13-7. A boiler is constructed of 8-mm-thick steel plates that are fastened together at their ends using a butt joint consisting of two 8-mm cover plates and rivets having a diameter of 10 mm and spaced 50 mm apart as shown. If the steam pressure in the boiler is 1.35 MPa, determine (a) the circumferentialstress in the boiler's plate away from the seam, (b) the circumferential stress in the cuter cover plate akng the rivet line a-a, and (c) the shear stress in the rivets a75m S0 mm

13-7. A boiler is constructed of 8-mm-thick steel plates that are fastened together at their ends using a butt joint consisting of two 8-mm cover plates and rivets having a diameter of 10 mm and spaced 50 mm apart as shown. If the steam pressure in the boiler is 1.35 MPa, determine (a) the circumferentialstress in the boiler's plate away from the seam, (b) the circumferential stress in the cuter cover plate akng the rivet line a-a, and (c) the shear stress in the rivets a75m S0 mm

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter9: Moments And Products Of Inertia Of Areas

Section: Chapter Questions

Problem 9.94RP: The properties of the unequal angle section are Ix=80.9in.4,Iy=38.8in.4, and Iu=21.3in.4. Determine...

See similar textbooks

Related questions

Q: respectively. The tank has an inner diameter of 4 m. The thickness of the cylindrical are made from…

A: A scalar quantity in when when an amount of force act on the object in a cross section area, that is…

Q: mm, an outer diameter of 400 mm and effective length of 600 mm. If this vess

Q: diameter bolt is made of an aluminum alloy. It fits through a magnesium sleeve that has an inner…

Q: A boiler with an outside diameter of 300 mm, length of 1000 mm and a wall thickness of 10 mm is…

A: According to the information we have a boiler with a diameter of 300 mm and a length of 1000 mm…

Q: The inner ring A has an inner radius r1 and outer radius r2. The outer ring B has an inner radius r3…

A: Given data as per question modulus of elasticity of material =E

Q: The pressure tank shown is fabricated from spirally wrapped metal plates that are welded at the…

Q: The bronze C86100 pipe has an inner radius of 0.5 in. and a wall thickness of 0.2in. If the gas…

A: Given data: ri=0.5 int=0.2 inTA=200° FTB=60°F Need to determine the axial force it exerts on the…

Q: A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 20 mm. The…

Q: The gas storage tank is fabricated by bolting together two half cylindrical thin shells and two…

Q: Determine the stress-concentration factor KK due to the 15.0-mm-diameter circular cutout in the…

Q: A thin spherical pressure vessel is required to contain 18 m3 of water at a gauge pressure of 700…

Q: The spherical gas tank is fabricated by bolting together two hemispherical thin shells. If the 8-m…

A: Given Spherical gas tankInner diameter , d=8m ; bolt dia=25 mmGange pressure , P=2MPa∵σallowable…

Q: *13-8. The gas starage tank is fabricated by bolting to- gether two half cylindrical thin shells and…

A: Given, Inner Diameter of the tank (D) = 4 m The inner radius of the tank is (r)= 2 m Maximum…

Q: The cylinder head of a steam engine is subjected to a pressure of 1 N/mm2. It is held in position by…

A: Given:Pressure inside cylinder=P=1Nmm2Effective diamter of cylinder=D=300mmNumber of…

Q: The 10-mm-diameter bolt is made of an aluminum alloy. It fits through a magnesium sleeve that has an…

Q: A boiler is constructed of 8-mm-thick steel plates that are fastened together at their ends using a…

A: given: The diameter of the rivet = 10 mm The steam pressure in the boiler = 1.35 MPa The internal…

Q: An 8 mm thick steel plate has an outside diameter of 600 mm and a length of 3 m. The plate is…

Q: The bronze C86100 pipe has an inner radius of 0.5 in. and a wall thickness of 0.2in. If the gas…

Q: nd hemispherical shells, The bol and the 25 mm diameter bo able normal stress of 150 M

A: given data tank thickness = 50 mm no of bolt/ length = 40 dia of bolt =25 mm allowable stress for…

Q: A rod is made of wrought iron and is secured to the piston by a apered rod and nut and to the…

Q: spherical gas tank is fabricated by bolting together two hemispherical thin shells. If the 510 cm…

Q: The spherical gas tank is fabricated by bolting together two hemispherical thin shells of thickness…

A: Given t=30mm P=2.5MPa D=8m=8000mm n=900 d=20mm

Q: A rylindrical boiler with hemispherical ends has an outside diameter of 6 ft. lf the hoop and axial…

A: Given Hoop stress in boiler σh=15 ksi Axial stress in boiler σa=8 ksi Internal pressure Pin.=200 psi…

Q: The pressure tank shown is fabricated from spirally-wrapped metal plates that are welded at the…

