A 650 bhp Diesel Engine with 6 cylinders has a brake thermal efficiency of 36 % and a jacket water loss of 27%. It uses a closed cooling system with a cooling tower 10 meters high. The temperature rise after passing the water jacket is 12 °C and the cooling tower range is 5 °C. Make a sketch showing the vital parts of the cooling tower system and calculate: a) capacity of the jacket water pump in GPM b) exhaust loss if the friction, radiation and other losses total 8%. c) cooling water flow rate in the cooling tower in liter/hr

Q: In a process plant, water is flowing through a globe valve. The pressure before the entering the…

A: Given: The pressure of water before globe valve, P1 = 10 bar The diameter of valve, d = 100 mm The…

Q: Steam enters a turbine at 600 ᵒC at 7300kPa pressure and leaves the turbine as saturated steam at 75…

A: a) Given values in the question inlet pressure P1=7300kpa Exit pressure P2= 75kpa specific volume at…

Q: A Carnot engine having a 340 x 620 mm bore and stroke operates between 500 degree Celsius and 50…

A:

Q: What is the engine speed (in rpm) required for good volumetric efficiency for a square engine with…

A:

Q: hand writtten plz Q3. A 2000 CC four stroke CI engine intakes air at a rate (mass flow rate) of…

A:

Q: A wind turbine has the following data: Downstream wind velocity = 9 m/s Upstream wind velocity =18…

A:

Q: For example, the intake valve of the 4-stroke 6-cylinder revision KA engine with a volume of 2.4 was…

A: Velocity is the forward motion of a body. It is equal to the distance covered by the body per unit…

Q: Perform on quad paper. Let's take a VW Jetta; it can have a turbodiesel with 50 mpg and a 4-cylinder…

A: Solution:

Q: liter four-stn 0 km at an late for the e w many the p

A: GIVEN :distance travell d=220000v=80km/hrrevoluation n=1800

Q: A fuel pump is delivering 10 gallons per minute of oil with a specific graviy of 0. 83. The total…

A: GivenQ=10gal/minS.G=0.83h=9.14 mDetermine:- how much energy does the pump consumes in kJ per hour

Q: A// For a centrifugal compressor. Prove that: C2? – C,?, Cri² – Gr2 G,-G,² , Cn" – Cun" Cb12 | Power…

A: As per Bartleby's policy in case of multiple questions I can solve only first one. Please resubmit…

Q: a) Calculate the interstage pressure ratio per stage for a two-stage compressor if the overall…

A:

Q: When using a double acting pressure intensifier for continuous pressure increase, we are looking to…

A: Flow rate of intensifier, Q1=5 L/minPressure of instensifier, P1=30 MPaFlow rate of main pump, Q2=10…

Q: A boiler feed pump operates at 40oC suction. If pump efficiency is 85% and needs 20 kW power of…

A:

Q: Write legibly, provide manual step by step solution, and diagram for below given problem. Steam…

A:

Q: What is the braking horsepower?

A: Given data, the flow rate of the pump Q = 90Gpmthe pump head of the water column H = 181 ftPump…

Q: A diesel engine working with cylinder bore of 25 cm and stroke length of 200 mm. the clearance gap…

A: Cylinder bore, D=25 cm=250 mm Stroke length, L=200 mm Clearance gap, l=10 mm

Q: A large heat pump cools the river with a temperature of 223.15 K and flow of 10 m³/s by 3.0 K. The…

A:

Q: A compressor must operate in a speed range between 0 and 1500 rpm. The friction torque of Coulomb Tc…

A: given data- maximum speed = 1500 rpm frictional torque = 10 N-m constant torque = 0.5 N-m to…

Q: Q4) A SI engine four-stroke cycle V8, 0.005m3 displacement, mounted on a hydraulic dynamometer has…

A: Data given- Vd = 0.005 m3  B.P = 53.6 × 103 N  N = 4050 rpm  Q = 0.113 m3 / min  n = 0.93  T1 = 20°C…

Q: a) Using the Euler whirl equation, find the power transfer between a throughput of 100kg/s of air…

A:

Q: 1.- A pump feeds a boiler taking water at 75°C from a constant level tank. The suction pipe is 100 m…

A: Pump detailsSuction pipe length = 100 msuction pipe dia = 5 in = 0.127 mDelivery pipe length = 150…

Q: A steam turbine receives a steam flow rate of 2kg/s and the power output is. 700 kW. The heat loss…

A: For solution refer below images. NOTE:- For specific enthalpy unit should be in KJ/kg.

