VsIsRcwwwRw JXLwwwjXMILwwwRLA 140/32 V, 950 VA, 50 Hz single-phase transformer gave the following test results:Open circuit test on LV side: Ioc=5.05 A, Poc = 134 WShort circuit test on HV side: Vsc = 25 V, Psc = 92 WA 22 load is connected to the LV side with rated voltage on the HV side. EfficiencyCalculate the losses in the transformer:PlossWWhat is the efficiency?n=%• Use Complex Numbers throughout.• Use Power Equations to get losses in Rc and Rw. Add these to get total Ploss.• Calculate input power Ps and output power PL to get efficiency, n.

Voltage rating of transformer :140/32 V V1=140 V V2=32 V Power rating, S= 950 VA frequency, f=50 Hz…

A 140/32 V, 950 VA, 50 Hz single-phase transformer gave the following test results: Open circuit test on LV side: Ioc=5.05 A, Poc = 134 W Short circuit test on HV side: Vsc = 25 V, Psc = 92 W A 22 load is connected to the LV side with rated voltage on the HV side.

A 140/32 V, 950 VA, 50 Hz single-phase transformer gave the following test results: Open circuit test on LV side: Ioc=5.05 A, Poc = 134 W Short circuit test on HV side: Vsc = 25 V, Psc = 92 W A 22 load is connected to the LV side with rated voltage on the HV side.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Related questions

Q: Three 100kVA 34.5kV primary 12/6.9kV secondary. Connect the transformers delta-wye. What is the…

A: Given: A transformer with Three 100kVA 34.5kV primary 12/6.9kV secondary. Primary is delta…

Q: A 209 V / 125 V single-phase transformer has a core loss of 120 W and the no-load current is 0.7 A.…

A: We need to calculate power factor .we will use given data to calculate power factor

Q: A 215 V/ 123 V single-phase transformer has a core loss of 120 W and the no-load current is 0.7 A.…

A: Given- A 215 V/123 V single-phase transformer has, Core loss, Wo=120 W Primary side voltage, V1=215…

Q: 2- A 100 kVA,3-phase, 50 Hz, 6,600/400 V transformer is A-connected on HV side andY-connected on LV…

A: Transformer is a static electrical device which transfers power from one circuit to another circuit…

Q: A small filament transformer has a laminated sheet steel core whose average path length is 20cm and…

A: Given Average path lenght = 20 cm Cross sectional area = 5 cm2 Primary winding connection 120 V and…

Q: Q/A single-phase transformer with a capacity of 100 kVA and a voltage of 2000/400 and the equivalent…

Q: A 6-Ohm resistor is connected to the secondary winding of a 1-phase 600V/120V transformer. What is…

A: Resistor value that is given in the secondary side can be transferred to the primary side by…

Q: A load impedance of 52 ohms is connected to the secondary winding of the transformer with 208 volts.…

A: Using ohms law I=V/R Given voltage is 208 volts And impedance of 52 ohms

Q: Consider a single phase transformer with primary and secondary turns of 1000 and 200 respectively…

A: Given:R1=10.5ΩR2=2.5ΩX1=12.5ΩX2=2.5ΩRm=15.55KΩXm=10KΩK=1000200=5

Q: 2-6. A 1000-VA, 230/115-V transformer has been tested to determine its equivalent cir- cuit. The…

A: Transformer of 1000 VA,230/115-v

Q: A 2.2 KVA, 480/4800-V, 50 Hz, single-phase transformer is tested with the following results. Find…

Q: A 205 V/ 129 V single-phase transformer has a core loss of 124 W and the no-load current is O0.8 A.…

A: In the question, given a single phase transformer 205/129V Core loss Po= 124W Current at no load =…

Q: The test results on a 100 KVA, 10000/1000 V, Y-Y 3-4 transfo

Q: 2/A single-phase transformer with a capacity of 100 kVA and a voltage of 2000/400 and the equivalent…

Q: A 400/200 volts transformer has pu impedance of 0.05. The HV side voltage required to circulate full…

A: Turns ratio 400/200 i.e. Base voltage for HV, VHV(base)= 400 V Base voltage for LV, VLV(base) = 200…

Q: Three single phase transformers are connected in a Delta-Wye configuration. Each transformer is…

Q: A 3-phase 10OOKVA, 11000/416 transformer is delta-connected on the primary and star connected on the…

A: TRANSFORMER: The transformer transfers power from one circuit to another circuit without a change…