Q: The open-ended pipe has a wall thickness of 2mm and an internal diameter of 38mm. Calculate the…

Q: 13-9. The gas steorage tank is fabricuted by bolting togeth- er two half cylindrical thin shells and…

A: Given, Inner diameter of the tank, d=4mm Radius of the tank, r=d2=42m=2m To find the minimum…

Q: The pressure tank is fabricated from spirally wrapped metal plates that are welded at the seams in…

Q: Two steel rings of radial thickness 30 mm, com- mon radius 70 mm, and length 40 mm are shrunk…

Q: scuba tank has a cylindrical body and a spherical end-cap each of 7.5 inches in outer diameter. The…

Q: A cylindrical tank for transporting compressed gas has an inside diameter of 350 mm and a wall…

A: Given:Internal diameter d = 350 mm Wall thickness t = 4 mm Tensile stress = 220 MPa = 220 N/mm²Note…

Question

13-7. A boiler is constructed of 8-mm-thick steel plates
that are fastened together at their ends using a butt joint
consisting of two 8-mm cover plates and rivets having a
diameter of 10 mm and spaced 50 mm apart as shown. If the
steam pressure in the boiler is 1.35 MPa, determine (a) the
circumferentialstress in the boiler's plate away from the seam,
(b) the circumferential stress in the cuter cover plate akng
the rivet line a-a, and (c) the shear stress in the rivets
a75m
S0 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Trending now

This is a popular solution!

Step by step

Solved in 5 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

The open-ended pipe has a wall thickness of 2mm and an internal diameter of38mm. Calculate the pressure that the ice exerts on the interior wall of the pipe tocause it to burst along the cross-section and along the longitudinal section. Allowablestress at freezing temperature of the material is 350MPa
' A rylindrical boiler with hemispherical ends has an outside diameter of 6 ft. lf the hoop and axialstresses in the boiler must be limited to 15 ksi and 8 ksi respectively, determine the thickness of steel plate required if the internal pressure in the boiler will be 200 psi.
H.Wi A spherical vessel of 1.7m diameter is mache fom 12 mm thick plate auel it is Subjected to a hy draulic test. Determine Ahe additional volume of water which it is necessary to pump into the vessel, when the vessel is intitially just filled with water, in order to raise the pressure to the proof pressure f II 6 bar ( 11.6 M Pa).Th bulk modulus f water is 2-9 Gpa. For the material of vessel E= 200 G pa,S=0.3.
QUESTION 3 A thin spherical pressure vessel is required to contain 18 m3 of water at a gauge pressure of 700 KPa. Assuming the efficiency of all riveted joints to be 75%, and the maximum stress should not exceed 140 MPa. Determine: 3.1 The diameter of the vessel 3.2 The thickness of the plate
The cylindrical air tank is made of 0.5-inch-thick rectangular plates 12 ft welded together as shown. If the allowable normal stress perpen- dicular to the weld is 12 ksi, determine the maximum allowable gage pressure in the tank. 20 ft
Working for an engineering consultancy firm, your knowledge of fluid dynamics is required to design a new safety feature for a high-pressure air line in a factory. The air line takes the form of a cylindrical pipe of diameter 150 mm, which is designed to operate between 0.45 MPa and 0.76 MPa. At the end of the pipe a burs9ng disk is placed so that, if the pressure exceeds the maximum opera9ng pressure, the air is vented to atmosphere rather than over-pressuring the chemical reac9on vessel (Figures 4a and 4b). In this ques9on, you should treat the flow as quasione-dimensional and inviscid. The air in the surrounding atmosphere is at 101 kPa and 298 K. a) You have a choice of five disks which can withstand the following forces across them before burs9ng: 10.5 kN, 11.0 kN, 11.5 kN, 12.0 kN, 12.5 kN. Which of these burs9ng disks would you recommend, and why? b) Due to an over-pressurisa9on of the air line, the disk bursts at 9me t = 0. At what pressure in the air line will this occur? c)…
Need More detailed answers than one available on the platform. Thanks you
The spherical gas tank is fabricated by bolting together two hemispherical thin shells. If the 510 cm inner diameter tank is to be designed to withstand a gauge pressure of 2802 kPa, determine the minimum number of 28-mm diameter bolts that must be used to seal it. The tank and the bolts are made from material having an allowable normal stress of 130 GPa and 323 MPa,respectively.
An 8 mm thick steel plate has an outside diameter of 600 mm and a length of 3 m. The plate is subjected to and internal pressure of 2 MPa. 54. When the tank is filled with water, determine the circumferential stress in MPa Determine the longitudinal stress in MPa at the bottom of the tank when filled with water.
aal 1Banrallng Mament 4m
Choose the correct answer
I need answer within 20 minutes please please with my best wishes