Unit 9 Discussion board post

Case Study: Paula’s Pain Paula has worked for Brindle Corporation for 3 years.  During this time, she has worked as a machine operator/cell leader in various work cells.  Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months. Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel.  These tubes get a hole punched in them, a flange welded on, and burrs ground off.  The pipe then gets placed into a gage to check that it was made correctly.  (The tubes weigh about six pounds.) Paula has been performing the welding operation.  She leans into the machine and loads the part into a fixture then positions the flange.  Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons. The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position…

Requirement show your working

operations research -  pert cpm

Assignment 1: TIME VALUE OF MONEY Objective: To further understand the concept of the time value of money. INSTRUCTIONS: In each problem, a. Translate data given in problems into their respective graphical representations - i.e. draw the correct cash flow diagram. b. Write down all pertinent given information or data on your paper. c. Calculate answers correctly. 3. A certain college graduate, Sallie Evans, has $24,000 in student-loan debt at the end of her college career. The interest rate on this debt is 0.75% per month. If monthly payments on this loan are $432.61, how many months will it take for Sallie to repay the entire loan?

LESSON: AUTODESK AUTOCAD Choose from the choices:

as per your policy, customer service from bartley stated since you took a incomplete question and answered it instead of questions that actually need answering.    you owe me my questions and not to only solve one question, kindly solve all 3. And when i end up switching to CHEG not only will i be posting this on my vlog and social media i will also be contacting BBB and i will make sure to find out whos the special kid behind answering and trolling me ((:   kindly answer all 3 , thanks

This is the complete question and not a writing assignment. Make sure for this problem you list the following: a. Known: State briefly what is known about the problem. b. Schematic: Draw a schematic of the physical system or control volume. c. Assumptions: List all necessary assumptions used to complete the problem. d. Properties: Identify the source of property values not given to you in the problem. e. Find: State what must be found. f. Analysis: Start your analysis with any necessary equations. Develop your analysis as completely as possible before inserting values and performing the calculations. Draw a box around your answers and include units and follow an appropriate number of significant figures.

Need help with this

Develop a format for technical/lab report writing?

Case Study – The New Engineer   Jeff was just hired by GSI, Inc. to be their Environmental and Safety Coordinator.  This is Jeff's first position after completing his engineering degree.  He had taken a course in safety engineering as part of his studies and felt confident that he could handle the job.   Management at GSI, Inc. has assured him that they are committed to maintaining a safe workplace.  They have never had an individual dedicated to this task full-time.  They will implement his recommendations if he can justify them.   As Jeff begins to get familiar with the operations, he spends considerable time on the production floor.  He notices workers clean their tools before break with a liquid from an unmarked 55-gallon drum.  They also use this liquid to clean residue from their skin.  They use paper towels to dry their tools and hands, throw these towels in the trash, and head to the break room for a snack and/or smoke.   In talking with the workers, Jeff learns of some of…

Case Study – The New Engineer   Jeff was just hired by GSI, Inc. to be their Environmental and Safety Coordinator.  This is Jeff's first position after completing his engineering degree.  He had taken a course in safety engineering as part of his studies and felt confident that he could handle the job.   Management at GSI, Inc. has assured him that they are committed to maintaining a safe workplace.  They have never had an individual dedicated to this task full-time.  They will implement his recommendations if he can justify them.   As Jeff begins to get familiar with the operations, he spends considerable time on the production floor.  He notices workers clean their tools before break with a liquid from an unmarked 55-gallon drum.  They also use this liquid to clean residue from their skin.  They use paper towels to dry their tools and hands, throw these towels in the trash, and head to the break room for a snack and/or smoke.   In talking with the workers, Jeff learns of some of…

write a short essay describing the flow of information when a remote pilot commands the unmanned aircraft to change course.

TOPIC: ENGINEERING ECONOMICS SPECIFIC INSTRUCTION: Solve each problem NEATLY and SYSTEMATICALLY. Show your COMPLETE solutions and BOX your final answers. Express all your answers in 2 decimal places. PROBLEM: Cardinal Financing lent an engineering company Php 500,000 to retrofit an environmentally unfriendly building. The loan is for 5 years at 10 % per year simple interest. How much money will the firm repay at the end of 5 years?