A 130-mm-thick-one-way slab is reinforced with 12-mm-diameter tension bars spaced at 110 on centers. Concrete cover is 20 mm, concrete strength f'c-21MPa and steel yield strength fy=275MPa. Unit weight of concrete is 23.5 kN/m³ a) What is the ultimate moment capacity of the slab? b) If the slab is simply supported over a span of 4 m, what safe uniform live load pressure can the slab carry?

A 130-mm-thick-one-way slab is reinforced with 12-mm-diameter tension bars spaced at 110 on centers. Concrete cover is 20 mm, concrete strength f'c-21MPa and steel yield strength fy=275MPa. Unit weight of concrete is 23.5 kN/m³ a) What is the ultimate moment capacity of the slab? b) If the slab is simply supported over a span of 4 m, what safe uniform live load pressure can the slab carry?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The maximum load of 200 KN was applied on a cylindrical specimen of concrete. Find the split tensile strength in MPa. Take depth as 150 mm and length as 300 mm.
A reinforced concrete T-Beam has a width of 800mm and a thickness of 50mm. It has an effective depth of 300mm and is reinforced at the bottom with a total steel area of 1800sq.mm. If the web thickness of the T-beam is 200mm, with a concrete strength of fc' = 20MPa and yield strength of steel fy= 400MPa. Assume steel yields. The value of the area subjected tocompressive stress is _sq.mm A. 42,353 sq.mmB. 42,553 sq.mmC. 42,153 sq.mmD. 41,953 sq.mm
Concrete beam.
A rectangular reinforced concrete beam has a width of 300 mm and an effective depth of 400 mm. Concrete strength is f’c = 28 MPa and steel yield strength is fy = 280 MPa. a. What is the distance of the neutral axis from the top of the beam so that the strain in the concrete 0.003 will be attained at the same time with the yield strain of steel? b. What is the total compressive force on concrete? c. What is the balanced steel ratio?
1.) Given the following properties of a rectangular concrete beam: b = 280mm, d = 480 mm, f'c = 21 MPa, fy = 414 MPa. The beam is reinforced for tension only. Determine the design strength under the following conditions. a.) When the beam is reinforced with three 25 mm diameter bars. b.) When the beam is reinforced with four 25 mm diameter bars. c.) When the beam is reinforced with seven 25 mm diameter bars.
Pre-stressed.
Help 35 minutes
SITUATION IIl: A reinforced concrete beam with a cross-section of 250mm x 460mm (60 mm steel cover). Use the following properties to calculate what is required: f'c = 20.7 MPa fy = 344.7 MPa %3D As = 3-36mm A's = 2-25mm 8) Draw the stress diagram of the beam section 9) Calculate for the depth of the compression block. 10) Calculate for the compressive strength of the concrete (in KN). 11) Calculate for the nominal moment capacity of the beam.
please answer in the nearest 3 decimal numbers
Correct solution
What is the threshold torsion (kN-m) of a rectangular beam with a width of 446 mm and an over-all depth of 536 mm? The distance of the tension reinforcements from the bottom fiber of the beam is 75 mm. The specified compressive strength of concrete is 22.00 MPa. The yield strength of tension reinforcements and stirrups are 404 MPa and 323 MPa respectively.