A new process for synthesizing methanol from methane is under study to evaluate its technical feasibility. Design simulations indicate that the reactor must have a mean methane conversion greater than 36% for the process to be feasible. In an initial study, eight runs were made. The average conversion was 42% and the standard deviation was 5%. If it can be concluded that the mean conversion µ is greater than 36%, further evaluation of the process will be conducted.

A new process for synthesizing methanol from methane is under study to evaluate its technical feasibility. Design simulations indicate that the reactor must have a mean methane conversion greater than 36% for the process to be feasible. In an initial study, eight runs were made. The average conversion was 42% and the standard deviation was 5%. If it can be concluded that the mean conversion µ is greater than 36%, further evaluation of the process will be conducted.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1.3 A mixture of two liquids of equal volume is made, the one has a relative density of 0,8 and the other a density of 980 kg/m³. What will the weight of 2 500 litres be? 1.4 1.5 1.6 15 1.7 [21830 N] A solid block of stone with a relative density 4 is broken down and crushed to an average size of 20 mm. If the stone originally had a volume of 50 m³, how many truck loads with a volume of 2 m³, will it take to transport the crushed stone if 25 of the crushed stone has a mass of 80 kg. Has the relative density changed? How much? Why? [32 truck loads] Use table 1.4.2 to determine the kinematic viscosity of crude oil with a density of 855 kg/ m³ at temperatures of 20°C and 100°C. [9,357 x 10-6 m²/s; 3,275 x 10-6 m²/s] Air is used in a sensitive gyroscope to keep the metal bearing surfaces apart. Will the friction losses in the bearing be higher, lower or the same if the temperature of the bearing increases? A widely used S.I. unit for kinematic viscosity is centi- stoke cSt. One stoke is…
seems 1st one is the right answer, could you please clarify.
Concept related to the Joule Thomson effect. Handwritten solution allowed.
The concentration of salt ? g/L in homemade soap is given as a function of time as follows: ??/dt = (0.37? − 0.03)? At the initial time, ? = 0 minute, the salt concentration is 20 g/L. Choose a step size in a range of 1 < h ≤ 1.5 minutes for the interval from 0 to 8h minutes and apply THREE (3) numerical methods to compute the salt concentration. Select the best numerical method to estimate the salt concentration and justify your answer. method 1: ruler's method
hi, there experts. please help me with question 4. im having hard time answering it, please make your writings readable thank you! ^^
Do not answer in image format. Maintain accuracy and quality in your answer. Answer completely.
Correct and complete solution please don't copy
A 370-g sample of an unknown (nongaseous) material experiences a 24.0°C increase in temperature after absorbing 1.24 x 103) of energy. (a) What is the specific heat of this material? 3400 Your response differs significantly from the correct answer. Rework your solution from the beginning and check each step carefully. J/(kg. °C)
What is the melting temperature of pure Sn? Group of answer choices 327 °C 232 °C Cannot determine from the provided information. 183 °C
A process stream is to be separated using a distillation column. The feed composition and relative volatilities (independent of temperature) are as follows: Component z(mole fraction) sigma 1 0.1 2.0 2 0.4 1.8 3 0.4 1.0 4. 0.1 0.8 The feed flow rate is 100 mol/hr Component 2 molar flow rate (distillate) d2= 39.6 mol/hr Component 3 molar flow rate (bottoms) b3= 39.2 mol/hr A. For the above separation determine the number of equilibrium stages at total reflux. B. What is the composition of the distillate and bottoms at total reflux for the minimum number of stages found in part A. C. Assuming a class 1 separation estimate the internal minimum reflux ratio. Assume the feed is a saturated liquid. D. What is the composition of the distillate and bottoms at the minimum reflux ratio (with an infinite number of equilibrium stages)? Does the mixture distribute as a clas 1 separation? E. Calculate the number of stages required for operation at a reflux ratio of 1.3 times the minimum reflux…
2. Predict the sign of AS for each process: a. C₂H5OH (g) (350K and 500 torr) → C₂H5OH (g) (350K and 250 torr) b. N₂ (g) (298 K and 1 atm) → N₂ (aq) (298K and 1 atm) c. O₂ (aq) (303 K and 1 atm) → O₂ (g) (303 K and 1 atm)
For each of the given initial state parameters, select the appropriate wet bulb temperature: Note:Tdb - dry bulb temperature, F Twb - wet bulb temperature, F Tdp - dew point temperature, F h -enthalpy, Btu/lbair RH - relative humidity, % ω - humidity ratio, lbH2O/lbair v - specific volume, ft3/lbair