Q: Draw the equivalent circuit of a 10 KVA, 1860 / 400 V 1-phase transformer with R1=0.4 ohms, R2=0.03…

A: primary referred resistance=R1+R2' R2' is the secondary resistance referred to primary. Similarly…

Q: Three Phase Transformer 3 Three Phase Transformer 4 Transformer 2 Transformer 4 Transformer 1…

A: Four circuit connections are given in the question.Note: For all the transformers the primary side…

Q: A 15-KVA, 2400/240-V transformer is to be tested to determine its excitation branch components, its…

A: The rated KVA of the transformer, S=15 KVA The voltage ratio, 2400/240 V, Results of open circuit…

Q: The following values were seen in the measurements made separately by the primary and secondary of…

A: The Equivalent circuit of Transformer referred to secondary side is shown below. K=Transformation…

Q: 05 V/ 129 V single-phase transformer has a core loss of 124 W and the no-load current is 0.8 A. The…

Q: A 2.2 KVA, 480/4800-V, 50 Hz, single-phase transformer is tested with the following results. Find…

A: Given short circuit test results of tranbsformer is,Asked to find the impedance referred to HV side.

Q: QUESTION 12 A single phase 600v/120v transformer has a load of 30 ohms resistive and 20 ohms…

Q: Q/A single-phase transformer with a capacity of 100 kVA and a voltage of 2000/400 and the equivalent…

Q: A single phase transformer is rat 2,424 V / 206 V. 60 Hz The eau

Q: A 3-phase transformer is assembled by connecting three 720 -VA, 360/120 V single phase transformers…

A: A 3-phase, Y−Δ connected transformer is assembled by connecting three 720 VA, 360/120 V single-phase…

Q: A short-circuit test is performed on a 500 kVA, 69 kV/ 13.8 kV, 50 Hz transformer. The test is…

A: Given data, Vsc=50 V, Isc=5 A, Psc=50 W KVA rating S = 500 KVA Voltage rating 69 KV/13.8 KV

Q: Three single phase transformers are connected in a Delta-Delta configuration. Each transformer is…

Q: Three single phase transformers are connected in a Wye-Wye configuration. Each transformer is rated…

A: Wye-Wye configuration Transformer rated 25kv/62kv Load = 640 KVA Supply = 25Kv (L-N)

Q: 3.) A 110 - KVA, 2200/110, GO He Has the pollowing cincuit constants: R₁ = 0.2252, R₂ = 0.5 mst. x₁…

A: Given information about a single phase transformer is written below. Rated kVA is S=110 kVA. Induced…

Q: A 212 V/ 116 V single-phase transformer has a core loss of 124 W and the no-load current is 0.7 A.…

Q: Given three phase fullwave with center tapped transformer with 220 Vac source voltage, determine:…

A: Since you have posted a question with multiple sub-parts, we will solve the first three subparts for…

Q: Question No.5 A current transformer has a phase error of +5 degree. The phase angle between the…

A: Given: A current transformer has, Phase error, θ=+5°

Q: The distribution factor for 90 slots, 10-pole, 3-phase winding is A 0.90 B C D 0.895 0.959 0.978

A: Given: A 3-phase winding machine with, Slots = 90. Pole = 10.

Q: Problem: The rating of three phases of a 3 winding transformer are: Primary Y-connected: 15MVA,66KV…

A: Consider the base values are given as: 30 MVA, 70 kV Since the base voltage for the primary winding…

Q: 100 kVA, 6800-240 V, 50 Hz single phase step down transformer h RLs=0.0082 RHs=2.62 Rfe-HS=50002…

Q: The maximum size overcurrent device for primary only protection of a three-phase 75 kVA transformer…

Q: transformer 1200 KVA, 11000/2200 V, 50 Hz." akage reactance/phase of the primary winding are…

Concept explainers

Three-Phase Transformers

Three-segment transformers are a type of transformer used to transform voltages of electrical systems into three ranges. Two type transformers are shell-type transformer and core type transformer. In brief, it could be described because of the exquisite kinds of configurations.

Transformer

Ever since electricity has been created, people have started using it in its entirety. We see many types of Transformers in the neighborhoods. Some are smaller in size and some are very large. They are used according to their requirements. Many of us have seen the electrical transformer but they do not know what work they are engaged in.

