(13) A spring has an overall length of 44.0in & sustains a load of 15,000lb @its center. The spring has three full-length leaves & 15 graduated leaves with a central band 4.0in wide. All leaves are to be stressed to 60,000psi when fully loaded. The ratio of total spring depth to width is to be approximately 2.0. Determine: (a) the width & thickness of the leaves; (b) the initial space that must be provided between the full length & the graduated leaves before the band is applied; (c) What load is exerted on the band after the spring is assembled?

(13) A spring has an overall length of 44.0in & sustains a load of 15,000lb @its center. The spring has three full-length leaves & 15 graduated leaves with a central band 4.0in wide. All leaves are to be stressed to 60,000psi when fully loaded. The ratio of total spring depth to width is to be approximately 2.0. Determine: (a) the width & thickness of the leaves; (b) the initial space that must be provided between the full length & the graduated leaves before the band is applied; (c) What load is exerted on the band after the spring is assembled?

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The steel band shown is 50 mm wide and is secured around the smooth rigid cylinder. If the bolts are tightened so that the tension in them is 1800 N, find the normal stress in the band, the pressure exerted on the cylinder and the distance half the band stretches. Assume E = 200 GPa.
The ratio of stress to strain (o-4 /e) in the linear elastic region is . called Young's ........... إجابتك
A rubber band 20 cm long has a cross-sectional area of 4 mm . What load will stretchthe rubber band 1 mm if the modulus of elasticity of rubber band is 4 x 10-15dynes/cm2?
1. A simply supported beam has a clear span of= 22 ft. and is subjected to a factored uniform load of 3.3 k/ft. The distance from the extreme compression fiber to centroid of longitudinal tension reinforcing steel is 17 inches. Assume f.' = 4,000 psi, and fy = 60,000 psi. The factored shear force at the critical section is most nearly: a) 36.3 kips b) 33 kips c) 28.8 kips d) 31.6 kips
Energy stored in stretching a string per unit volume is ___________ a) 1/2×stress×strain b) stress×strain c) Y(Strain)2 d) 1/2 Y(Stress)2
Artificial diamonds can be made using high- pressure, high-temperature presses. Suppose an -6' artificial diamond of volume 1.00 x 10 m is formed under pressure of 5.00 GPa. Find the change in its volume when it is released from the press and brought to atmospheric pressure. Take the diamond's bulk modulus to be B =194 GPa. Use the rules of significant figures.
A load of 2 kg produces an extension of 1 mm in a wire 3 m long and 0.1 cm in diameter. Find Y of the wire.
Artificial diamonds can be made using high-pressure, high-temperature presses. Suppose an artificial diamond of volume 1.28 ✕ 10−6 m3 is formed under a pressure of 4.60 GPa. Find the change in its volume (in m3) when it is released from the press and brought to atmospheric pressure. Take the diamond's bulk modulus to be B = 194 GPa. (Assume the system is at sea level.)
Ggg
A flat steel bar, 30 mm wide by 3 mm thick and 1.7 m long, is bent by couples applied at the ends so that the midpoint deflection is 27 mm. Compute the maximum stress in the bar. Use E = 220 GPa. Answer must be in MPa.
Artificial diamonds can be made using high-pressure, high-temperature presses. Suppose an artificial diamond of volume 1.12 ✕ 10−6 m3 is formed under a pressure of 5.50 GPa. Find the change in its volume (in m3) when it is released from the press and brought to atmospheric pressure. Take the diamond's bulk modulus to be B = 194 GPa. (Assume the system is at sea level.)