A computer employs RAM chips of 512 x 16 and ROM chips of 1024 x 8. The computer system needs 4K bytes ofRAM and 2K bytes of ROM along with interface unit of 128 registers each. A memory mapped 1/O configurationis used. The two higher order bits are assigned for RAM, ROM and interface as 00, 01 and 10 respectively.How many RAM and ROM chips are needed

Name: A computer employs RAM chips of 512 x 16 and ROM chips of 1024 x 8. T
Uploaded: 2024-03-20T06:51:23.000Z
Channel: Bartleby
Description: A computer employs RAM chips of 512 x 16 and ROM chips of 1024 x 8. The computer system needs 4K bytes ofRAM and 2K bytes of ROM along with interface unit of 128 registers each. A memory mapped 1/O configurationis used. The two higher order bits are

Engineering

Computer Science

A computer employs RAM chips of 512 x 16 and ROM chips of 1024 x 8. The computer system needs 4K bytes of RAM and 2K bytes of ROM along with interface unit of 128 registers each. A memory mapped I/O configuration is used. The two higher order bits are assigned for RAM, ROM and interface as 00, 01 and 10 respectively. How many RAM and ROM chips are needed

A computer employs RAM chips of 512 x 16 and ROM chips of 1024 x 8. The computer system needs 4K bytes of RAM and 2K bytes of ROM along with interface unit of 128 registers each. A memory mapped I/O configuration is used. The two higher order bits are assigned for RAM, ROM and interface as 00, 01 and 10 respectively. How many RAM and ROM chips are needed

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

Computer Architecture Consider a computer that has a number of registers such that the three registers R0 = 1500R1 = 4500R2 = 1000 Show the effective address of memory and the registers’ contents in each of the following instructions (assume that all numbers are decimal). 1. ADD (R0)+, R2 2. SUBTRACT - (R1), R2 3. MOVE 500(R0), R2 4. LOAD #5000, R2 5. STORE R0, 100(R2)
A memory system has 4 KB byte-addressable main memory and a direct-mapped cache that consists of 8 blocks with 16 bytes per block. The following shows the main memory address format that allows us to map addresses from main memory to cache. Note: 12 bit address, 4 bit offset, 3 bit $block, and 5 bit tag Assume the cache directory shown below:
Assuming slogan is a char array which stores a valid C-String "Giants", the function call strlen(slogan) will return:
A computer system contains a big endian byte addressable memory system with 8 separate memory modules. Each memory module is 32 bits wide and contains 134217728 cells. Cells within each memory module are numbered 0 through 134217727. a) If the memory employs high order interleaving, what is the 32-bit memory address of cell 1048578 within module 3? b) If the high order interleaved memory uses little-endian instead of big-endian storage order, what is the 32-bit memory address of cell 511 within module 1? c) If the memory employs low order interleaving, what is the 32-bit memory address of byte 1048575 within module 2? Bytes are numbered starting from 0. Express the address in hex. d) What is the main advantage of using low-order interleaved memory compared to using high-order interleaved memory?
A computer with a 32-bit 3.5 gigahertz scalar non- pipelined CPU needs to invert the colors of a 150 KB bitmap image file located in the RAM. To do this, each bit of the image must be complemented (Os are converted to 1s and vice-versa). Assume every instruction undergoes the following stages and each stage uses one CPU clock cycle: • Fetch • Decode • Read from memory • Execute • Write to memory Instructions: For this assignment, you must calculate how much time the computer will need to invert the image with a single-core and a dual core CPU. Show and explain your calculations and assumptions in a short paper and answer the following questions: • Will there be any parallel slowdown? Why or why not? Length: 2-3 page explanatory paper
Assume that a memory is initialised as follows: Memory Address Cell Contents 0x000336 0x38 0x000337 0x26 0x000338 0x48 0x000339 0x38 0x00C33A 0x00C33B 0x77 0x38 The following sequence of operations is executed in the given memory: Write(0x00C337, 0x0205) Write (0x00C339, 0x0106) Write(0x00C338, 0x0109) Assume that the read and write operations are done in groups of two bytes, and the system is a big endian system. What is the result of read(0x00C337) +read (0x00C338)? Write your answer in Base 10 (decimal)
A computer employs RAM chips of 512 x 16 and ROM chips of 1024 x 8. The computer system needs 4K bytes of RAM and 2K bytes of ROM along with interface unit of 128 registers each. A memory mapped I/0 configuration is used. The two higher order bits are assigned for RAM, ROM and interface as 00, 01 and 10 respectively. a) How many RAM and ROM chips are needed
A microprocessor has an increment memory direct instruction, which adds 1 to the value in a memory location. The instruction has five stages: fetch opcode(four bus clock cycles),fetch operand address (three cycles), fetch operand (three cycles) add 1 to operand (three cycles), and store operand (three cycles). a. By what amount (in percent) will the duration of the instruction increase if we have to insert two bus wait states in each memory read and memory write operation? b. repeat assuming that the increment operation takes 13 cycles instead of 3 cycles
what is the maximum number of opcodes
The regions of a 1 MB (Mega Byte) Memory are shown in the diagram below. Each memory register is 1B (Byte). The memory regions are as follows: 256 KB RESERVED, 512KB RAM, 128KB SCREEN, and 1B KEYBOARD. Their arrangement is shown in the diagram below. 0 RESERVED RAM SCREEN KEYBOARD UNUSED 256 KB +4 512 KB 128 KB 1 B
A digital computer has a memory unit with 32 bits per word. The instruction set consists of 110 different operations. All instructions have an operation code part (opcode) and two address fields: one for a memory address and one for a register address. This particular system includes eight general-purpose, user-addressable registers. Registers may be loaded directly from memory, and memory may be updated directly from the registers. Direct memory-to-memory data movement operations are not supported. Each instruction stored in one word of memory. At least, how many bits are needed for the opcode?