A falling-head permeability test was run on a soil sample 9.6 cm in diameter and 10 cm long. The head at the start of the test was 90 cm. The coefficient of permeability of the soil was found to be 5x10 cm/s. The diameter of the stand pipe was 1 cm. Determine how much head was lost during the first 33 mins. 82.84 7.16 6.88 O 83.12

A falling-head permeability test was run on a soil sample 9.6 cm in diameter and 10 cm long. The head at the start of the test was 90 cm. The coefficient of permeability of the soil was found to be 5x10 cm/s. The diameter of the stand pipe was 1 cm. Determine how much head was lost during the first 33 mins. 82.84 7.16 6.88 O 83.12

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

What safety measures are used for vehicle-to-vehicle communications?
From the constant head permeability test, the following values are given: Void ratio of specimen 0.46 Length of soil sample 450 mm Constant head difference 700 mm Water collected in a period of 180 seconds Cross-sectional area of soil sample 3.54 x 10-4 m³ 2.26 x 10-3 m² a.) Determine the coefficient of permeability in m/hour. b.) Compute the discharge velocity in mm/s. c.) Compute the seepage velocity in mm/s. d.) If the test was done at 24°C, what is its corrected coefficient of permeability?
For a falling head permeability test, the following are given: length of specimen is 360 mm, area of specimen is 70 cm2 , and hydraulic conductivity of soil specimen is 0.165 cm/min. what should be the area of the stand pipe for the head to drop from 700cm to 360cm in 7 mins? compute the seepage velocity under the test condition if the soil specimen has a void ratio of 0.55 in cm/sec compute the head difference at time equal to 5 minutes?
PROBLEM D For a falling head laboratory test, the following are the given values: • Length of soil specimen 480.0 mm Initial head 700.00 mm = Final head = 395.00 mm Duration of test = 5.5 mins 0.97 sq.cm Area of standpipe Area of specimen 18.0 sq.cm A. Compute for the hydraulic conductivity of the soil in cm/sec. B. Determine the head di fference at t = 3.50 mins.
A falling head hydraulic conductivity test is performed on a sample of soil. The stand pipe having a diameter of 0.20cm is observed and it takes 60 seconds for the water to drop by 50 cm from an initial hydraulic head of 90cm. The sample has a length of 20cm, and a diameter of 4cm. a.Find the coefficient of permeability (cm/sec) b.Solve for the hydraulic gradient c. Compute the rate of flow of water in the soil. (cm' /sec.) 0.20 cm 6 s TAND PIPE 50cm Acm 不 20am -: SOIL
.-Falling head permeability test, given soil sample: length is 50.8 cm, area=10.17 cm², area of stand pipe=1.3cm2 , head at time zero(to)=76.2cm. head at time 10 min=30.5cm.a) Find hydraulic conductivity of the soil sample. b)what was the head difference at 5 min.
In a falling head permeameter, the sample used is 25 cm long having a cross-sectional area of 24 cm2. The cross-sectional area of the standpipe is 2 cm2. The sample of soil is made of three layers perpendicular to the direction of the flow. The thickness of the top layer is 8 cm and has a value of k1 = 4 x 10-4 cm/sec, the second layer of thickness 10 cm has k2 = 6 x 10-4 cm/sec, and the bottom layer of thickness 7 cm has k3 = 8 x 10-4 cm/sec. Calculate the time required for a drop of head from 25 to 12 cm. ( in minutes).
A sample of sand is subjected to a constant head permeability test. The sample diameter is 60 mm and its length is 130 mm. Under an applied head of 60 cm, 119 cm³ of water flows through the sample in 5 minutes. Determine (a) the coefficient of permeability, and (b) the discharge velocity.
A falling head permeability test was run on a soil sample 9.60 cm in diameter and 10 cm long. The head at the start was 90 cm. The coefficient of permeability of the soil was found to be 5 x 10-6 cm/s. The diameter of the standpipe was 1 cm. What is the rate of flow after 30 minutes? Select the correct response: 10.79 cm/hr 11.04 cm/hr 9.10 cm3/hr 6.46 cm3/hr
For a falling-head permeability test, the following values are given:• Length of specimen 8 in.• Area of soil specimen 1.6 in.2• Area of standpipe 0.06 in.2• Head difference at time t 0 20 in.• Head difference at time t 180 sec 12 in.Determine the hydraulic conductivity of the soil in in./sec
1. For a constant head laboratory permeability test on a fine sand, the following values are given: L = 300 mm; D₁ = 200 mm; h = 400 mm; Vol = 420 m³; t = 4 min; e = 0.55. a. Compute the coefficient of permeability in cm/sec. b. Compute the discharge velocity in cm/sec. c. Compute the velocity. seepage 2. For a falling head permeability test, the following are given. Length of specimen is 380 mm, are of specimen - 6.5 cm², hydraulic conductivity of soil specimen is 0.175 cm/min. a. What should be the area of the stand pipe for the head to drop from 650 cm to 300 cm in 8 min?