3) A square footing having the dimension of 22 x 22 is to be constructed on a deep clay deposit. Superstructural stress is calculated as 150 kPa. The foundation will rest at the depth of 2 m from the surface. The groundwater table is located on the surface and the saturated unit weight of the clay is 17 kN/m3. Determine the depth of the borehole considering both de Beer's rule and the Turkish Earthquake Code (2018).

A 1.8 m square, 2 m deep and 1 m high footing supports a column load of 570 kN. It is supported on a clayey sand. There is no water present at the site. Use unit weight for the concrete 24 kN/m³. A dilatometer test run at the site has returned the following constrained modulus profile: Depth (m) M (MPa) 2 7.7 3 8.8 4 5 10.2 14.8 6 15.4 Plot the modulus distribution with depth considering both the strain distribution with depth and the soil moduli, and divide soil into 5 layers, then determine the average modulus for each soil layer.

A 1.8 m square, 2 m deep footing supports a service load of 570 kN. It is supported on a clayeysand. A dilatometer test run at the site has returned the following modulus profile.Depth (m) 2 3 4 5 6 7 8 9 10 11 12M (MPa) 7.7 8.8 10.2 14.8 15.4 10.8 11.6 11.6 13.1 13.8 13.4Compute the footing settlement.

A 1.8 m square, 2 m deep and 1 m high footing supports a column load of 570 kN. It is supported on a clayey sand. There is no water present at the site. Use unit weight for the concrete 24 kN/m³. A dilatometer test run at the site has returned the following constrained modulus profile: Depth (m) M (MPa) 2 E 7.7 3 8.8 Calculate the settlement using Schmertman's method for the period after 50 years. Soil unit weight is 21 kN/m³. Use the correlation between elastic and constrained modulus of soil with Poisson's ration 0.33: (1 + v)(1-2v) (1 − v) 4 5 10.2 14.8 M 6 15.4

A square footing having the dimension of 24 x24 (B=L=24) is to beconstructed on a deep clay deposit. Superstructural stress is calculated as 150 kPa. Thefoundation will rest at the depth of 2 m from the surface. The groundwater table is located onthe surface and the saturated unit weight of the clay is 17 kN/m3. Determine the depth of theborehole considering both de Beer’s rule and the Turkish Earthquake Code (2018).

A footing of 3m x 3m size transmits a load of 1800 KN. The angle of load dispersion in soil is tan-3 0.5. What is the stress created by the footing load at a depth of 5m? *

CEN-333 Geotechnical

in this deposit, at some other location, a plate load test was conducted with 30 cm square plate, placed at a depth of 1 m below the ground level. The ultimate load was 13.5 kN. Water table was at a depth of 4 m below the ground level. Calculate the net safe bearing capacity for a 1.5 m wide strip footing to be founded at a depth of 1.5 m in this soil. Take factor of safety as 3. Use terzaghi's bearing capacity theory.

Subject: Geotechnical engineering Please give me right solution according to the question.. urgent

2. A 2m X 2m footing carrying 1400KN load is constructed in a site with 2.5m thick clay layer under a 2.5m thick sand layer. If the footing and the ground water table are located at 1.5m below the surface, calculate the consolidation settlement of the footing. You may assume the following soil properties: for sand sat 15.7kN/m°, and for clay eo= 0.65, Cc = 0.25, Cs = 0.06, O'p = 200kN/m² and sat =19.25KN/m³. 19.25kN/m and t = %3D