Fundamentals Of Thermal-fluid Sciences In Si Units
Fundamentals Of Thermal-fluid Sciences In Si Units
5th Edition
ISBN: 9789814720953
Author: Yunus Cengel, Robert Turner, John Cimbala
Publisher: McGraw-Hill Education
bartleby

Videos

Question
Book Icon
Chapter 19, Problem 135RQ

(a)

To determine

The rate of heat loss from the water.

(a)

Expert Solution
Check Mark

Explanation of Solution

Given:

The Length of pipe (l) is 15m.

The thermal conductivity (k) is 52W/mK.

The inner diameter (d1) is 4cm.

The inner diameter (d2) is 4.6cm.

The temperature of air (T) is 10°C.

The temperature of hot water (T) is 90°C.

The speed of water (V) is 1.2m/s.

The emissivity (ε) is 0.7.

The convection heat transfer coefficient (h) is 12W/m2K.

Calculation:

Refer Table A-22 “Properties of saturated air at 1atm pressure”.

Obtain the following properties of air corresponding to the temperature of 90°C as follows:

k=0.675W/mKPr=1.96ρ=965.3kg/m3cp=4206J/kgKv=0.326×106m2/s

Calculate the mass flow rate of water (m) using the relation.

    m=ρAV=(965.3kg/m3)(π4(0.04m)2)(1.2m/s)=1.456kg/s

Calculate the Reynolds number (Re) using the relation.

  Re=Vdv=(1.2m/s)(4cm×1m100cm)0.326×106m2/s=147240

Calculate the Nusselt number (Nu) using the relation.

    Nu=hDk=0.125fRePr1/3=0.125×0.032×147240×1.961/3=737.1

Calculate the heat transfer coefficient (h) using the relation.

    h=kDNu=0.675W/mK(4cm×1m100cm)(737.1)=12440W/m2K

Calculate the rate of heat transfer by convection (Qc) using the relation.

    Q=hA(TsT)=hπd2l(TT)=(12W/m2K)(π(4.6cm×1m100cm))(15m)((90°C+273)K(10°C+273)K)=2081W

Calculate the rate of heat transfer by radiation (Qr) using the relation.

    Qr=εAσ(T4T4)=[(0.7)(π(4.6cm×1m100cm))(15m)(5.67×108W/m2K4)×((90°C+273K)4(10°C+273K)4)]=942W

Calculate the total heat transfer (Q) using the relation.

    Q=Qc+Qr=2081W+942W=3023W

Thus, the rate of heat loss from the water is 3023W.

(b)

To determine

The temperature at which the water leaves the basement.

(b)

Expert Solution
Check Mark

Explanation of Solution

Given:

The Length of pipe is (l) is 15m.

The thermal conductivity (k) is 52W/mK.

The inner diameter (d1) is 4cm.

The inner diameter (d2) is 4.6cm.

The temperature of air (T) is 10°C.

The temperature of hot water (T) is 90°C.

The speed of water (V) is 1.2m/s.

The emissivity (ε) is 0.7.

The convection heat transfer coefficient (h) is 12W/m2K.

Calculation:

Calculate the temperature at which water leaves the basement (Te) using the relation

  Q=mcp(TTe)Te=TQmcp=(90°C+273)K3023W(1.456kg/s)(4206J/kgK)=(362.5K273)°C=89.5°C

Calculate the temperature at which the water (ΔTp) leaves the basement.

    ΔTP=Q(ln(d2/d1))2πkL=3023W×((ln(4.6cm/4cm))2π(52W/mK)(15m))=0.09K

The temperature difference is same in K as well as °C so the value of ΔTp can be taken as 0.09°C.

