1. An experimental test rig is used to examine two-phase flow regimes in horizontal pipelines. A particular experiment involved uses air and water at a temperature of 25°C, which flow through a horizontal glass tube with an internal diameter of 25.4 mm and a length of 40 m. Water is admitted at a controlled rate of 0.026 kgs-¹ at one end and air at a rate of 5 x 10-4 kgs-¹ in the same direction. The density of water is 1000 kgm 3, and the density of air is 1.2 kgm 3. Determine the mass flow rate, the mean density, gas void fraction, and the superficial velocities of the air and water. Answer: 0.02605 kgs-¹, 61.1 kgm-3, 0.94, 0.822 ms-¹, 0.051 ms-¹

1. An experimental test rig is used to examine two-phase flow regimes in horizontal pipelines. A particular experiment involved uses air and water at a temperature of 25°C, which flow through a horizontal glass tube with an internal diameter of 25.4 mm and a length of 40 m. Water is admitted at a controlled rate of 0.026 kgs-¹ at one end and air at a rate of 5 x 10-4 kgs-¹ in the same direction. The density of water is 1000 kgm 3, and the density of air is 1.2 kgm 3. Determine the mass flow rate, the mean density, gas void fraction, and the superficial velocities of the air and water. Answer: 0.02605 kgs-¹, 61.1 kgm-3, 0.94, 0.822 ms-¹, 0.051 ms-¹

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Q=2000J Tout=? V(m/s) D=0.1m 1IIIII air Air at (3.20x10^2) K is entering in a circular pipe at…

Q: 4- Consider the fully developed flow of glycerin at 40°C through a 70-m-long, 2-cm-diameter,…

A: Given data as per questionLength of pipe = 70 mDiameter = 4 cmVelocity of fluid = 6 m/sDensity of…

Q: Carbon dioxide flows steadily through a varying cross-sectional-area duct such as a nozzle at a mass…

Q: The liquid food is flowed through an uninsulated pipe at 90 ° C. The product flow rate is 0.4 kg / s…

A: Given data as per question Temperature of fluid =900 c Flow rate = 0.4 kg / s Density =1000 kg /…

Q: An ideal gas passes a diffuser. At the diffuser inlet, the temperature is T1 = 350.00 K, the…

A: Given Pressure, P1 = 100 kPa Temperature, T1 = 350 K Gas constant, R = 0.287 kJ/kg.K Find…

Q: Air at (5.15x10^2) K flows out of a circular pipe at 101325 Pa as shown in Figure. The mass flowrate…

Q: Question 3 Water enters a U-shape pipe at 50 kg/s mass flow rate at inlet 1 and leaves the U-shape…

A: Given:P1 = 300 kPaP2 = 200 kPaP3 = 100 kPad1 = 5 cmd2 = 10 cmd3 = 3 cmDensity of water = 1000…

Q: Air at a temperature of 195oC and a pressure of 500 kPa enters a smooth insulated nozzle with an…

Q: Q=2000J Vout =? m (kg/s) 111111 D=0.1m air Air at (5.00x10^2) K flows out of a dcular pipe at 101325…

Q: Water (modeled as an incompressible substance) flows steadily through a circular pipe of total…

A: Total length of the circular pipe, L=10 mMass flow rate through the pipe, m=2 kg/sTemperature drop…

Q: Pressurized water (Pin = 10 bar, Tin = 110°C) enters the bottom of an L = 12-m-long vertical tube of…

A: Ans Given Now using the steam table, the specific enthaly at pressure and saturated temperature…

Q: Q=2000J Vour =? m (kg/s) D=0.1m air Air at (5.25x10^2) K flows out of a circular pipe at 101325 Pa…

A: Calculate the inlet velocity. mi˙=ρAvimi˙=ρπ4di2vi0.0093=1.2π40.12vivi=0.9867 m/s

Q: Two incompressible fluids (m1=2m2) are flowing at the same mass flow rates in homogenous pipes with…

Q: A tank of oxygen has a hole of area 0.5 cm2 in its wall. The temperature of the oxygen in the tank…

Q: Calculate the inlet pressure required to maintain a flow rate of 8.70 cm3 s −1 of nitrogen at 300 K…

A: Given:Length=10.5 mDiameter=15 mm or 15×10-3 mP2=1 bar or 105 Padynamic viscosity of nitrogen at 300…

Question

4. An experimental test rig is used to examine two-phase flow regimes
in horizontal pipelines. A particular experiment involved uses air
and water at a temperature of 25°C, which flow through a horizontal
glass tube with an internal diameter of 25.4 mm and a length of 40 m.
Water is admitted at a controlled rate of 0.026 kgs-¹ at one end and air
at a rate of 5 x 104 kgs¹ in the same direction. The density of water
is 1000 kgm3, and the density of air is 1.2 kgm-³. Determine the mass
flow rate, the mean density, gas void fraction, and the superficial
velocities of the air and water. Answer: 0.02605 kgs-1, 61.1 kgm ³, 0.94,
0.822 ms-1, 0.051 ms-1

