A line was measured to be 625.35 m using a 50-m steel tape under a pull of 6 kg. The mean temperature during the measurement is 22°C. The tape used has a cross-sectional area of 0.000003 m? and has a standard length at 30°C under a pull of 8 kg. The modulus of elasticity of the tape is 2 x 10° kg/cm2 and the coefficient of thermal expansion is 1.16 x 10-5/°C. Calculate the corrected length of the line. Paragraph

A line was measured to be 625.35 m using a 50-m steel tape under a pull of 6 kg. The mean temperature during the measurement is 22°C. The tape used has a cross-sectional area of 0.000003 m? and has a standard length at 30°C under a pull of 8 kg. The modulus of elasticity of the tape is 2 x 10° kg/cm2 and the coefficient of thermal expansion is 1.16 x 10-5/°C. Calculate the corrected length of the line. Paragraph

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

1. As shown in the figure, there is a gap between the aluminum bar and the rigid slab that is supported by two copper bars. At 10°C, A = 0.18 mm. Neglecting the mass of the slab, calculate the stress in each rod when the temperature in the assembly is increased to 95°C. For each copper bar, A= 500 mm² E = 120 GPa, and a = 16.8 μm/(m °C). For the aluminum bar, A = 400 mm², E = 70 GPa, and a = 23.1 μm/(m. °C). Copper Aluminum Copper 750 mm
Determine bending stress formula
can you help me with detailed solution pls 2. A line was measured with a steel tape which was exactly 30m at 18°C and a pull of 50N and the measured length was 459.242m. Temperature during the measurement was 28°C and the pull applied was 10ON. The tape was uniformly supported during the measurement. Find the true length of the line f the cross sectional area of the tape was 0.02cm², the coefficient of expansion per °C = 0.0000117 and the modulus of elasticity = 21 x 10° N per cm².
Mechanics of deformable bodies.
The thin walled cylinder diameter whose diameter is 6.24 meters and thickness of 15mm. is subjected to external pressure of 2.47MPa and internal pressure of 4.32MPA. What is the longitudinal stress applied in the walls of the cylinders? Choose the nearest answer. (A) 257 MPa (в) 450 MPа 612 MPa (D) 193 MPa (E) 120 MPa
Note- Dislike for wrong answers , Please solve this correctly and accurately
The acrylic plastic rod is 200 mm long and 15 mm in diameter. If an axial load of 400 N is applied to it, determine the change in its length and the change in its diameter. E = 3.20 GPa, v = 0.4. %3D 400 N 400 N 200 mm
NOTE: The standard pull of the tape is 5kg while the team pulled only at 4kg The field temperature is 300 while the standard temp of the tape is 200 The cross sectional area of the tape is 0.05cm2. The coefficient of linear expansion is 0.000011610C and the modulus of elasticity of steel is given to be 2.0 x 106 kg/cm. The tape used here is a 50m steel tape. Determine the actual length of each lines
Question 6 of 11 -/10 E View Policies Current Attempt in Progress The stresses shown in the figure act at a point on the free surface of a machine component. If o= 45 MPa in the direction shown, determine the normal stress oy at the point. 27 MPa 30° 50 MPa O -16.3 MPa O -19.5 MPa O-22.8 MPa O-17.2 MPa O -20.5 MPa Attempts: 0 of 1 used Submit Answer Save for Later
Situation 8: The rigid, horizontal slab is attached to two identical copper rods. There is agap A = 0.08 mm between the middle bar, which is made of aluminum, and the slab.Neglecting the mass of the slab, the temperature in in all rods by 60°C. Use the following data: Each bronze rod Aluminum rod 22. Compute the stress in bronze rod 23. Compute the stress in aluminum rod 24. Compute the deflection on the rods Bronze A (mm²) 650 480 A Aluminum a (/°C) 18.9 x 10-6 23.1 x 10-6 Bronze 850 mm E (GPa) 83 70
A 100mm* 40 mm* 20 mm steel block is subjected to a hydrostatic pressure of 10MPa. The Young's modulus and Poisson's ratio of the material are 150 GPa and 0.1 respectively. Determine change in volume of the block.
The stress–strain diagram for the material of a column can be approximated as shown. Plot P/A vs. KL/r for the column.