A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. Determine how much ice needs to be added to the water, in grams, if the ice is at ( a ) 0°C and ( b ) −20°C. Also determine how much water would be needed if the cooling is to be done with cold water at 0°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

Question

Want to see more full solutions like this?

Answer 1

Textbook Question

Chapter 4.5, Problem 134RP

A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. Determine how much ice needs to be added to the water, in grams, if the ice is at (a) 0°C and (b) −20°C. Also determine how much water would be needed if the cooling is to be done with cold water at 0°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

(a)

Expert Solution

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

(b)

Expert Solution

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g

Thus, the amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

R αι g The system given on the left, consists of three pulleys and the depicted vertical ropes. Given: ri J₁, m1 R = 2r; απ r2, J2, m₂ m1; m2; M3 J1 J2 J3 J3, m3 a) Determine the radii 2 and 3.

B: Solid rotating shaft used in the boat with high speed shown in Figure. The amount of power transmitted at the greatest torque is 224 kW with 130 r.p.m. Used DE-Goodman theory to determine the shaft diameter. Take the shaft material is annealed AISI 1030, the endurance limit of 18.86 kpsi and a factor of safety 1. Which criterion is more conservative? Note: all dimensions in mm. 1 AA Motor 300 Thrust Bearing Sprocket 100 9750 เอ

Q2: The plate material of a pressure vessel is AISI 1050 QT 205 °C. The plate is rolled to a diameter of 1.2 m. The two sides of the plate are connected via a riveted joint as shown below. If the rivet material is G10500 with HB=197 and all rivet sizes M31. Find the required rivet size when the pressure vessel is subjected to an internal pressure of 500 MPa. Take safety factor = 2. 1.2m A B' A Chope olm 10.5 0.23 hope

Answer 2

Textbook Question

Chapter 4.5, Problem 134RP

A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. Determine how much ice needs to be added to the water, in grams, if the ice is at (a) 0°C and (b) −20°C. Also determine how much water would be needed if the cooling is to be done with cold water at 0°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

(a)

Expert Solution

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

(b)

Expert Solution

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g

Thus, the amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Textbook Question

Chapter 4.5, Problem 134RP

A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. Determine how much ice needs to be added to the water, in grams, if the ice is at (a) 0°C and (b) −20°C. Also determine how much water would be needed if the cooling is to be done with cold water at 0°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

(a)

Expert Solution

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

(b)

Expert Solution

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g

Thus, the amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Textbook Question

Chapter 4.5, Problem 134RP

A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. Determine how much ice needs to be added to the water, in grams, if the ice is at (a) 0°C and (b) −20°C. Also determine how much water would be needed if the cooling is to be done with cold water at 0°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

(a)

Expert Solution

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

(b)

Expert Solution

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g

Thus, the amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Textbook Question

Answer 6

Textbook Question

Answer 7

(a)

Expert Solution

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

(b)

Expert Solution

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g

Thus, the amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Answer 8

(a)

Expert Solution

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Answer 9

(a)

Expert Solution

Answer 10

(a)

Expert Solution

Answer 11

Expert Solution

Answer 12

To determine

The amount of ice that needs to be added into water at 0 C of temperature.

Answer 13

Answer to Problem 134RP

The amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Answer 14

Explanation of Solution

Write the expression for the mass of the water.

mw=ρV (I)

Here, the density of the water is ρ and the volume of the water is V.

Write the expression for the energy balance equation.

Ein−Eout=ΔEsystem (II)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Simplify Equation (II) and write energy balance relation of cold water

Qin−Wout=ΔU (III)

Here, the heat to be transfer into the system is Qin, the work to be done by the system is Wout, and the change in the internal energy is ΔU.

Conclusion:

Substitute 0 for Qin and 0 for Wout in Equation (III).

0=ΔU0=ΔUice+ΔUwater0=[mc(0°C−T1)solid+mhif+mc(T2−0°C)liquid]ice+[mc(T2−T1)]water (IV)

Here, the mass of the ice is m, the heat of fusion of ice is hif, the specific heat of ice at liquid state is c, the initial temperature of ice is T1, and the final temperature of ice is T2

From the Table A-3 “Properties of common liquids, solids and foods”, obtain the value of specific heat of ice at 0 C and room temperature as 2.11 kJ/kg°C and 4.18 kJ/kg°C.

Substitute 1 kg/L for ρ and 0.3 L for V in Equation (I).

mw=(1 kg/L)(0.3 L)=0.3 kg

For initial temperature of ice as 0 C.

Substitute 0°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−0°C)solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0m[0+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water=0m=0.0546 kg×(1000 g1 kg)m=54.6 g

Thus, the amount of ice that needs to be added into water at 0 C of temperature is 54.6 g_.

Answer 15

(b)

Expert Solution

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g

Thus, the amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Answer 16

(b)

Expert Solution

Answer 17

(b)

Expert Solution

Answer 18

Expert Solution

Answer 19

To determine

The amount of ice that needs to be added into water at -20 C of temperature.

The amount of water that needs to cool down the cold water at 0 C of temperature.

Answer 20

Answer to Problem 134RP

The amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

The amount of water that needs to cool down the cold water at 0 C of temperature is 900 g_.

Answer 21

Explanation of Solution

Substitute 0 for Qin and 0 for Wout in Equation (III) and write energy balance relation for cooling down the cold water.

0=ΔU0=ΔUcoldwater+ΔUwater0=[mc(T2−T1)]coldwater+[mc(T2−T1)]water (V)

Here, the mass of cold water is mcoldwater, the specific heat of cold water is ccoldwater, the initial temperature of cold water is T1,coldwater, the final temperature of cold water is T2,coldwater, the mass of water is mwater, the specific heat of water is cwater, the initial temperature of water is T1,water, and the final temperature of water is T2,water.

Conclusion:

For initial temperature of ice as -20 C instead of 0 C.

Substitute −20°C for T1,solid, 2.11 kJ/kg°C for csolid, 333.7 kJ/kg for hif, 4.18 kJ/kg⋅°C for cliquid, 5°C for T2,liquid, 0.3 kg for mwater, and 20°C for T1,water in Equation (IV).

[[m(2.11 kJ/kg°C)(0°C−(−20°C))solid+m(333.7 kJ/kg)+m(4.18 kJ/kg⋅°C)((5°C)−0°C)liquid]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(5°C−20°C)]water]=0[m[(2.11 kJ/kg°C)(20°C)+(333.7 kJ/kg)+(4.18 kJ/kg⋅°C)(5°C)]ice+[(0.3 kJ/kg)(4.18 kJ/kg⋅°C)(−15°C)]water]=0m=0.0487 kg×(1000 g1 kg)m=48.7 g

Thus, the amount of ice that needs to be added into water at -20 C of temperature is 48.7 g_.

Substitute 4.18 kJ/kg⋅°C for c, 5°C for T2,coldwater, 0°C for T1,coldwater, 0.3 kg for mwater, 5°C for T2,water, and 20°C for T1,water in Equation (V).

[mcoldwater(4.18 kJ/kg⋅°C)(5−0)°C]+(0.3 kg)(4.18 kJ/kg⋅°C)(5−20)°C=0[mcoldwater(4.18 kJ/kg⋅°C)(5°C)]+(0.3 kg)(4.18 kJ/kg⋅°C)(−15°C)=0m=0.9 kg×(1000 g1 kg)m=900 g