my 13.2.6 Packet Tracer - Verify IPv4 and IPv6 Addressing

• Addressing Table Device Interface IP Address / Prefix Default Gateway R1 G0/0 10.10.1.97 255.255.255.224 N/A R1 G0/0 2001:db8:1:1::1/64 N/A R1 S0/0/1 10.10.1.6 255.255.255.252 N/A R1 S0/0/1 2001:db8:1:2::2/64 N/A R1 S0/0/1 fe80::1 N/A R2 S0/0/0 10.10.1.5 255.255.255.252 N/A R2 S0/0/0 2001:db8:1:2::1/64 N/A R2 S0/0/1 10.10.1.9 255.255.255.252 N/A R2 S0/0/1 2001:db8:1:3::1/64 N/A R2 S0/0/1 fe80::2 N/A R3 G0/0 10.10.1.17 255.255.255.240 N/A R3 G0/0 2001:db8:1:4::1/64 N/A R3 S0/0/1 10.10.1.10 255.255.255.252 N/A R3 S0/0/1 2001:db8:1:3::2/64 N/A R3 S0/0/1 fe80::3 N/A PC1 NIC 10.10.1.100 255.255.255.224 10.10.1.97 PC1 NIC 2001:db8:1:1::a/6 4 fe80::1 PC2 NIC 10.10.1.20 255.255.255.240 10.10.1.17 PC2 NIC 2001:db8:1:4::a/6 4 fe80::3 • Objectives Part 1: Complete the Addressing Table Documentation Part 2: Test Connectivity Using Ping Part 3: Discover the Path by Tracing the Route

• Background Dual-stack allows IPv4 and IPv6 to coexist on the same network. In this activity, you will investigate a dual-stack implementation including documenting the IPv4 and IPv6 configuration for end devices, testing connectivity for both IPv4 and IPv6 using ping , and tracing the path from end to end for IPv4 and IPv6.Complete the Addressing Table Documentation • Use ipconfig to verify IPv4 addressing. • Click PC1 and open the Command Prompt. • Enter the ipconfig /all command to collect the IPv4 information. Fill-in the Addressing Table with the IPv4 address, subnet mask, and default gateway. • Click PC2 and open the Command Prompt. • Enter the ipconfig /all command to collect the IPv4 information. Fill-in the Addressing Table with the IPv4 address, subnet mask, and default gateway. • Use ipv6config to verify IPv6 addressing. • On PC1 , enter the ipv6config /all command to collect the IPv6 information. Fill-in the Addressing Table with the IPv6 address, subnet prefix, and default gateway. • On PC2 , enter the ipv6config /all command to collect the IPv6 information. Fill-in the Addressing Table with the IPv6 address, subnet prefix, and default gateway. • Test Connectivity Using Ping • Use ping to verify IPv4 connectivity. • From PC1 , ping the IPv4 address for PC2 . Question: Was the result successful? Yes Type your answers here. • From PC2 , ping the IPv4 address for PC1 . Question: Was the result successful? Yes Type your answers here. • Use ping to verify IPv6 connectivity. • From PC1 , ping the IPv6 address for PC2 . Question: Was the result successful? Yes Type your answers here. From PC2 , ping the IPv6 address of PC1 . Question: Was the result successful? Yes Type your answers here. • Discover the Path by Tracing the Route • Use tracert to discover the IPv4 path. • From PC1 , trace the route to PC2 .