Chapter 6, Problem 6.109P

A compressor has R-134a entering at 10°C, 100 kPa and exiting as a saturated vapor. It is given that this particular compressor also involves heat loss (i.e., this compressor, in a non-typical fashion, has a non- zero q; i.e., you cannot neglect q for this compressor). If the compressor operates in a reversible isothermal manner, find the specific heat transfer and specific work.

A piston with water vapor at a pressure of 300 kPa and a temperature of 175 oC. 20 kg of fluid is compressed up to 950 kPa pressure in the cylinder arrangement. Piston cylinder device to a heat well at 80 oC in order to keep the temperature of the water in it constant. The heat generated during compression is discarded. a) What phase is the water in the first case? In the last case, what phase is the water in? b) Find the entropy change in water by the process. c) From the cylinder, assuming that the process is a reversible process at constant temperature. Calculate the amount of heat absorbed. d) Find the entropy change of the heat well. e) Consider the total entropy change including the piston-cylinder mechanism and the heat indicate whether the transaction is reversible or irreversible when received. f) T (° C) -s (kJ / kgK) and P (Pa) - by specifying the state change saturation curves and values Show in (m³ / kg) diagrams.

A pressure cooker 6 ltr

4. An evaporator has R-410A at -20°C and quality 80% flowing in. The exit flow is saturated vapor at -20°C. a. Consider the heating to be a reversible process and find the specific heat transfer from the entropy balance. (Answer: 48.7 kJ/kg) b. If the heat source was at -10°C and the inlet and outlet streams still have the same properties as in a), calculate the specific entropy generation? (Answer: 7.33 J/(kg K))

Find the quanity of heat required to produce 79% dry steam at 8000 kpa from feedwater at 50 degrees celcius ?.

How much entropy is transferred if 200 W of thermal energy are transferred to a heat sink at 300K?

Find the mass of water that can be cooled from 26°C to-10°C from a 20 tons refrigeration system for 14 hrs.

An adiabatic turbine has an efficiency of 90%. If air is compressed from 1100kpa and 227 degree Celsius to 101kpa. Find the work done and final temperature. Sketch process on T-S diagram.

Find the total enthalpy of 1.4 kg of steam that is at 350 kPa with a 0.36 quality?