A pair of helical gears are machined with a hob. The hob has a 20 degree pressure angle and machines circular pitch of 0.55 inch/tooth on a spur gear. Two gears are machined, the pinion has 18 teeth and the gear has 36 teeth. The measured transverse diametral pitch on the pinion is 5 inch/tooth. The pinion transmits 10 hp at 1,000 rpm. Calculate the center distance of the gearset, in inches

A pair of helical gears are machined with a hob. The hob has a 20 degree pressure angle and machines circular pitch of 0.55 inch/tooth on a spur gear. Two gears are machined, the pinion has 18 teeth and the gear has 36 teeth. The measured transverse diametral pitch on the pinion is 5 inch/tooth. The pinion transmits 10 hp at 1,000 rpm. Calculate the center distance of the gearset, in inches

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: n a compound train of gears spur gear 1, with 40 teeth and rotating at 15 rpm, drives a pinion 6…

Q: A pair of spur gears with 20° tooth form transmits 1.0-hp. The pinion is mounted on the shaft of an…

Q: Gear 2 (pinion) runs at 1800 rpm ccw and transmits 3.5 kW to frictionless, idler gear 3. The…

Q: Examine the gear drive shown. The small driving gear has 15 teeth, DP = 8, RPM = 1200, Torque = 4…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6 and…

A: Given data as per the question Speed of shaft =550 rpm No. of teeth on gear B =96 Diametral pitch =6…

Q: A pair of spur gears with 20° tooth form transmits 1.0-hp. The pinion is mounted on the shaft of an…

Q: A gear box has an input speed of 2,000.00 rev/min clockwise and an output speed of 500.00 rev/min…

A: Given data, Nin = Input speed = 2000 rev/min Nout = Output speed = 500 rev/min Pin = Input power =…

Q: A pinion with known module and number of teeth rotates at 2400 rpm and drives a gear at 800…

Q: wo spur gears are to have a ratio of 9:3 and a 7mm module. If the center distance is to be…

Q: A pair of spur gears with 20° tooth form transmits 1.0-hp. The pinion is mounted on the shaft of an…

Q: (Pinion) Gear 2 Idler N2 = 75 teeth Gear 3 Output N3 = 25 teeth O teeth he following: 1. Pinion…

Q: Can someone help please. Thanks. Devise a gear train for a machine system with the following data.…

A: Given: Speed of the pinion→Sp=2500 rpm Pressure angle→ϕ=20° Diametral pitch: →pd=28→NpDp=28…

Q: Two mating spur gears have 40 and 120 teeth respectively. The pinion rotates at 1200 rpm and…

A: Given :- Two spur gear of Z1=40 teeth and Z2=120 teeth Pinion rotates at N1=1200 rpm Torque is…

Q: A 17-tooth 20° pressure angle spur gear rotates at 1800 rev/min and transmits 4 hp to a 52-tooth…

Q: A pair of steel gears have a design life of a million cycles. They have 20° full-depth teeth with a…

A: Pitch diameter , d=NPdd==208=2.5Velocity V=πdn12V=π X 2.5 X 200012V=1308 ft/minVelocity factor for…

Q: Two internal 10-pitch, 20° full-depth gears are used in a system. The pinion has 28 teeth and the…

A: Given Data The number of teeth on pinion is:t1=28 The number of teeth on the gear is:t2=70 The…

Q: culation of Geartrains (3) NA = 20 Input Shaft 1 Only pitch circles of gears shown BNg = 70 Ne= 18…

Q: 18. A wormgear set has a single-thread worm with a pitch diameter of 1.250 in, a diametral pitch of…

A: WORMGEARING DATA FROM PROB. 8-52:To=924 LB.IN.) MG-30rem FORCES: W+G=Wxw = To / (06/2) = 924 28-IN.…

Q: Begin a full-size layout of a pair of spur gears having a 4:1 velocity ratio, a 10-in center…

Q: Two spur gears are to have a ratio of 9:3 and a 7mm module. If the center distance is to be…

A: Module(m) = 7 mmCentre Distance(CD) = 200 mmGear Ratio (GR) = 9:3 = 3:1GR = (T/t) = 3:1T = Teeth on…

Q: A pair of spur gears with 20° tooth form transmits 1.0-hp. The pinion is mounted on the shaft of an…

Q: Problem 2. A compound gear train as shown in the following figure, Gear 1 has 24 teeth and Gear…

Q: For the gear train shown in the figure. Planet gears 3, 4, and 5 are rigidly connected to a common…

A: The speed of gear 1 is 30 rpmN1=10N3=24N4=N5=12N6=20N7=30determine the speed of gear 7 and the speed…

Concept explainers

Power Transmission Elements

It is defined as the energy transfer from one location to another location. The energy will start moving from the energy generation source to the energy applied position to obtain the work output. From this method, a large amount of electric energy moves from the power station to various electrical substations.

Question

A pair of helical gears are machined with a hob.
The hob has a 20 degree pressure angle and machines circular pitch of 0.55
inch/tooth on a spur gear.
Two gears are machined, the pinion has 18 teeth and the gear has 36 teeth. The
measured transverse diametral pitch on the pinion is 5 inch/tooth.
The pinion transmits 10 hp at 1,000 rpm.
Calculate the center distance of the gearset, in inches

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: determine the variable

VIEW

Step 2: determine the center distance

VIEW

Solution

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Design of Power Transmission Elements and Power Transmission Systems

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

i need the answer quickly
In a gear set, a 36-tooth spur pinion drives a 60-tooth spur gear. The teeth of these gear are cast iron profile. The diametral pitch is 6-teeth/in, the face width si 0.5 inches, and the pressure angle is 20 degrees. Assume that the pinion transmits 10 hp at a speed of 2000 rpm. Find the pitch diameters of the gears. Find the pitch line velocity in ft/min Find the velocity factor Ky Find the tangential load in lbf Find the contact stress in kpsi, assuming CP=1960 psi.
A parallel helical gearset consists of a 21-tooth pinion driving a 63-tooth gear. The pinion has a left-hand helix angle of 20°, a normal pressure angle of 14 1/2, and a normal diametral pitch of 10 teeth/in. Find: (a) The normal, transverse, and axial circular pitches (b) The transverse diametral pitch and the transverse pressure angle (c) The addendum, dedendum, and pitch diameter of each gear Attach File Browse My Computer
i. A parallel helical gearset uses a 20-tooth pinion driving a 46-tooth gear. The pinion has a righthand helix angle of 30•, a normal pressure angle of 20•, and a normal diametral pitch of 6 teeth/in. Find: (a) The normal, transverse, and axial circular pitches (b) The normal base circular pitch (c) The transverse diametral pitch and the transverse pressure angle (d) The addendum, dedendum, and pitch diameter of each gear
Please answer the question in details
A gear box has an input speed of 1800 rev/min clockwise and an output speed of 400 rev/min The input power is 25kW and the efficiency is 90%. Compute the input torque the output power 3. the output torque
Two spur gears are to have a ratio of 9:3 and a 7mm module. If the center distance is to be approximatively 200mm, calculate the following:o Circular pitch value;o Number of teeth on the wheel (gear);o Number of teeth of the pinion;o Pitch circle diameter of the gear;o Pitch circle diameter of the pinion;
Fast please!!
Compute the values for all the geometrical features for a pair of straight bevel gears having a diametral pitch of 8, a 20° pressure angle, 16 teeth in the pinion, and 48 teeth in the gear. Specify a suitable face width. The shafts are at 90°. tad wo m that ratates at1750 com