3. The towers of height 35 m and 95 m respectively support a transmission line conductor at water crossing. The horizontal distance between the towers is 550m. If the tension in the conductor is 1550 kg, Weight of conductor is 1-75 kg/m. Bases of the towers can be considered to be at water level. Estimate: i. distance between lowest point on conductor and each tower ii. sag at each tower iii. the minimum clearance between ground and conductor

3. The towers of height 35 m and 95 m respectively support a transmission line conductor at water crossing. The horizontal distance between the towers is 550m. If the tension in the conductor is 1550 kg, Weight of conductor is 1-75 kg/m. Bases of the towers can be considered to be at water level. Estimate: i. distance between lowest point on conductor and each tower ii. sag at each tower iii. the minimum clearance between ground and conductor

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Related questions

Q: Consider an experimental 2000 kV three phase bundle-conductor line with 16-sub-conductors to each…

A: (c) Given Inductance in H per meter per phase is 0.744X10-6. Capacitance in Farads per meter per…

Q: A three-phase overhead transmission line operating at 50 Hz consists of ACSR Drake conductors. The…

A: Given,For the three-phase overhead trnsmission line,Operating frequency, f=50 Hz.For the conductor…

Q: A 3phase 60hz line has flat vertical spacing. The conductor have a GMR of 0.0133m with 10m between…

A: A 3phase 60hz line flat vertical spacing. The conductor have a GMR of 0.0133m 10m between adjacent…

Q: Problem: A three phase transmission line is being supported by 3 disc insulators. The potential…

Q: A three-phase, 50Hz transmission line with a length of "240" is given. It has values of “27” MVA,…

Q: An over head transmission line has a cross area of conductor of 4 cm and supported from two towers.…

A: Given: For an overhead line supported at the same level, weight per meter length of conductor w=6 N,…

Q: The towers of height 45 m and 85 m respectively support a transmission line conductor at water…

Q: An over head transmission line has a cross area of conductor of 4 cm and supported from two towers.…

Q: (a) Determine the transmission line inductance per phase in H/km. (b) Determine the transmission…

A: As per the company guidelines answer to the first three subpart can be given please post the last…

Q: The value of insulation thickness in cm, if conductor diameter is 2cm, provided i) Maximum stress in…

A: Given- Conductor diameter d= 2cm, Maximum stress gmax=40 kV/cm, Minimum stress gmin=10 kV/cm, To…

Q: A 84 meter long conductor with a unit weight of q=(0.8) kg/m is separated from each other. It is…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: Find the average capacitance between each phase and neutral. The associated capacitive reactance for…

A: Given Parameters are: V=66kV, f=50Hz, The radius of each conductor, r=25mm,

Q: Problem 6- A Three-phase 60 Hz transmission line has its conductors arranged in a triangular…

A: we need to find GMD and radius of conductor to calculate the required parameters.

Q: Question 1) A 154 kV transmission line has a length of 100 km. The line and the conductors are given…

A: Concept: In bundled conductors, GMD and GMR increased, reducing inductance hence decreases inductive…

Q: The figure shows a common spacing for a 345 kV line using ACSR Drake conductors in bundles of two…

A: The given figure shows a common spacing for a 345 kV line using ACSR Drake conductors in bundles of…

Q: A transmission line subjected to wind and ice loading with a span of 80 m between level supports has…

Q: Q1(b) Using sketch discuss the impact of following terms occurred in the transmission line…

A: Here is the answer

Q: Question 1) A 154 kV transmission line has a length of 100 km. The line and the conductors are given…

Q: 2) Stranded conductor 61/2.9 mm. calculate the equivalent diameter of conductor? a. 14.5 mm. b. 16.9…

Q: The towers of height 35 m and 95 m respectively support a transmission line conductor at water…

Q: The towers of height 45 m and 85 m respectively support a transmission line conductor at water…

Q: A transmission line is composed of ACSR conductors consiting of eight aluminum strands and two steel…

Q: Q. In a three phase 420 kV high-voltage overhead transmission line, the diameter of the conductors…

Q: If a transmission line has to be designed with an ultimate strength 8000 kg and a safety factor of…

A: Given, l=275 m T=8000 kg w=2 kgmwi=0.7 kgmww=0.95 kgm where, l is the length of span, w is the…

Q: Problem: A three phase transmission line is being supported by 3 disc insulators. The potential…

Q: three phase transposed transmission tower

Q: 2. A three-phase 60-hz transmission line has its conductors arranged in a triangular formation

Q: Give the raceway size required for each of the following conductor combinations: 1. Three, 1/0 AWG,…

A: Given information, Number of conductors=3. Size of conductors=1/0 AWG. Type of insulation is THHN.…

Q: conductors have an overall diameter of 3.0 cm each and are arranged in delta formation. Assuming a…

A: In this question we will find spacing between conductors for given critical disruptive voltage.....

