5-29 The wind velocity in a location varies between 16 and 24 ft/s. A wind turbine with a blade span diameter of 185 ft is to be installed. The wind turbine efficiency is 30 percent at a wind velocity is 16 m/s and 35 percent at 24 ft/s. It is estimated that wind blows at 16 ft/s for 3000 h per year and at 24 ft/s for 4000 h per year. The gearbox/generator efficiency is 93 percent. Determine the amount of electricity that can be produced by this turbine in kWh. Take the density of air to be 0.075 lbm/ft³. Also, determine the blade tip speed in miles per hour (mph) when the blades rotate at 15 rpm.

5-29 The wind velocity in a location varies between 16 and 24 ft/s. A wind turbine with a blade span diameter of 185 ft is to be installed. The wind turbine efficiency is 30 percent at a wind velocity is 16 m/s and 35 percent at 24 ft/s. It is estimated that wind blows at 16 ft/s for 3000 h per year and at 24 ft/s for 4000 h per year. The gearbox/generator efficiency is 93 percent. Determine the amount of electricity that can be produced by this turbine in kWh. Take the density of air to be 0.075 lbm/ft³. Also, determine the blade tip speed in miles per hour (mph) when the blades rotate at 15 rpm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A jet engine is bolted to a stationary test stand and run at full thrust. Air enters the engine at a rate of 80lbm/sec and fuel enters the engine at a rate of 0.8 lbm/sec. Additionally, the following values are known:Pinlet = 13 psi Pexhaust = 14.7 psiVinlet = 500 ft/sec Vexhaust = 1500 ft/secAinlet = 4 ft2 Aexhaust = 3 ft2Find the reaction force required to hold the engine in place on the test stand.
Dresden, Germany has a population of 700,000 and a population density of2200 km-2 in the urban area. Assume that the electrical needs of Dresden are an average of1.0 kWe per capita and these are satisfied by a wind farm consisting of 100 m diameterthree-rotor wind turbines operating at optimal efficiency and with optimal spacing. If thewind velocity is constant at 7 m/s, what is the area of the wind farm? The optimal efficiency, η = 0.49 and The ideal spacing for a turbine is 300m by 1000 meters Sustainable energy, 2nd edition, Ch 10, Problem 17P
A hydroelectric plant gets water from a dam at the rate of 100 cubic meters per minute to generate an output of 12,262.5 KW. If the overall efficiency of the plant is 75%, what is the head of the water in the dam?
i need the answer quickly
An electric blender is used to grind soaked soya beans with initial internal energy of 3000 joules. If the power consumption is 0.1 KW, with heat loss from the blender is 20 joules/sec., determine the time in minutes the operation of the blender to make the final internal energy of 27,000 joules.
Answer it
5- The shaft power of a turbine operating with 70 percent efficiency is 350 kW. If the mass flow rate through the turbine is 625 kg/s, what is the amount of charge removed from the fluid by the turbine? Take it as g=9.81 m/s2
A gasoline engine has a power output of 200 kW. Its thermal efficiency is 32%. (a) How much heat must be supplied to the engine per second? (b) How much heat is discarded by the engine per second? Note: please answer asap! I really need help
Steam flows into a turbine at the rate of 10 kg/s and 10 kW of heat are lost from the turbine. Ignoring elevation and kinetic energy effects, calculate the power output from the turbine.Note : h1 = 2739 kJ /kg and h2 = 2300.5 kJ / kg CHOICES: A. 4605 kW B. 4973 kW C. 4375 kW D. 4000 kW
A engine at full load delivers 100 kW brake power. It requires 25 kW to rotate it without fuel at the same speed. The mechanical efficiency at half load is ?
A 5 kg cylinder 0.5 m in diameter rolls down a plane 5 m long inclined 30° with the horizontal at the bottom of the incline. What is its translational kinetic energy? Neglect friction.
The heat engine in the figure receives 1 MW of energy from the high temperature heat well. Heat The temperature of its source is 550 ° C. Some of the energy received by the heat machine is 300 K heat at the temperature of the well. Power generated by heat machine 450 KW . Calculate how much energy the heat machine puts into the heat well. In addition, the thermal Calculate the efficiency of this efficiency with the efficiency in the case of a Carnot machine. compare. Interpret the result with the reasons