Chapter 6, Problem 6.97P

Water is put into the boiler at 23oC and 10 bar pressure, where the water will turn into steam saturated at constant pressure. Find of the process and heat required for production 15000 m3 /h slightly under the above conditions. Assume that the velocity of water entering the pot is ignored and steam is known leaves the kettle through a tube with an inner diameter of 0.15 m. The inlet and outlet of the pipe has same height

If the cooling tower range and approach are 10 and 15 degrees centigrade respectively, find the cooling tower effectiveness.

Q112kgof water at 25° Mixed with 30lit of water ats4c.calculate the tempature of the Mixtuce Neglect Q tosses to the Suvroundings and cousider

solve fast please and thank u

There are 100 kg/ min of water entering a heating element at 5 deg C and leaves at 40 deg C. Find the heat addedduring the process.

An air lift pump is used for raising 0.8 L/s of a liquid of density 1200 kg/m3 to a height of 20 meters air is available at 450kN/m2 the efficiency of the pump is 30% assume isentropic compression of air at 1.4. What would be the power requirement?

Please help me answer this problem with complete solution and figure PROBLEM: A fireman reduces the exit area on a nozzle so that the velocity inside the hose is quite small relative to the existing velocity. What is the maximum exiting velocity and what is the maximum height that the water can reach if the pressure inside the hose is 700 Kpa?

7.1kg air is inside a 0.5m3 tank with pressure of 200kpa. Find its temperature

; of gas is compressed wzthout Jriction from an ini- 10 a final state of 0.15 m’ and 0.105 MPa, the Dpres- he process. T, hereiis a transfer of 37.6 kJ of heat from does. the internal energy of the gas change?