A monomedia filter 0.75 m deep contains sand with an effective size of 0.55 mm. The sand has a densityof 2650 kg/m³. The filtration rate is 8 m/h, and the design temperature is 10 C (p = 999.7 kg/m³, u =1.31 x 103 kg/m-s). Determine the head loss (m) through the filter. Use the Ergun equation and themidpoint Ergun parameters for sand: kv = 112, k; = 2.25, ε = 42%.

Given, Thickness of sand (L) = 0.75m Effective diameter (d) = 0.55 mm or 0.00055m To Find: Head…

A monomedia filter 0.75 m deep contains sand with an effective size of 0.55 mm. The sand has a density of 2650 kg/m³. The filtration rate is 8 m/h, and the design temperature is 10 C (p = 999.7 kg/m³, μ = 1.31 x 103 kg/m-s). Determine the head loss (m) through the filter. Use the Ergun equation and the midpoint Ergun parameters for sand: ky = 112, k; = 2.25, ε = 42%.

A monomedia filter 0.75 m deep contains sand with an effective size of 0.55 mm. The sand has a density of 2650 kg/m³. The filtration rate is 8 m/h, and the design temperature is 10 C (p = 999.7 kg/m³, μ = 1.31 x 103 kg/m-s). Determine the head loss (m) through the filter. Use the Ergun equation and the midpoint Ergun parameters for sand: ky = 112, k; = 2.25, ε = 42%.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A primary clarifier is to be designed to treat a municipal wastewater. The influent to the clarifier has a flow rate of 7570 m³/d and a total suspended solids concentration of 320 mg/L. A laboratory settling test was performed with the following results: Suspended Solids Concentration (mg/L) at Given Depths Sampling Depth (m) Time (min) 0.61 1.22 246 2.44 272 243 1.83 3.05 10 230 262 282 20 157 195 230 253 30 115 160 211 221 230 45 90 134 163 179 195 60 48 102 131 154 170 90 29 58 86 115 141 (a) Determine the design overflow rate and detention time assuming 65% of the suspended solids are to be removed. Use typical scaling/safety factors as appropriate. (b) Determine the required diameter (to the nearest 0.1 m) and the required depth (to the nearest 0.01 m) for the clarifier.
A bed of uniform sand, having particle size 0.45 mm diameter and specific gravity 2.65, porosity 0.42 and depth of the bed 0.67 m is to be washed hydraulically. Compute (a) Backwash rate so that expansion will be 50%. (b) Head loss at this rate. Take: Density of water = 998.2 kg/m³. Dynamic viscosity of water(u) = 1.002 × 10-³ kg/m-s CD 18.5 0.6 Re0.
Determine the head loss for a clean filter bed using the Carman-Kozeny equation for a stratified bed with uniform porosity of 0.40. The rapid sand filter is made up of a 760 mm deep bed of sand, specific gravity of 2.65, shape factor (4) = 0.80, temperature of 10°C, and filtration rate of 1.70 liters per second per square meter (Lpsm²). A sieve analysis is presented below. Sieve # (1) 14-20 20-28 28-32 32-35 35-42 42-48 48-60 60-65 65-100 % Sand retained (Xij) (2) 0.44 14.33 43.22 27.07 9.76 4.22 0.54 0.29 0.13 100 dij (m x 10-4) (3) 10.0060 7.111 5.422 4.572 3.834 3.225 2.707 2.274 1.777
Settling tank has a depth of 3 m and surface area of 900 m2 is used to remove particles of size 0.01 mm and specific gravity 2.65. Compute the removal percentage of the tank for the discharge of 8000 m3/d. Take viscosity of water equal to 10-3 kg/m.s.
I want the solution in less than 15 minutes
A plain sedimentation tank with a length of 20m, width of 10m, and a depth of 3m is used in a water treatment plant to treat 4 million litres of water per day (4 MLD). The average temperature of water is 20 °C. The dynamic viscosity of water is 1.002 x 10-3 N.s/m² at 20 O ° C. Density of water is 998.2 kg/M³. Average specific gravity of particles is 2.65. What is the minimum diameter of the particle which can be removed with 100% efficiency in the above sedimentation tank?
Solve the infiltration loss at t = 25 min in the linear function boundary. Given data:fo = 300mm/hrfc = 60mm/hrassume k = 4.8/hr
sluage system. (ii) The treated effluent containing grit particles from the above (i) activated sludge system is discharged into a secondary clarifier for further treatment. Assume that a spherical body undergoes settling through the clarifier with a terminal settling velocity of 2 m/s. Find the drag force on the grit particle due to the fluid. Assume that Stokes law is valid and dynamic of viscosity of effluent = 0.001 radius of spherical particle = 2 mm). In addition, outline two (2) purposes of the phi factor in particle settling? Kgm ¹s
(ii) The treated effluent containing grit particles from the above (i) activated sludge system is discharged into a secondary clarifier for further treatment. Assume that a spherical body undergoes settling through the clarifier with a terminal settling velocity of 2 m/s. Find the drag force on the body due to the fluid. Assume that Stokes law is valid and dynamic of viscosity of effluent = 0.001 Kgm-¹s-1, radius of spherical object = 2 mm)
Question 2: After conduct an experiment, you found that the soil for the watershed have an initial rate of infiltration equal to 1.35 in./hr and a final capacity of 0.3 in./hr. Assuming that the time constant k = 0.4, calculate the soil infiltration capacity at the times 10 min, 15 min, 30 min, 1 hr, 2 hr, 4 hr, and 6 hr using Horton's equation. Infiltration