performed on a fine-grained soil. The soil sample has a length of 120 mm and a cross-sectional area of 600 mm2. The water in the standpipe flowing into the soil is 0.60 m above the top of the sample at the start of the test. It falls 50 mm in 30 minutes. The standpipe has a cross-sectional area of 200 mm2. (a) Make a sketch of the described conditions. (b) What is the coefficient of permeability in millimeters per second? (c) What is the coefficient of permeability in feet per minute? (d) On the basis of the calculated value for khyd, what is the probable soil type?
Please help me with these question. KINDLY RECHECK IT CAREFULLY, MY LIFE IS ON THE LINE. PLEASE
In falling head permeability test the initial head was 350 mm and the final head was 50 mm. The cross-sectional area of the burette was 200 mm2. The sample was 50 mm in diameter and 100 mm long. If the test took 8 hours and 45 minutes, what was the coefficient of permeability of the soil in m/s? a.7.15 x 10-7 m/s b.6.29 x 10-7 m/s c.7.89 x 10-7 m/s d.8.78 x 10-7 m/s e.5.69 x 10-7 m/s
A specific gravity test was performed on three soil samples, and the following data were collected: Material weight of empty pycnometer weigt of dry soil weight of weight of pycnometer pycnometer Temperature + water +water+soil g Sand 1 106.6 Sand 2 106.6 Sand 3 106.6 2-a) Briefly describe the test procedure and discuss its applications in practice 2-b) The corrected specific gravity of SAND 1 G5,20 2-c) The corrected specific gravity of SAND 2 G5,20 2-d) The corrected specific gravity of SAND 3 G5,20 55.4 50 60 === === g 385.5 371 392 351 340 355 с 18 24 20
Can u solve ?(readable) A soil specimen is 38 mm in diameter and 76 mm long, and in its natural conditionweighs 168.0 g. When dried completely in an oven, the specimen weighs 130.5 g. The value ofGs is 2.73. What is the degree of saturation of the specimen?
In falling head permeability test the initial head was 350 mm and the final head was 60 mm. The cross-sectional area of the burette was 200 mm2. The sample was 50 mm in diameter and 105 mm long. If the test took 8 hours and 30 minutes, what was the coefficient of permeability of the soil in m/s?
A glass cylinder 5 cm internal diameter and with a screen at the bottom was used as a falling head permeameter. The thickness of the sample was 10 cm. With the water level in the tube at the start of the test as 50 cm above the tail water, it dropped by 10 cm in one minute, the tail water level remaining unchanged. Calculate the value of k (cm/s) for the sample of the soil.
Geotechnical Engineering (UPVOTE WILL BE GIVEN. PLEASE ANSWER THE QUESTION CORRECLTY. NO LONG EXPLANATION NEEDED. FOLLOW THE INSTRUCTIONS CAREFULLY.) A moist soil weighed 895 g with a volume of 425 cm3. After drying, the sample weighed 775 g. Of the dried soil, 400 g was poured into a vessel loose state. Its volume subsequently determined to be 275 cm3. That same 400 g was then vibrated and tamped to a volume of 212 cm3 with Gs = 2.71. a. Determine the relative density of soil in %. b. Determine the designation of the granular soil based on its relative density.
soil هفصشبكطودذؤ