Q: 7. Two towers of height 40 m and 30 m respectively support a transmission line conductor at water…

Q: The total conductor cross section of a 537.40 kV (Peak value) three-phase overhead line with a…

Concept explainers

Types of Charge Carriers

A carrier is a type of object which carries a particular thing from one point to another point. For instance, people use different vehicles from one place to another, and the vehicle carries those people and acts as a carrier.

Question

Q16.
The towers of height 35 m and 95 m respectively support a transmission line
conductor at water crossing. The horizontal distance between the towers is 550m.
If the tension in the conductor is 1550 kg, Weight of conductor is 1-75 kg/m.
Bases of the towers can be considered to be at water level. Estimate:
i.
distance between lowest point on conductor and each tower
sag at each tower
the minimum clearance between ground and conductor
ii.
ii.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Semiconductor Material and Its Energy Band Analysis

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

I need a solution from the handwriting expert
For the Figure 7 shown: A 251 -mile long, 60 Hz, three-phase, 3-wire, transmission line is composed of stranded conductors in each line with GMR of 0.3888 -inch. If the distance D in the figure is 7 ft., What is inductive reactance per line in (ohm)? Figure 7 ³0 1.8D 2.4D 3.2D
The towers of height 45 m and 80 m respectively support a transmission line conductor at water crossing. The horizontal distance between the towers if 500 m. The tension in the conductor is 1750 kg and the weight of the conductor is 1.65 kg/m. the bases of the towers are at the water level. Calculate: i. Sag at lower point ii. Sag at upper point iii. Clearance between lowest point of the conductor and water iv. Draw a suitable figure and mark the values of sag, clearance, span and height of the conductor
Just ii
A 60-Hz, single-phase two-wire overhead line has solid cylindrical copper conductors with a 1cm diameter. The conductors are arranged in a horizontal configuration with 0.71 m spacing. Calculate in mH/km (a) the inductance of each conductor due to internal flux linkages only, (b) the inductance of each conductor due to both internal and external flux link- ages, and (c) the total inductance of the line.
Three Conductors of a 3-phase line are arranged at the corners of a triangle of sides 20, 10, and 18 meters. The diameter of each line conductor is 1 cm. Calculate the Capacitance per phase per km (C1) for this arrangement. Calculate Capacitance per phase per km(C2) if the spacing between the conductors are reduced by 1/4th of given spacing. NOTE -- an Capacitance inuF per Phase per Km for Arrangement 1 (C1) Capacitance in µF per phase per km for Arrangement 2 (C2)
2) Stranded conductor 61/2.9 mm. calculate the equivalent diameter of conductor? a. 14.5 mm. b. 16.9 mm. c. 26.1 mm. d. 20.3 mm.
Question 1) A 154 kV transmission line has a length of 100 km. The line and the conductors are given in Figure 1. The line is operated at f= 50 Hz. For both old and new lines calculate; a. GMD and GMR. b. Inductance of the line in Henries (H). c. Series Impedance (Z) of the line in Ohms. d. *Compare the results for both lines and comment on the results. e. *If the distance between the two neighbouring conductors is increase from 13 meters to 15 meters what would be the parameters in part a.,b. and c. comment on the results. New Line's Conductors 13 m 13 m Old Line's Conductors d r = 2 cm d = 40 cm r = 2 cm Figure 1
Compute up to 4 decimal places but only encode your final answers with only 3 decimal digits
please help solve this question A 100 km Three-Phase 50 Hz transposed transmission line is composed of bundle of three ACSR, 1,431,000 cmil, 47/7 Bobolink conductors as shown in Figure 2 (a). The Three-Phases (bundled Conductors) have flat horizontal spacing of 11 meters as shown in the Figure 2(a). The conductors have a diameter of 3.8 cm and a GMR of 1.5 cm. The Line is going to be replaced with a six conductor bundle of ACSR, 477,000 cmil, 26/7 Hawk conductors. The conductors have a diameter of 2.5 cm and a GMR of 0.9 cm. The new line will have a horisontal phase spacing of 14 meters as it is going to be operated at higher Voltage rating. The new line is shown in Figure 2 (b). The spacing between the bundles in Figure 2 (a) and (b) is 45 cm. Determine,a) The capacitance for each case and the percentage change in capacitanceb) The inductive reactance for each line and the percentage change.c) The inductance for each case and the percentage change ininductance