Answered: 1. A radar has a pulse length of T = 10… | bartleby

Related questions

Question

Q19:
1. A radar has a pulse length of t = 10 µs, an azimuth beamwidth 03 = 3°, and an elevation
beamwidth 3 = 3°. At what grazing angle & does the transition occur between the pulse-limited
and beam-limited ground clutter cases when the nominal range to the ground is R = 10 km?
Repeat for R = 50 km.
2. For the same radar used in problem 1, what is the volume V in cubic meters of a volume clutter
resolution cell at R = 10 km? Repeat for R = 50 km.

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

h) The difference in arrival time between wave-packets with centre frequencies of ω1 and ω2 is Δt. What is DM in terms of Δt ?
The figure below depicts spectral reflectance measurements for three different materials: a green leaf from a healthy plant, a sheet of shiny blue paper, and the palm of a human hand. The measurements are labeled 1 (black line), 2 (red line), and 3 (blue line). Match the measurements to the most appropriate material type
Radiation flux and separation distance lab Formula : Counts/Second = Crn C = 4700 counts/second. n = -2.43, detector window area = 1cm^2 Determine the source activity using these values.
5. Assume an MRI scanner imaging 'H with the following specifications: Bo = 3.0 T. Assume that with the Z-gradient on, the magnetic field strength is B0 at location Z = Zc: a. With a bandwidth of 1500 Hz, what is the gradient strength (G2) that would allow us to image a slice with 0.75 mm thickness? b. Using the gradient calculated in (a), we need to acquire an MR slice with the same slice width and positioned at 2.5 cm above the Z. position (Z = Z. +2.5 cm). What is the required RF excitation pulse center frequency (in MHz) for the slice selection pulse?