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given

Step 2: solution

Step 3: solution

Solution

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Carbon dioxide is being pumped through a smooth pipe at the rate of 3×10-4 kmol/sec for a distance of 2000 m. Ifthe line is isothermal at 323.15 K and the pressure at the entry point is 750 ×103 Pa and at the exit point is 430×103 Pa, what diameter should the pipe has to ensure that the CO2 will be delivered to the end point with the pressure drop experienced. The viscosity of CO2 at 323.15 K is 1.45×10-5kg/m.s. One trial is sufficient given you tell us how you will proceed to achieve an accurate diameter estimate. Hint: for your initial guess, use D in the range of 0.01-0.02 m.
A liquid while flowing through a thin-walled cylindrical copper pipe (D=10 cm, L=1 m) with a mass flow rate of 0.001 kg/s is heated from Ti= 33 °C to Te= 98 °C by supplying constant surface heat flux to the pipe surface (all the heat is transferred to the fluid). Considering fully developed laminar flow in the pipe, what is the surface temperature of the pipe at the exit in Celsius? (For the fluid use, Cp 1800 J/kg.K, k= 0.2 W/m.K) = constant 117111 q's m = 0.001 kg/s 111 L=1m D= 10 cm
3. A natural gas is flowing through a long distance smooth pipeline (1 m in diameter) at a constant temperature. The gas enters the pipeline at a velocity of 12 m s-1 and at the temperature and pressure of 20 °C and 690 kPa, respectively. Compressors and coolers are provided every 15 km along the pipeline to recompress and cool the gas to its initial temperature and pressure. Calculate the theoretical power requirement to compress the gas by each compressor. Assume that the compression is an adiabatic frictionless process and the work done by the compressor on unit mass of gas is given by: AW = Pout vdP [J kg-¹] Pin where Pin and Pout are the pressures at the inlet and outlet of the compressor, respectively, and vis the specific volume of gas. Hint: see Coulson and Richardson, Volume 1, Section 8.3.4, page 347-351. Specific heat ratio y (= C₂/C₂) = 1.3 [Ans. 845631 W]
An ideal gas passes a diffuser. At the diffuser inlet, the temperature is T1 = 350.00 K, the pressure P1 = 100.00 kPa, the velocity V1 = 200.00 m/s, and the inlet area A1 = 0.30 m2. At the exit, the velocity is very small. The specific heat of the ideal gas at the constant pressure is cp = 1.0050 kJ/(kg·K). The gas constant is R = 0.2870 kPa·m3/(kg·K). Determine the density at the inlet, ρ1 __________(kg/m3)
Not Ai generated answers, I need to understand please show all steps.
(1) Given the working form of the Bernoulli equation as V2 + gz + 2 dW F dm Where F is the friction heating per unit mass dQ F = Au dm Given also that friction heating in laminar flow of Newtonian fluids in circular pipes is given as и 128 -gAz = Q Ax -AP F = Ax is change in the x-direction. A typical capillary viscometer has a large-diameter reservoir and a long, small diameter, vertical tube. The sample is placed in the reservoir and the flow rate due to gravity is measured. The tube is 0.1 m long and has a 1 mm ID. The height of the fluid in the reservoir above the inlet to the tube is 0.02 m. The fluid being tested has a density of 1050 kg / m³. The flow rate is 10-8 m³ / s. What is the viscosity of the fluid? Typical capillary viscometer
Consider the same problem in which an axial compressor with a mean diameter of 0.8 m is being designed to run at 3000 rpm. The whirl velocities at the inlet and outlet are 5m/s and 30 m/s, respectively. The air mass flow rate through the compressor is 2 kg/s at a temperature of 27 °C. Assume C, of air equal to 1000 J/kg-K and Cy = 718 J/kg-K. The pressure ratio is equal to O 1.037 O 1.065 O 1.370 O 1.873
I6
An ideal gas passes a diffuser. At the diffuser inlet, the temperature is T1 = 350.00 K, the pressure P1 = 100.00 kPa, the velocity V1 = 200.00 m/s, and the inlet area A1 = 0.30 m2. At the exit, the velocity is very small. The specific heat of the ideal gas at the constant pressure is cp = 1.0050 kJ/(kg·K). The gas constant is R = 0.2870 kPa·m3/(kg·K). Determine the enthalpy per unit mass at the inlet, h1__________(kJ/kg)
Please help. I am not sure how to approach this problem. This problem involves heat transfer and internal flow within a pipe. Thank you.
A shell-and-tube heat exchanger is used to cool compressed liquid methanol from 176 °F to 104 °F. The methanol flows on the shell side of the exchanger. The coolant is water that rises in temperature from 50 °F to 86 °F and flows within the tubes at a rate of 68.9 kg s1. Finding the appropriate thermophysical data and applying the proper equations, you are required to do the following: (a) Calculate i) methanol mass flow rate in the exchanger, ii) methanol volumetric flowrate at the inlet of the exchanger. (b) i) For the counter-current flow of the fluids calculate the log temperature difference, ii) explain the purpose of calculating this difference, iii) explain, quantitatively, why is the counter-current flow in heat exchangers preferred to co-current flow. mean
Following manufacture, it is planned to use the biodiesel to power a rocket which uses a de Laval nozzle. The nozzle throat has a cross-sectional area of 5.5 x 10-3 m2. The hot air enters the nozzle at 300 bar(atm) and 77 °C and exits nozzle at 1 bar(atm). If we have choked flow at the throat, what is the pressure at the throat? Considering we have choked flow at the throat, what is the flow rate at the exit of the nozzle?