Q2-4 A coarse-sand sample is 15 cm high and has 5.5 cm diameter. It is placed in a constant-head permeameter. Water passes through the sample under a constant head of 40 cm and after 6 sec, 40g of water has been collected. What is the coefficient of permeability of the sand? Jea uer co-85 10 C

Q2-4 A coarse-sand sample is 15 cm high and has 5.5 cm diameter. It is placed in a constant-head permeameter. Water passes through the sample under a constant head of 40 cm and after 6 sec, 40g of water has been collected. What is the coefficient of permeability of the sand? Jea uer co-85 10 C

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.18P

See similar textbooks

Similar questions

Please explain clearly..... Thank you
ZAIN IQ I. Homework 4... During an oedometer test on a specimen of saturated clay, the thickness of the specimen decreased from 19.931 mm to 19.720 mm under an increment of stress from 200 to 400 kPa which was maintained for 24 hours. The stress was then removed from the specimen, its thickness was measured water content determined as 26.8%. 19.842 mm, and its Taking Gs of the particles to be 2.70, calculate the void ratio before and after the application of the stress increment, and the coefficient of volume decrease (m,) for this stress range. (Ans: e,= 0.731, e2= 0.713, m, = 0.052 m/MN)
A soil sample is consolidated in the triaxial chamber under a chamber pressure of 200 kN/m2. The drain valve closes and the sample fails by applying the diverter stress Calculate the value of:-The sample breakage diverter value-The pore pressure value at the moment the specimen breaks- Skempton's A parameterThe soil shear strength parameters are: c=0, ϕ=14° and c'=0, ϕ=20°
I need the answer as soon as possible
A sample of coarse sand, 15cm high an 5.5 cm in diameter, was tested in a constant-head permeameter. Water percolate through the soil under a hydrostatic head of 40cm for a period of 6.0s. The discharge water was collected and found to weigh 400g. What was the coefficient of permeability at the void ratio and temperature of the test?
A CD test was conducted on a sample of dense sand 37 mm in diameter × 77 mm long. The cell pressure was 200 kPa. The results are shown in the table below. Axial displacement (mm) 0 0.3 0.6 1.0 1.3 1.6 1.9 3.2 5.2 6.4 7.1 9.7 12.9 15.5 Axial load (N) 0 128.1 225.9 338.9 451.8 508.3 564.8 604.3 593.0 576.0 564.8 525.2 497.0 480.0 (a) Using the data in the table, plot the Deviatoric stress (y-axis) against axial strain (x-axis) graph. (b) Using the graph from (a), draw the Mohr-circle at the peak (i.e., the maximum deviatoric stress). Determine the principal stresses as well. (c) Provided that the sample is sand, draw a failure envelope on the Mohr circle from (b) and determine the friction angle (p').
A sample of moist sand taken from the field was found to have a moisture content of 14% and a porosity of 38%. In the laboratory test that simulates field conditions, it was found that at its densest state, its void ratio is 85% and at its loosest state its void ratio is 40%. Determine the void ratio. Select one: O a. 0.42 b. 0.61 c. 0.79 d. 0.57 It is the densification of soil by removal of air which require mechanical energy. Select one: a. solidification b. consolidation C. compression d. compaction What particular sand is ideal for field density test using sand cone method? Select one: O a. clean sand b. Ottawa sand c. Owatta sand d. white sand
The following results were obtained from an oedometer test on a specimen of saturated clay: 54 107 214 429 214 107 54 27 Pressure (kPa): 1.024 1.012 1.001 0.994 1.068 1.144 1.217 1.243 Void ratio: A layer of this clay 8 m thick lies below a 4 m depth of sand, the water table being at the surface. The saturated unit weight for both soils =19 kN/m3=19 kN/m3. A 4 m depth of fill, unit weight =21 kN/m3=21 kN/m3, is placed on the sand over an extensive area. Determine the final settlement due to consolidation of the clay. If the fill were to be removed some time after the completion of consolidation, what heave would eventually take place due to swelling of the clay?
The height of the sample sand to be tested = 20 cm and the height of the saturated sand = 16 cm. Find the bulking of sand. 1. 20% 2. 55.5% 3. 25% 4. 80%
a) A CU triaxial test was carried out on a silty sand soil sample. The cell pressure was equal to 200 kPa. At failure the deviator stress was equal to 410 kPa and the pore pressure was equal to 73 kPa. i) Assuming that the cohesion intercept is equal to 0, calculate the friction angle of the soil. ii) If the friction angle was equal to 35°, calculate the cohesion intercept of the soil. iii) Calculate the angle of the failure plane relative to the horizontal plane for the soil shear strength parameters in Question 4 a i and 4 a ii.
need help
Question attached