Three phase powerA balanced delta-connected source delivers power to a balanced delta-connected load. Theline-to-line voltage at the source is l'i- 173 I'and the load impedance is Za = 30 + j!0 O.jie 2E 30a1732120 V1732-120Vjio nFigure 3a) Find the rmis equivalent line-to-neutral source voltage and the equivatent wye load.b) Find the ms magnitudes of the line currents, the load currents, and the voltages.across the load impedances.c) Find the total power delivered to the load. Assume the line is ideal.:d) What would the power lost in the line if its impedance is v2<45°n.shie

In this question, This is three phase balanced delta supply to three phase balance load. We need to…

A balanced delta-connected source delivers power to a balanced delta-connected load. The line-to-line voltage at the source is l'- 173 l'and the load impedance is Za - 30 + j10 2. 300 1732-120 V Figure 3 a) Find the rms equivalent line-to-neutral source voltage and the equivalent wye load. b) Find the ms magnitudes of the line currents, the load currents, and the voltages across the load impedances. c) Find the total power delivered to the load. Assume the line is ideal.

A balanced delta-connected source delivers power to a balanced delta-connected load. The line-to-line voltage at the source is l'- 173 l'and the load impedance is Za - 30 + j10 2. 300 1732-120 V Figure 3 a) Find the rms equivalent line-to-neutral source voltage and the equivalent wye load. b) Find the ms magnitudes of the line currents, the load currents, and the voltages across the load impedances. c) Find the total power delivered to the load. Assume the line is ideal.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A three-phase substation bus supplies a wye and a delta connected constant impedance loads. The loads are connected in parallel. A three-phase feeder with an impedance per phase of Z = 0.6+j1.8 Q connects the loads to a source as shown in the one- line diagram of Figure below. The loads draw the following three-phase power: P1 = 35 kW S2 = 30 kVA pfi = 0.90 (leading) pf2 = 0.85 (lagging) wye connected delta connected The line-to-line load voltage is 480 V. Detemine: (a) the impedance of each load per phase, (b) the total line current flowing through the feeder, (c) the line-to-line voltage at the substation bus, and (d) the total three-phase real and reactive power supplied by the bus. Zfeed Vbus
Part g
2. A voltage applied to a load is V=208 4 20°V and current through load is I=10 a–10° A. Find the following [SO 1] o complex power consumed by load o Is the load inductive or capacitive? o the power factor of the load o the reactive power consumed or generated by the load. o Does the load consume or supply reactive power?
IL 220230° Load P = 2 kW pf = 0.9 lag Assuming that the source is operating at 60 Hz, determine the following: a.) The value of the current I, in phasor form the magnitude, degrees for the angle) b.) What is the reactive power Q of the load in (volts for KVAR? c.) Is the load consuming or supplying Q? d.) What is the apparent power S of the load in KVA? e.) What is the load resistance? Express your answer in Ohms. f.) What is the load inductance? Express your answer in millihenries.
Given: 1. 2 wye-connected loads per phase to a 3 phase power source 2. first load consists of a 55ohm resistance and a 0.05H inductance per phase 3. second load consumes 1kW and power factor of 0.7 lagging per phase 4. RMS of voltage across the loads are 220V, frequency 120Hz per phase 5. single phase equivalent is shown in the figure: Question: What are the RMS line current at load 1 and 2 respectively?
A delta connected load (Figure 2) has an impedance Z is(12 + j35) ohms. If the applied VAB voltage is 380 V with -50º phase . Get the current IC and load IAB current.
14- A load 100+j0 ohms is connected across a 200V and 50 Hz supply. Find the Power factor. a. Unity b. 0.4 c. 0.8 d. 0.6
Solve it please fast
Please Answer My Questions in 30 minutes i'm very needed... Please thank u...
A three-phase feeder supplies two loads A and B at 380 V (Figure 2).Find the impedance of load A of (55 + j89) ohms and that of load B of(90 + j66) ohms. Ordered as currents in phases A that feed the twoloads, and as currents in the delta connected load.
2. For the following system shown in the figure, calculate: a. The current through each phase of the load. b. The total real and reactive power of the three-phase load. c. The power factor at the load side. A 220 V 20° 220VL-120° U8 vol 152 I 220 VI20° 9. M.
i need the answer quickly