Answer number 24.write your solution pls 16. Find the value of impedance which absorbs a complex power of 2300 VA with a 30degrees angle at 115 V rms.17. A series RLC circuit has R = 100, L = 40 × 10-6H and C = 60 × 10-12F. What is theresonant of the circuit in MHz?18. A series circuit consists of a 120-ohm resistance, a 150 mH inductance and an unknowncapacitance. The circuit is supplied with a voltage V = 100 sin377t. Find the value ofthe capacitance at resonance.19. A parallel RLC circuit has a resonant frequency of 20, 000 rad/sec. If L is equal to 100mH, find the value of C?20. A tuned circuit is resonant at 400 kHz. Its Q is 100. What is its bandwidth?21. A current of 2.5 A flows through a series circuit consisting of a 100 N resistor and anunknown capacitor across a source of 460 V, 50 Hz. What is the value of the capacitivereactance?22. A circuit consists of a 4 N resistor and 300 µF capacitor in series. It is connected acrossa 60 Hz voltage source with a 500 V peak voltage. What is the phasor form of thecurrent?23. The voltage across a given circuit is 15 + j10 V. What is the power supplied to thedrcuit if the current through it is (18 – j5)A?24. The following are in series R = 2, 000 N, L = 600 µH and C= 80, 000 pF. The voltageacross the circuit is 200 V. What is the total impedance expressed in ohms if thefrequency is 100 kHz?25. The maximum instantaneous voltage and current output of an alternator are 300 V and20 A, respectively. What is the power output in watts if the voltage leads the current by30°.26. A two-element series circuit with R = 15 N, L = 20 mH has an impedance of 30 ohmsand an unknown angle. What is the frequency in Hz?27. A 15mH pure inductance is connected in parallel with one microfarad capacitor and a1kohm resistor. What frequency will the circuit be in resonance?28. A 10 ohm resistor is connected in parallel to an impedance Z = 20 – j4 ohms. Find thecircuit power factor?29. The resistor of 100 ohms and unknown impedance coil in series draw 12 A from a 120v, 60 Hz line. If the reactive power taken from the line is 1152 vars, what is the coilinductance?30. A parallel circuit consists of a resistor having a conductance of 14 mhos, an inductivereactor having a susceptance of 8.8 mhos and a capacitive reactor having a susceptanceof 15 mhos. What is the impedance of the circuit?

Answered: Image /qna-images/answer/b71a2865-acf3-4dc1-8d48-2376c7855b28.jpg

Answered: 24. The following are in series R = 2,…

24. The following are in series R = 2, 000 N, L = 600 µH and C = 80, 000 pF. The voltage across the circuit is 200 V. What is the total impedance expressed in ohms if the frequency is 100 kHz? 200

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.7P: Let a 100V sinusoidal source be connected to a series combination of a 3 resistor, an 8 inductor,...

See similar textbooks

Related questions

Q: 8 Q 8 clear load up clk Figure QI

A: It is 8 bit up counter

Q: d the current in i in the electrical circuit below a.15UA b 20u A c. 25UA d.2 5pA Moving to another…

Q: 6. Determine the size of the C, for the following gas flow application. Q₂ = 960C₂ (P₁-P₂) (P₁+P₂)…

Q: why is it saying that 0.3636 is wrong

Q: Determine the voltage across resistor R₂, given: R₁ = 47 Q₁ R₂ = 23 Q2, and /₁ = 1.1 A (Round the…

Q: In an experiment, there are 12 air tight containers containing electrons. The number of electrons in…

Q: A2a R A26 Figure Q3a Figure Q3a shows the circuit schematic of part of an instrumentation amplifier.…

Q: The current in the circuit in the followin figure is known to be i = B₁e 2000€ cos1500t + B₂e-2000t…

A: Given ,i=B1e-2000tcos1500t +B2e-2000tsin1500t for t>o C=80nF Initial voltage across…

Q: Determine the voltage dropped across R₂, given: E = 227 V, R₁ = 44 02, R₂ = 47 02, R₂ = 470, and R₂…

Q: What is the difference between a conductor and a sem Which element is used to construct most…

A: 5) Here we need to explain about the hole in the semiconductor material.

Q: Convert following number in the given radix system. (a) (1010.011)2 to (…………)10 (b) (0.513)10 to…

A: a) Convert base-2 to base-10 To convert base-2 to base-10, multiply with their weights.…

Q: A bank of nickel-cadmium cells is used as the emergency lighting supply for a hospital. There are…

A: When batteries or cells are connected in series, their voltages add and their current capacities…

Concept explainers

Thermocouple

A thermocouple is a temperature measurement device. It includes diverse metal wires which are joined collectively to form a joint. At the same time as the junction is hot or cold, a small voltage is generated inside the measuring thermocouple electrical circuit, which corresponds to the temperature.