Question

Vs
Is
Rc
www
Rw JXL
www
jXM
IL
www
RL
A 140/32 V, 950 VA, 50 Hz single-phase transformer gave the following test results:
Open circuit test on LV side: Ioc=5.05 A, Poc = 134 W
Short circuit test on HV side: Vsc = 25 V, Psc = 92 W
A 22 load is connected to the LV side with rated voltage on the HV side.

Efficiency
Calculate the losses in the transformer:
Ploss
W
What is the efficiency?
n=
%
• Use Complex Numbers throughout.
• Use Power Equations to get losses in Rc and Rw. Add these to get total Ploss.
• Calculate input power Ps and output power PL to get efficiency, n.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given

VIEW

Step 2: Losses from open and short circuit test

VIEW

Step 3: equivalent ciruit refered to primary

Step 4: Total losses

Step 5: Efficiency:

Solution

Step by step

Solved in 6 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

If the core loss of single phase transformer at full load is 39 W, then the core loss at 25% of load is O 20W 10W 39W O2W search O O O 0
don't copy
The following values were seen in the measurements made separately by the primary and secondary of a 220/270 V phase transformer. R1 = 4 ohms, X1 = 4.6 ohms, R2 = 0.89 ohms, X2 = 1.79 ohms; R2T = 8.7 ohms, X2T = 8.8 ohms (total values measured on the secondary side), Xm = 60 ohms, Rfe = 750 ohms, (using a T-type equivalent circuit) a.) Primary and secondary currents and their phase angles b.) Active and reactive powers drawn by the transformer from the network. please solve them all, thanks..
The maximum size overcurrent device for primary only protection of a three-phase 45 kVA transformer with a 480V primary and a 120/208V secondary is Oa.50A Ob.60A Oc. 70A Od.90A
Q/A single-phase transformer with a capacity of 100 kVA and a voltage of 2000/400 and the equivalent circuit elements are: As follows R1 = 0.1 02 x1 = 0.2 2 R2 = 0.25 2 X2 = 0.75 2 RO = 500 XO = 150 Q and feeds a load of 90 kVA at a voltage of 2000 volts and a power factor of 8.0 in delay. Calculate voltage and current Primary Royl ww JX eql
4. 100 kVA, 6800-240 V, 50 Hz single phase step down transformer has the following parameters: RLs-0.008Ω RHs-2.6Ω Ri-HS-500 0Ω XLS-0.015Ω XHs=5.22 Xm,HS=88002 Transformer is delivering 80% of rated load at rated voltage and 0.95 lagging power factor. Determine the following: a) The equivalent impedance of the transformer referred to primary. b) Input impedance of the combined transformer and load. c) Actual input voltage at HV side. d) Input impedance if load is disconnected. e) Exciting current at no load.
Three single phase transformers are connected in a Delta-Wye configuration. Each transformer is rated 13kV/64kV. The transformers are connected to a 3 phase 13kV (L-L) supply and the balanced three phase load is 788KVA. What is the current magnitude in the secondary winding of each transformer? explain the steps too please
You have a large single phase transformer with 7 tap settings (@ 0,+2,+4,+6% and -2,-4, and -6%) that lets you adjust the load voltage if necessary. The primary voltage is 4800V and the secondary voltage desired is 240V. Draw this arrangement with the 0% tap setting selected.
iers? Explain. REVIEW QUESTIONS 1. Show how you would parallel connect the transformers to the source and the load in Figure 6-2. Windings 1 to 2 and 3 to 4 are rated for 2.4 kV ac and windings 5 to 6 and 7 to 8 are rated for 400 V ac. C. SOURCE R 2400V Figure 6-2. 2. The efficiency of a transformer which supplies a pure capacitive load is
QUESTION 11 A single phase 600v/120v transformer has a load of 30 ohms resistive and 20 ohms inductive in series. What is the secondary load impedance with the phase angle? O a. 36.1<33.7 degrees O b. 39.5<38 degrees O c. 30.8<28 degrees O d. 46.2<53 degrees
Q4 Figure Q4 below shows the simplified per phase equivalent circuit of a 220 V star connected transformer. The parameters for the equivalent circuit is listed as follows: R1= 1.780 Ohm, R2 = 2.400 Ohm, Re = 0 Xi = 1.255 Ohm, X2 = 0.410 Ohm, XM = 15.000 Ohm Stray loss = 200 W, Core loss = 100 W RI jXi I2 jX2 IM Rc jXm R2 Figure Q4 (a) Find the line current of the transformer. Find the copper loss associated with the primary winding and secondary winding. (b) (c) Calculate the efficiency of the 3 phase transformer.