Be quick please 12.81 At steady state, a moist air stream (stream 1) is mixedadiabatically with another stream (stream 2). Stream 1is at 13°C, 1 bar, and 20% relative humidity, with avolumetric flow rate of 0.3 m²/s. A single stream exits themixing chamber at 19°C, 1 bar, and 60% relative humidity,with a volumetric flow rate of 0.7 m'/s. Determine for1o stream 2(a) the relative humidity.(b) the temperature, in °C.bi (c) the mass flow rate, in kg/s.exiung

Given For stream 1 T=13C P=1bar relative humidity=20% volumetric flow rate=0.3m3/s

12.81 At steady state, a moist air stream (stream 1) is mixed adiabatically with another stream (stream 2). Stream 1 is at 13°C, 1 bar, and 20% relative humidity, with a volumetric flow rate of 0.3 m’/s. A single stream exits the mixing chamber at 19°C, 1 bar, and 60% relative humidity, with a volumetric flow rate of 0.7 m'/s. Determine for stream 2 (a) the relative humidity. (b) the temnerature in °Cở e

12.81 At steady state, a moist air stream (stream 1) is mixed adiabatically with another stream (stream 2). Stream 1 is at 13°C, 1 bar, and 20% relative humidity, with a volumetric flow rate of 0.3 m’/s. A single stream exits the mixing chamber at 19°C, 1 bar, and 60% relative humidity, with a volumetric flow rate of 0.7 m'/s. Determine for stream 2 (a) the relative humidity. (b) the temnerature in °Cở e

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Gentlemen, please help to solve a,b,c as I faced confusing questions about screw jack. Conditions are: screw jack is lifting 3.2 tonnes, screw pitch is 12 mm, diameter of the screw is 5 mm. Coefficient of friction was not given but I think we will need it for total force calculation, lets take it 0.2. a) Calculate horizontal component to move the load - what is ment here by horizontal component? b) Calculate vertical component to move the load - what is ment here by vertical component? c) Total force needed to move the load with a lever of 0.82m d) Velocity ratio (VR=distance by effort/distance by load) Distance by effort (lever)=2 x 3.14 x 0.82 = 5.15m Distance by load = pitch= 12mm= 0.012 m VR=5.15/0.012= approx 429. e) Calculate efficiency. For this we need to have MA (mechanical advantage). It can be calculated when we know total force. Efficiency=Load (3200 x 9.8) / effort
What is the Falling Block?
a. What is the ideal mechanical advantage of this system? The inclined plane dimensions are 7.2 meters length and 1.8 meters height.b. What effort force is required to move the 600N create? c. In practice, you need to supply an effort force of 75 N to lift the crate. What is the efficiency?d. How could you redesign this compound machine so that the effort force needed was 50 N in practice? Assume the efficiency is your response from part C no matter what changes you make. Be specific with the changes you propose (if you add pulleys state how many, if you change the inclined plane dimensions state the new dimensions, etc.).
4.41 in.8.82 in.14 in.22.82 in.
can please help me understand how someone could possibly do 75 windmills in a minute?? with madeup calculations please??
Ice skating is an example of ______________ Select one: No friction Static friction Sliding friction Dynamic friction
Would the plank and the roller have the same acceleration why or why not?
8 GRASS IS GROWING ON A DISK SPINNING AT CONSTANT RATE. WHAT IS THE ORIENTATION OF THE STEMS? Grass is growing on a disk spinning at constant rate. What is the orientation of the stems? Inclined towards the centre with a constant angle Inclined towards the centre with a variable angle Vertical Inclined towards the periphery with a constant angle Inclined towards the periphery with a variable angle
What is center of percussion and its importance? What is meant by sweet spot in sports?
Define the term Newton's first law of motion