A 50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has a synchronous reactance of 10per-phase, and a negligible armature resistance. The field current is adjusted for 40-KV generator output line voltage at no load.This generator is connected to operate in parallel with a large power system (infinite bus).If the field current is unchanged, determine the absolute maximum output power of this generator.Select one:O a. Pout, max= 221.7 MWO b. NoneO c. Pout may = 384 MwO d. Pout, max = 128 MW

In this question , we will find maximum output power of generator..

50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has a synchronous reactance of 10 er-phase, and a negligible armature resistance. The field current is adjusted for 40-KV generator output line voltage at no load. his generator is connected to operate in parallel with a large power system (infinite bus). f the field current is unchanged, determine the absolute maximum output power of this generator. elect one: J a. Pout, max = 221.7 MW O b. None 2 c. Pout, max = 384 MW O d. Pout, max = 128 MW

50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has a synchronous reactance of 10 er-phase, and a negligible armature resistance. The field current is adjusted for 40-KV generator output line voltage at no load. his generator is connected to operate in parallel with a large power system (infinite bus). f the field current is unchanged, determine the absolute maximum output power of this generator. elect one: J a. Pout, max = 221.7 MW O b. None 2 c. Pout, max = 384 MW O d. Pout, max = 128 MW

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

In a long shunt compound generator, the terminal voltage is 220 when the generator delivers (16*10) A. Given that the shunt field is 133 ohms, series field resistance is 0.022 ohms and armature resistance is 0.02 ohms determine The Emf Generated total power generated Efficiency of the generator if the core and mechanical loss is 66.7% of the copper loss
A 10-kVA, 230-V, three-phase, delta-connected, the synchronous generator has a winding resistance of 0.2 ohms/phase and a synchronous reactance of 0.5 ohms/phase. Determine its voltage regulation when the power factor of the load is (a) 86.6% lagging, (b) 86.6% leading, and (c) unity.
A 50 MVA, 32-KV, 0.85-PF.lagging. 50-Hz, 4-pole, Delta-connected, 3-phase steam-turbine generator has a synchronous reactance of 10 per-phase, and a negligible armature resistance. The field current is adjusted to produce rated voltage at no load. This generator is connected to operate in parallel with a large power system ( infinite bus) If the field current is unchanged, determine the absolute maximum output power of this generator.
Draw the phasor diagrams for the following values of the power coefficient, ignoring the armature winding resistance of a 3-phase, star- connected, dislocated-pole synchronous generator. a) 0.8 inductive b)0.8 capacitive c) 1 omic
A 40 MVA, 24-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3- phase, steam-turbine generator has a synchronous reactance of 10 per- phase, and a negligible armature resistance. The field current is adjusted for 26-KV generator output line voltage at no load. This generator is connected to operate in parallel with a large power system (infinite bus). If the field current is unchanged, determine the absolute maximum output power of this generator. Select one: a. Pout, max = 187.2 MW b. Pout, max = 108 MW O c. Pout, max = 62.4 MW %3D O d. None
(021) Q21) A 5-k VA, 220-V, Y-connected, three-phase, salient-pole synchronous generator is used to supply power to a unity pf load. By means of a slip test, the direct-axis synchronous reactance is found to be 122 and the quadrature-axis synchronous reactance 792. Assume that rated current is delivered to the load at rated voltage and that armature resistance is negligible. (a) Compute the corresponding value of the excitation voltage. (b) What is the value of the internal phase displacement angle Y. (c) What is the value of the power angle? (d) Draw a carefully labeled phasor diagram. Q22) Repeat Prob.21 for the case where the load pf is 0.8 lagging. Q23) Repeat Prob.21 for the case where the load pf is 0.8 leading.
Please solve it quickly
A three-phase, Y-connected, 220-V synchronous generator has an armature resistance of 0.22 Q/phase and a synchronous reactance of 5.2 Q/phase. At the rated voltage, the generator delivers 9.7-kVA to a load at a power factor of 0.83 lagging. A. Determine the excitation voltage, EA. B. Determine the efficiency of the generator if the friction and windage losses are 0.29 KW and the core losses are 0.45 KW. Ignore stray losses. Insert the efficiency below (numbers only):
Solve it within 30 min I will upvote
Subject:machines topic: synchronous machines
A 15-kV 35-KVA 0.76-PF-lagging 50-Hz four-pole Y-connected steam-turbine generator has a synchronous reactance of 3.50 0 per phase and an armature resistance of 0.75 0 per phase. This generator is operating in parallel with a large power system (infinite bus). a) What is the magnitude of E, at rated conditions? b) What is the generator's torque angle at rated conditions? c) If the field current is constant, what is the maximum power possible out of this generator? How much reserve power or torque does this generator have at full load? d) Sketch the corresponding phasor diagram and calculate for the armature current (assume the field current is still unchanged) e) At the absolute power possible, how much reactive power will this generator be supplying or consuming?
Terminal voltage of shunt G1 generator in idle operation is 500 V. The terminal voltage of the G1 generator drops to 470 V if it delivers a load current of 600 A. The idle operating voltage of the shunt G2 generator is 505 V. G2 generator terminal voltage drops to 470 V in case of 400 A load current. These two generators are connected in parallel to feed a load of 400 kW. Voltage-power characteristics of generators are linear. According to this; a. Draw the connection diagram given in the question. b. Obtain the network voltage and the powers of the generators. c. Calculate the current given by each generator to the load.