A) A thin 4-ft-wide, right-angle gate with negligible mass is free to pivot about a frictionless hinge at point O, as shown in Fig. (2). The horizontal portion of the gate covers a 1-ft-diameter drain pipe which contains air at atmospheric pressure. Determine the minimum water depth, h, at which the gate will pivot to allow water to flow into the pipe.

A) A thin 4-ft-wide, right-angle gate with negligible mass is free to pivot about a frictionless hinge at point O, as shown in Fig. (2). The horizontal portion of the gate covers a 1-ft-diameter drain pipe which contains air at atmospheric pressure. Determine the minimum water depth, h, at which the gate will pivot to allow water to flow into the pipe.

Name: A) A thin 4-ft-wide, right-angle gate with negligible mass is free to
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A) A thin 4-ft-wide, right-angle gate with negligible mass is free to pivot about a frictionless hinge at pointO, as shown in Fig. (2). The horizontal portion of the gate covers a 1-ft-diameter drain pipe which containsair at atmospheric pressure. D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Quest-4 The top surface of a vertical rectangular gate, with 16 m width and 12 m height, and the upper surface of height coincides with the free water surface. Find the depth of the centre of pressure.
Example 4.14 An open cylindrical tank 0.3 m in diameter and 1.2 m high contains water up to a height of 0.8 m. Determine the speed at which the cylinder may be rotated about its vertical axis so that the axial depth becomes zero.
A circular tank of radius (3) m, the hole has radius (0.004) m and initial height of the water when the hole is opened is (8) m: Find 1- The equation of depth with respect to time? 2- The required depth at time (40) min?
Pomieellipeelem fouti uf ia Problem: Two plungers are installed into a tank filled in with liquid. glkale Plunger diameters are di=40 mm and d;=70 mm. One of the plungers in loaded by force Pi=800 N. Determine the manometer indications and the force P2, which keeps the second plunger in balance.. P2
A flexible riser is installed in a water depth of 110 m. As shown in Figure 1(Q2) it is clamped to a rigid riser support structure at the water depth of 25 meters. If the apparent weight of the riser per unit of length is 1500 N/m, draft of the vessel is 6 m, sagbend elevation is 18m, and the length of the riser between the support structure and the riser connection point is 160m, calculate of top tension applied at the riser connection point. Assume that the riser is a simple inextensible cable. 110 m 25 m 18 m
1. An open trapezoidal tank is accelerated horizontally at 6m/s2 along its length. Its bottom width is 4.20m and its sides are inclined at 3H:4V. If it has a height of 3m, width of 2m and it is filled with water at a height of 2.5m, how much water is spilled out in m3.. 2. A cylindrical shape solid container of sg=0.515 having a diameter of 1.5m and a height of 3.10m is floating in a seawater of sg=1.03. Attached at the bottom of the container is a steel ball of sg= 7.85. If the height of the container projecting above the fluid surface is 0.60m. Determine the diameter in m and weight in KN of the steel ball.
A cylinder with a diameter of 0.5 m and a height of 1.8 m is shown below. The water flows through a flap valve (attached to the pair) with an opening of 0.075 m in diameter. It must be pushed up to open the valve. Determine the force to open the valve.
Define and discuss the important parts of the Duplex Pump.
I got Wrong Solution Previous time. Please Re solve it .
Example: Figure shows a curved surface LM, which is in the form of a quadrant of a circle of radius 3 m, immersed in the water. If the width of the gate is unity, calculate the horizontal and vertical components of the total force acting on the curved surface. Free water surface U L. 3 m Curved surface
The base of a rectangular vessel measures 10cm x 18cm. water is poured in to a depth of 4cm , what is the pressure on the base ?. what is the thrust on the base ?.g=10m/s2
Problem 2. In reference to the figure, gate XY is 1.20m wide and 1.40m long. If the liquid in the tank is seawater (SG=1.03) at a head of 7m, detemine the following: a. total hydrostatic force "F" acting on the gate b. its line of action "h2" vertically from the liquid surface 3m