A heat exchanger as shown in Flgure 1 is used for an air conditioning system that is working through chilled water. Hot air at 1 bar and 42 °C enters the heat exchanger at a volume flowrate of 1 m°/s leaving at 21 °C. The chilled water enters the heat exchanger at 4°C and 1.5 bar and leaves as warm water at 12 °C and same pressure. The heat transfer from the outer surface of the heat exchanger is neglected. Similarly, the kinetic and potential energy difference in both the air and water at the inlet and exit is negligible. Assume constant specific heat for both the water and air. At steady-state operation, determine: (a) The mass flow rate of the water, and (b) The rate of heat transfer between the water and the air in kW. Hot Air P3=1 bar Chilled Water P,=1.5 bar T, Conditioned Air P=1 bar T warm Water P2=1.5 bar T2 Figure 1 steady-state operation heat exchanger

A heat exchanger as shown in Flgure 1 is used for an air conditioning system that is working through chilled water. Hot air at 1 bar and 42 °C enters the heat exchanger at a volume flowrate of 1 m°/s leaving at 21 °C. The chilled water enters the heat exchanger at 4°C and 1.5 bar and leaves as warm water at 12 °C and same pressure. The heat transfer from the outer surface of the heat exchanger is neglected. Similarly, the kinetic and potential energy difference in both the air and water at the inlet and exit is negligible. Assume constant specific heat for both the water and air. At steady-state operation, determine: (a) The mass flow rate of the water, and (b) The rate of heat transfer between the water and the air in kW. Hot Air P3=1 bar Chilled Water P,=1.5 bar T, Conditioned Air P=1 bar T warm Water P2=1.5 bar T2 Figure 1 steady-state operation heat exchanger

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A small nuclear reactor is cooled by passing liquid sodium liquid sodium out of the reactor at 2 bar and 400 ° C. It is cooled to 320 ° C by passing through a heat exchanger before returning to the reactor. In the heat exchanger heat is transferred from the sodium to the water, which enters the exchanger at 100 bar and 49 ° C and exits at the same pressure as saturated steam. The mass flow of sodium is 10,000 kg / h, its specific heat is constant and is 1.25 kJ / kg "C and the pressure drop is negligible. Determine (a) the mass flow in kg / h of evaporated water. in the heat exchanger. and (b) the heat flux transferred between the two fluids in kJ / h Neglect the variations of kinetic and potential energy through it.
Air is used as a working k=1.4 substance in a given internal r=11 combustion engine, which is T;=280 K supplied with heat at a constant T;=2245 K volume. Based on the data, | p,=1.013 bar calculate the following: 1. Pressure and temperature of ending expansion. 2. Pressure rise rate V,=0.56 m³/kg the of isentropic 3. Thermal efficiency of the сycle 4.The work of the cycle 5.The average pressure of the суcle
5. The cooled water from a cooling tower returns to the condenser at 21°C at a mass flow rate of 54.4 kg/s. The air entering at state 1 has h₁ = 47.7 kJ/kg da and w₁ = 0.006 kg v/kg da. The air leaving the cooling tower at state 2 has h₂ = 116.5 kJ/kg da and w₂ = 0.027 kg v/kg da. The makeup water is supplied at 25°C and the mass flow rate of dry air is 54.4 kg da/s. What is the temperature of the warm water entering the tower? Express your answer in °C.
A 72 tons refrigeration system is used to produce chilled water from 20 ° C to 4 ° c. determine the volume flow of water
i need the answer quickly
5
Q2// A parallel - feed double - effect evaporator with equal vaporized for both, are fed with 5 Kg/s liquor with 10 percent for each effect. The overall heat transfer coefficients are 1.25 and 1.7 KW / m². K respectively. Steam is feed at 1.8630 bar and the second effect operates at 0.2856 bar. If the mass fraction from the 1st effect was 40 percent, What will be the total concentrated liquid from both? And compute the Temperature distribution for the system. Cp=4.18kJ/kg.k
In a steady flow process, the working fluid flows at a rate of 240 kg/min. The fluid rejects 120 kJ/s passing through the system. The conditions of fluid at inlet and outlet are given as : C1 = 300 m/s, p1 = 6.2 bar,u1 = 2100 kJ/kg, v1 = 0.37 m3/kg and C2 = 150 m/s, p2 = 1.3 bar, u2 = 1500 kJ/kg, v2 = 1.2 m3/kg. The suffix 1 indicates the conditions at inlet and 2 indicates at outlet of the system. Neglecting the change in potential energy, determine the power capacity of the system in MW.
i need the answer quickly
A single effect evaporator is used to concentrate 10 000 kg / hr of tomato juice from 5% total solids to 30% total solids. The juice enters the evaporator at 25 ° C. The evaporator is operated on Steam (80% quality) at 143.27 kPa. The vacuum in the evaporator allows the juice to boil at 80 ° C. The specific heat of the dilute material is 4.1 kJ / (kg ° C) and the concentrate product is 3.1 kJ / (kg ° C). Count it (a) Steam demand rate = Answer kg / hour. b. Steam economy when condensate temperature is released at 75 ° C. = Answer (kg of water evaporated / kg of steam)
8
Air at 1 bar, 27 °C, with a volumetric flow rate of 40 m³/min enters the non-mixing counterflow heat exchanger part of an air-conditioning system. This air exits the heat exchanger at 0.95 bar and 17 °C. The cooling of this air is done by a stream of refrigerant R-134a that enters the heat exchanger at 5 bar with a quality of 0.3 and exits at 5 bar and 20 °C. Determine the overall rate of entropy production during this process, in kW. The overall heat exchanger is insulated. The operation is steady state, and the effects of potential and kinetic energy are negligible.