Q: An auditorium of 150 seating capacity is conditioned for the given specifications. Successhly nd…

A:

Q: 1. define the cutfof ratio and the compression ratio     2. air is compressed at a constant…

A: Define cutoff ratio and compression ratio

Q: 1.) A hand pump is used to inflate a bicycle tire to a gauge pressure of 70 psi. a) How much work…

A:

Q: If you are running 3500lbs PSI of steam thru the turbine and your governor trips at 4200 PSI. What…

A: The running pressure of the steam through turbine:And the maximum pressure that can be handled by…

Q: Project 2 You are an engineer working in a company that provide compressors for food industry, your…

A: a)The possible faults and potential hazards associated with compressor usage are: Electrical…

Q: A 4-stage centrifugal pump discharges 1000 gpm of water at 1750 1pm with a total heat head of 1000…

A:

Q: A pico hydro turgo turbine has a torque of 0.02Nm with a rotational speed of 41 rad/s. The nozzle or…

A: The efficiency of the turbine is 47.5 %.

Q: What size pump is needed to supply 10 gpm to a cylinder when the electric motor is rotating at 1725…

A: Given : V = 10gpm = 10 gallon per minute N = 1725 rpm = 1725 rev per minute

Q: ME. BOARD FEBRUARY, 1951 In a certain diesel- alactric power plant, dieset generator set has the…

A: Given Datadiesel fuel consumption =109495kgP=518000kWT=596hrsηg=90% ***As per our company policy we…

Q: 1-3 A multistage air compressor compresses air from 1 bar to 40 bar. The maximum temperature in any…

A: The initial pressure of air P1=1 bar The final pressure of the air Pn=40 bar The maximum temperature…

Q: The discharge pressure of an air compressor is 8 times the suction pressure. If volume flow at…

A:

Q: A process in a plant is to he revised such that the airflow rate through Si system will increase…

A:

Q: a.) What are the different types of fans used in air-conditioning systems? Discuss their…

A: Solution; Given Data: The volume flow rate of the air is, Q=20 m3/min The duct area is, Ad=0.12 m2…

Q: The air entering a compressor with a pressure ratio of 10 at 100kPa at 27°C leaves at 600K. It…

A:

Q: An Otto engine has a clearance volume of 7%, it produces 300 kW of power in a minute. Find:…

A:

Q: You have invented a hydrogen‐fueled turbine engine that operates between a combustion temperature of…

A: Given:-  Maximum temperature (T) = 2500 K Minimum temperature (t) = 500 K Actual efficiency = 75% of…

Q: The refrigeration system of a food production firm is run using the Reversed Carnot Cycle. The…

A: Given: The temperature of the hot refrigerant, T1 = 52oC The temperature of the sink, T2 = -14oC The…

Q: A two stage air compressor has a suction condition of 100 kpa, 30 o C and has a capacity of 3 m3 /s.…

A:

Q: A two-blade wind turbine is installed on top of a hill experiencing winds of up to 80 mile/h.…

A: Given data: Upstream velocity = 80 mi/hr =vu = 35.7632 m/s Downstream velocity = 50 mi/hr = vd = 50…

Q: The return air temperature of the room is 78F and cooling system load is 48,000 Btu h (sensible).…

A:

Forms of Energy

Energy is described as the capability to accomplish a task, like the ability to push a block by applying force on it. It is a quantitative property that is used to accomplish work on an object.