a) Geothermal Power Plantd) Coal-Fired Power Plantg) Wind Power Plantb) Solar Power Plante) Diesel Power Planth) Combined-Cycle Power Plantc) Hydroelectric Plantf) Tidal Power PlantSelect the correct type of power generation with corresponding description as listed above:25. Used for small scale production of Electric Power and mainly used as back-up for UPS.26. Using one of the cleanest and most abundant renewable energy sources27. Emit significant amount of harmful gases into the atmosphere28. Include dry and flash steam power stations and binary cycle power stations, all of which use steamturbines to produce electricity29. Harnessing the gravitational force and emit fewer greenhouse gases30. Considered more predictable compared to wind energy and solar power31. Using both gas and steam turbines and produce higher amount of electricity_32. Can also be built on agricultural lands and sea, without causing any interruption to cultivation andmarine activities

a) Geothermal Power Plant d) Coal-Fired Power Plant g) Wind Power Plant b) Solar Power Plant e) Diesel Power Plant c) Hydroelectric Plant f) Tidal Power Plant h) Combined-Cycle Power Plant Select the correct type of power generation with corresponding description as listed above: 25. Used for small scale production of Electric Power and mainly used as back-up for UPS. 26. Using one of the cleanest and most abundant renewable energy sources 27. Emit significant amount of harmful gases into the atmosphere

a) Geothermal Power Plant d) Coal-Fired Power Plant g) Wind Power Plant b) Solar Power Plant e) Diesel Power Plant c) Hydroelectric Plant f) Tidal Power Plant h) Combined-Cycle Power Plant Select the correct type of power generation with corresponding description as listed above: 25. Used for small scale production of Electric Power and mainly used as back-up for UPS. 26. Using one of the cleanest and most abundant renewable energy sources 27. Emit significant amount of harmful gases into the atmosphere

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

26 - Ethyl glycol is cooled with water (Cp=4.18 kJ/kgºC) in a heat exchanger. The inlet temperature of the water is 17ºC and the outlet temperature is 64ºC. If the heat lost by ethyl glycol is 290 kW, which of the following is the mass flow rate of water? a) 1,652 kg/h B) 1,318 kg/h NS) 1,282 kg/h D) 1,560 kg/h TO) 1,476 kg/h
Given that you are a policy maker in Davao, how will you rank the following in terms of the city's preference for renewable energy source, Geothermal, Wave or Biomass? Please back up your answers and explain in detail. Please consider pros and cons of each and their impacts in the community, economy, industry and environment.
None
Thermodynamics
A steam power plant operates on a theoretical reheat cycle. Steam at 25 bar pressure and 400°C is supplied to the high pressure turbine. After its expansion to dry state, the steam is reheated at constant pressure to its original temperature. Subsequent expansion occurs in the low pressure turbine to a condenser pressure of 0.04 bar. Considering feed pump work, Calculate: a)Quality of steam at entry to condenser b)Thermal efficiency c)Specific steam consumption.
If the combustion chamber efficiency ofa diesel fuel power plant is 13% more of that thermal efficiency of 78 52% and the actual heat released is 8% less of that heat supplied to the system which is equal to 142 Joules. What is the theoretical heat value available in the system? 147.27 joules B) 182.50 joules (c) 225.45 joules 289.35 joules
12. An electric generating station is designed to have an electric output power of 1.40 MW using a turbine with 2/3 the efficiency of a Carnot engine. The exhaust energy is transferred by heat into a cooling tower at 100 °C. a) State the energy conversion flow of the electric generating system. b) Find the rate at which the station exhausts energy by heat as a function of the fuel combustion temperature, TH c) If the hot reservoir is modified to run hotter by using more advanced combustion technology, evaluate how does exhaust power change. Justify your answer quantitatively or qualitatively.
Thermofluid 4. I his question requires you to demonstrate your knowledge and understanding of gas turbine engines. A small aircraft is powered by a single-spool turbojet engine with a convergent nozzle. It flies at a velocity Vo = 226 m/s and at an altitude where the ambient pressure is 79,500 Pa. The engine intake supplies air at a total pressure and temperature of 101,846 Pa and 300 K respectively. a) b) Draw a process diagram for this engine showing your stage notation and mechanical linkages; Using engine performance data given in Table Q4, determine the engine thrust and thrust specific fuel consumption, stating any assumptions made. Intake air mass flow rate Compressor pressure ratio Compressor isentropic efficiency Combustion efficiency Fuel Lower Heating Value (LHV) Turbine entry temperature Turbine isentropic efficiency Jet pipe total pressure loss Ycold Cp.cold Rcold 1.4 Gas constants Phot Cphot 52 kg/s Rhot 4 87% 98% 43.1 MJ/kg 1060 K 92% 2% 1,005 J/(kg-K) 287.0 J/(kg-K)…
1) a) On a sketch illustrate natural gas fired power plant generating and delivering electricity to an end user. At a minimum illustrate the following components: i) Boiler ii) Transformer iii) Generator iv) Turbine v) Condenser Given that the overall efficiency of the above natural gas fired power plant to customer using electricity is 37% illustrate on the above sketch, where the losses occur and the approximate scale of the different losses? b) Draw the corresponding Sankey diagram for the above assuming 100 units of input natural gas energy
5 and 6
12 - Ethyl glycol is cooled with water (Cp=4.18 kJ/kgºC) in a heat exchanger. The inlet temperature of the water is 11ºC and the outlet temperature is 57ºC. If the heat lost by ethyl glycol is 300 kW, which of the following is the mass flow rate of water? a) 1,318 kg/h B) 1,560 kg/h NS) 1,282 kg/h D) 1,652 kg/h TO) 1,476 kg/h
What is the turbine efficiency of a Hydro eletric power plant if the total power efficiency is equal to 56.25%, drive syste efficiency is 81 5% and generator efficiency is 79.8%? A) 86.5% B) 76.5% 66.6% 56.6%