Question

Answer number 24.write your solution pls

16. Find the value of impedance which absorbs a complex power of 2300 VA with a 30
degrees angle at 115 V rms.
17. A series RLC circuit has R = 100, L = 40 × 10-6H and C = 60 × 10-12F. What is the
resonant of the circuit in MHz?
18. A series circuit consists of a 120-ohm resistance, a 150 mH inductance and an unknown
capacitance. The circuit is supplied with a voltage V = 100 sin377t. Find the value of
the capacitance at resonance.
19. A parallel RLC circuit has a resonant frequency of 20, 000 rad/sec. If L is equal to 100
mH, find the value of C?
20. A tuned circuit is resonant at 400 kHz. Its Q is 100. What is its bandwidth?
21. A current of 2.5 A flows through a series circuit consisting of a 100 N resistor and an
unknown capacitor across a source of 460 V, 50 Hz. What is the value of the capacitive
reactance?
22. A circuit consists of a 4 N resistor and 300 µF capacitor in series. It is connected across
a 60 Hz voltage source with a 500 V peak voltage. What is the phasor form of the
current?
23. The voltage across a given circuit is 15 + j10 V. What is the power supplied to the
drcuit if the current through it is (18 – j5)A?
24. The following are in series R = 2, 000 N, L = 600 µH and C= 80, 000 pF. The voltage
across the circuit is 200 V. What is the total impedance expressed in ohms if the
frequency is 100 kHz?
25. The maximum instantaneous voltage and current output of an alternator are 300 V and
20 A, respectively. What is the power output in watts if the voltage leads the current by
30°.
26. A two-element series circuit with R = 15 N, L = 20 mH has an impedance of 30 ohms
and an unknown angle. What is the frequency in Hz?
27. A 15mH pure inductance is connected in parallel with one microfarad capacitor and a
1kohm resistor. What frequency will the circuit be in resonance?
28. A 10 ohm resistor is connected in parallel to an impedance Z = 20 – j4 ohms. Find the
circuit power factor?
29. The resistor of 100 ohms and unknown impedance coil in series draw 12 A from a 120
v, 60 Hz line. If the reactive power taken from the line is 1152 vars, what is the coil
inductance?
30. A parallel circuit consists of a resistor having a conductance of 14 mhos, an inductive
reactor having a susceptance of 8.8 mhos and a capacitive reactor having a susceptance
of 15 mhos. What is the impedance of the circuit?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Let a 100V sinusoidal source be connected to a series combination of a 3 resistor, an 8 inductor, and a 4 capacitor. (a) Draw the circuit diagram. (b) Compute the series impedance. (C) Determine the current I delivered by the source. Is the current lagging or leading the source voltage? What is the power factor of this circuit?
Need handwritten and correct solution. Do not use AI please
Design a circuit to limit a 20 V rms sinusoidal voltage to a maximum positive amplitude of 10 V and a maximum negative amplitude of -5 Vusing a single 14 V dc voltage source
C. Convert (6-j8) to polar form, exponential form and trigonometric form.
In a series R–L circuit the p.d. across the resistance R is 12V and the p.d. across the inductance L is 5V. Find the supply voltage and the phase angle between current and voltage
A 15µF capacitor and a 470 ohm resistor are connected in series with a function generator. The supply voltage is 50V RMS 40Hz. Find the reactive power for this circuit.
Shown in the figure below is an "RC" circuit drive by an AC power source. The AC power source has an RMS voltage of Vps (RMS) = 11.58 Volts and is running at a frequency of f = 1.326e+04 Hz. resistor has a resistance of R = 3750 2 and the capacitor has an capacitance of C = 3.17e-09 Farads. Vps R ww Write the FORMULA for the total impedance of the circuit Ztot = Write the FORMULA for the phase of the total impedance of the circuit tot = Determine the numerical value of Ztot = Determine the numerical value of Pztot= Determine the current through the circuit: • I(PEAK) = • I(RMS) = Determine the voltage across the resistor: Amps Amps S2 C degrees
Shown in the figure below is an "RL" circuit drive by an AC power source. The AC power source has an RMS voltage of Vps (RMS) = 9.84 Volts and is running at a frequency of f = 8.585e+04 Hz. The resistor has a resistance of R = 2170 and the inductor has an inductance of L = 3.54e-03 Henries. Vps R ww Write the FORMULA for the total impedance of the circuit Ztot = Determine the numerical value of Ztot = 2890.5 Determine the numerical value of $z= = 41 Determine the current through the circuit: • I(PEAK) = 4.81E-3 • I(RMS) = 3.404E-3 Determine the voltage across the resistor: • VR(PEAK) = 7.387 • VR(RMS) = 5.22 ✔✔ Amps ✔Amps Write the FORMULA for the phase of the total impedance of the circuit z... = | tan-1 2701 R x Volts X Volts Determine the voltage across the inductor: • VL(PEAK) = 9.184 • VL(RMS) = 6.49 ✔ Volts Volts L R²+ WL- ✔ degrees 2 If a second circuit were connected in parallel with the inductor, this circuit would be considered as: O a low-pass filter O a capacitive switcher…
Can someone help me with this question
QUESTION 5 A resistor, a capacitor, an inductor, and a mystery component are connected in parallel. The resistor has a resistance of 300N, the capacitor has a reactance of 2500, and the inductor has a reactance of 6000. The total impedance of the circuit is 59.52-j119.640. What is the mystery component? O there is no mystery component O resistor O inductor O capacitor
Problem E Provide steady-state waveforms for the cap voltage and output voltage on the same timeline. R1 vc(t) Vout (t) C1 til C1 0.2 uF All R 10k +10V IC1 Vcc/-Vcc +8v/ -8V -10V R2 R3
A resistor, a capacitor, an inductor, and a mystery component are connected in parallel. The resistor has a resistance of 300Ω, the capacitor has a reactance of 250Ω, and the inductor has a reactance of 600Ω. The total impedance of the circuit is 59.52-j119.64Ω. What is the mystery component?