1.b. By using the Iron-Carbon (Fe-C) phase diagram provided herein, answer the following questions. Re-sketch the relevant portions of the diagram in answering the questions if you believe it is convenient. You may mark your answers on the provided phase diagram as well. Show all you workings and give clear but short explanations in your bluebook whenever needed. a) Identify all phase marked on the phase diagram. What are the reactions below 1200 °C in the Fe-C system? Write down the reactions, including the temperature at which they occur and the % of carbon of each phases participating in the reactions. b) What is the melting point of pure Fe? What is the melting temperature of Fe containing 4.3% carbon? What is the temperature at which 8-Fe transforms to y-Fe? c) Trace the crystallization path of alloys A, B, and C on the phase diagram. You may re-sketch the relevant portion of the phase diagram to mark the crystallization path of each alloy clearly if you wish to do so.

1.b. By using the Iron-Carbon (Fe-C) phase diagram provided herein, answer the following questions. Re-sketch the relevant portions of the diagram in answering the questions if you believe it is convenient. You may mark your answers on the provided phase diagram as well. Show all you workings and give clear but short explanations in your bluebook whenever needed. a) Identify all phase marked on the phase diagram. What are the reactions below 1200 °C in the Fe-C system? Write down the reactions, including the temperature at which they occur and the % of carbon of each phases participating in the reactions. b) What is the melting point of pure Fe? What is the melting temperature of Fe containing 4.3% carbon? What is the temperature at which 8-Fe transforms to y-Fe? c) Trace the crystallization path of alloys A, B, and C on the phase diagram. You may re-sketch the relevant portion of the phase diagram to mark the crystallization path of each alloy clearly if you wish to do so.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

For two hypotetical materials which have limitless solubility for both in the “liquid” and “solid” states in each other, the following data are listed. Melting Temperatures of material A and B are Tm,A and Tm,B respectively, Liquidus and Solidus curves are circular arcs. a- Draw the related “Phase Diagram” of Material A and Material B showing the data given and calculated. b- Calculate/Determine the compositions of phases at T2 , explain the procedure. c- Calculate/Determine the “percentages” of “phases” of Alloy,2 at T2 , explain the procedure. Given: -Tm,A, Celcius =300 -Tm,B, Celcius =800 -T1, Celcius =600 -B percentage of Liquid phase at T1 =25 -B percentage of Solid phase at T1 =70 -B percentage of Alloy 2. =50 -T2, Celcius =650 -B percentage of Liquid phase of Alloy 2 at T2 = to be calculated -B percentage of Solid phase of Alloy 2 at T2 = to be calculated
help pls A two-phase phase diagram is shown. Answer the following questions t -1300 1500+ Temperature 1100 0 34 54! 166 482 80 Composition of Ni % 20 What is the composition (in % Cu) of the solid phase corresponding to the red dot in between the solidus and liquidus lines in the phase diagram? Just write the number. Do not write the % symbol. Question 17 2.33 100 An alloy is being made with 66% Ni and 34% Cu. When it is cooled from 1500°C to the temperature corresponding to the red dot in the phase diagram, how many kg of liquid is present in the mixture?
In a binary Fe-Fe3C system, what is the transformation that occurs when cooling an austenistic mixture of 2% C by weight from 1100°C to below the eutectoid temperature? What is the microstructure, and how is it formed? What are the concentrations of the total and partial phases? Data: eutectoid temperature: 723 ºC, eutectoid concentration: 0.76% C, limit concentration of ferrite: 0.022%, limit concentration of cementite: 6.7%.
Q3/ Draw thermal equilibrium diagram for the binary alloy (Pb- Sn) from the following data :- Lead melting at 327 °C, Tin melting at 232 °C, and the eutectic mixture consists of (61.9 wt% Sn- 38.1% Pb) at 183 °C. The maximum solubility of Sn in Pb 19.5 wt% at 183 °C, but the maximum solubility of Pb in Sn 2.6 wt% at 183 °C, and the solubility limits to each other's decreasing to zero at room temperature. (Assume solubility lines linear). Determine the following :- a- Identify all phases are present in the diagram. b- Calculate the amount of each phase for the alloy which consist of (60wt% pb -40wt% Sn) at 400 °C 200 °C ,and 100°C sn c- Calculate the percentage of eutectic for the alloy which consist of (60wt% Pb- 40wt% Sn) at 150°C 1
Describe the different phases in the Fe-Fe-C diagram?
5
Please help me urgent
5. [Phase Diagram] (1) Here is Cu-Ag phase diagram and two cases (composition and temperature) are given below. At each case, (i) cite the phase(s) present(s), (ii) estimate the phase composition(s), (iii) weight fraction of the phase(s) and (iv) sketch its microstructure for the following alloy. () a. 71.9 wt% Ag-28.1 wt% Cu at just above 779 °C b. 71.9 wt% Ag-28.1 wt% Cu at just below 779 °℃ Temperature (°C) 1200 A 1000 800 600 400 0 200 0 α C (Cu) B 8.0 (Ca E) -Solidus Solvus 20 20 a + L Composition (at% Ag) -Liquidus 779°C (TE) 40 40 a + B Liquid 60 Composition (wt% Ag) 60 E 71.9 (CE) 80 80 B+L 91.2 (CBE) G 100 B H 2200 2000 1800 F 1600 1400 1200 1000 800 600 400 100 (Ag) Temperature (°F)
Please tell me statements in the question is true or false with small reason of your answer Part 2
A hypothetical eutectic phase diagram for metals A and B shows that cooling a liquid melt with a concentration of 50 wt% A-50 wt% B to just below 625 °C (eutectic isotherm temperature) results in simultaneous formation of alpha and beta phases. The phase diagram also shows that alpha (A rich) and beta (B rich) phases exist at left and right extremes of the phase diagram, respectively. At the eutectic isotherm temperature, the maximum solubility of B in A and A in B is 10 wt% and 5 wt%, respectively. The phase diagram does not have any intermetallic compounds. A new solid alloy is made by melting together 86 gr of a 40 wt% A-60 wt% B alloy with 136 gr of 65 wt% A-35 wt% B alloy followed by cooling the melt to 400 °C. If the new alloy is heated up from 400 °C to just below 625 °C, answer the following questions: a. Calculate the overall alloy composition. b. Determine phases present and calculate their respective masses. Calculate the masses of the primary phase, eutectic phase, and…
700 L 600 M a + L Mg, Pb 500 P 465 400 L Mg Pb 300 200 a + Mg Pb B+ Mg Pb 100 20 40 60 80 100 Mg Composition (wt% Pb) Pb Mg,Pb Using the above figure, sketch neatly the microstructure of the alloys (given in the below table) and determine the amount of each phase presented. Structure of the alloys at different compositions 田 Compositions &temperature 10%Pb,90%Mg Structure Structure Compositions &temperature 20%Pb, 80%Mg @400°C @0°C My.Pb 50%Pb,50%Mg 67%Pb, 33%Mg @0°C Mgz PB @0°C 81%Pb,19%Mg 90%Pb,10%Mg @200°C @0°C Temperature ("C)
a) The figure below shows three equilibrium structures that occur in an iron-carbon alloy, rank these from hardest to softest. b) The microstructure of an iron-carbon alloy consists of proeutectoid ferrite and pearlite. Relative mass to proeutectoid ferrite is 0.2 and pearlite is 0.80. How much carbon does this alloy contain?