Thus, the temperature at which the water leaves the basement is 0.09°C.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Assignment 10, Question 4, Problem Book #202 Problem Statement An ideal Brayton cycle with a two-stage compressor, a two-stage turbine, and a regenerator operates with a mass flow rate of 25 kg/s. The regenerator cold inlet is at 490 K and its effectiveness is 60%. Ambient conditions are 90 kPa and 20°C. The intercooler operates at 450 kPa and the reheater operates at 550 kPa. The temperature at the exit of the combustion chamber is 1,400 K. Heat is removed in the intercooler at a rate of 2.5 MW and heat is added in the reheater at a rate of 10 MW. Determine the thermal efficiency and the back work ratio. Use a cold air standard analysis with cp = 1.005 kJ/(kg K) and k = 1.4. . Answer Table Stage Description Your Answer Correct Answer Due Date Grade (%) 1 Thermal efficiency (%) Dec 5, 2024 11:59 pm 0.0 1 Weight Attempt Action/Message 1/5 Part Type Submit 1 Back work ratio (%) Dec 5, 2024 11:59 pm 0.0 1 * Correct answers will only show after due date has passed.
Assignment 10, Question 3, Problem Book #198 Problem Statement Consider a Brayton cycle with a regenerator. The regenerator has an effectiveness of 75%. The compressor inlet conditions are 1.2 bar and 300 K and the mass flowrate is 4.5 kg/s. The compressor outlet pressure is 9 bar. Both the compressor and turbine consist of a single isentropic stage. What minimum power output must be achieved before the regenerator begins to have a benefit? Use an air-standard analysis. Answer Table Correct Answer Stage Description Your Answer Due Date Grade (%) Part Weight Attempt Action/Message Туре 1 Power output (MW) Dec 5, 2024 11:59 pm 0.0 1 1/5 Submit * Correct answers will only show after due date has passed.
Q-3 Consider an engine operating on the ideal Diesel cycle with air as the working fluid. The volume of the cylinder is 1200 cm³ at the beginning of the Compression process, 75 cm³ at the end, and 150 cm³ after the heat addition process. Air is at 17°c and lookpa at the beginning of the compression proc ess. Determine @ The pressure at the beginning of the heat rejection process. the net work per cycle in kjⒸthe mean effective pressur. Answers @264.3 KN/m² ②0.784 kj or 544-6 kj © 697 KN 19 2 m

Chapter 19 Solutions

Fundamentals Of Thermal-fluid Sciences In Si Units

Ch. 19 - The upper surface of a 50-cm-thick solid plate (k...Ch. 19 - Prob. 12PCh. 19 - During air cooling of oranges, grapefruit, and...Ch. 19 - During air cooling of steel balls, the convection...Ch. 19 - Prob. 15PCh. 19 - Water at 43.3°C flows over a large plate at a...Ch. 19 - Prob. 17PCh. 19 - Hot engine oil at 150°C is flowing in parallel...Ch. 19 - Prob. 19PCh. 19 - Prob. 22PCh. 19 - Prob. 23PCh. 19 - Prob. 24PCh. 19 - Prob. 25PCh. 19 - Prob. 27PCh. 19 - Prob. 28PCh. 19 - Prob. 30PCh. 19 - Prob. 31PCh. 19 - Solar radiation is incident on the glass cover of...Ch. 19 - Liquid mercury at 250°C is flowing with a velocity...Ch. 19 - Prob. 35PCh. 19 - Prob. 36PCh. 19 - Air is flowing in parallel over the upper surface...Ch. 19 - Prob. 40PCh. 19 - Consider laminar flow of air across a hot circular...Ch. 19 - Prob. 42PCh. 19 - A heated long cylindrical rod is placed in a cross...Ch. 19 - A person extends his uncovered arms into the windy...Ch. 19 - Prob. 46PCh. 19 - Prob. 47PCh. 19 - Prob. 49PCh. 19 - Consider a person who is trying to keep cool on a...Ch. 19 - A 12-ft-long, 1.5-kW electrical resistance wire is...Ch. 19 - Prob. 52PCh. 19 - Prob. 53PCh. 19 - Prob. 55PCh. 19 - Prob. 56PCh. 19 - A 10-cm-diameter, 30-cm-high cylindrical bottle...Ch. 19 - Prob. 58PCh. 19 - An incandescent lightbulb is an inexpensive but...Ch. 19 - Prob. 60PCh. 19 - Prob. 61PCh. 19 - Prob. 62PCh. 19 - A coated sheet is being dried with hot air blowing...Ch. 19 - Prob. 65PCh. 19 - Consider laminar forced convection in a circular...Ch. 19 - Consider turbulent forced convection in a circular...Ch. 19 - What does the logarithmic mean temperature...Ch. 19 - Prob. 69PCh. 19 - Prob. 70PCh. 19 - Prob. 71PCh. 19 - Prob. 72PCh. 19 - Prob. 73PCh. 19 - Cooling water available at 10°C is used to...Ch. 19 - Prob. 75PCh. 19 - Inside a condenser, there is a bank of seven...Ch. 19 - Prob. 79PCh. 19 - Prob. 81PCh. 19 - Prob. 82PCh. 19 - In a thermal system, water enters a 25-mm-diameter...Ch. 19 - Prob. 84PCh. 19 - Prob. 85PCh. 19 - Prob. 86PCh. 19 - Prob. 88PCh. 19 - Prob. 89PCh. 19 - Prob. 90PCh. 19 - Glycerin is being heated by flowing between two...Ch. 19 - Determine the convection heat transfer coefficient...Ch. 19 - Prob. 94PCh. 19 - Water is to be heated from 10°C to 80°C as it...Ch. 19 - Consider a fluid with a Prandtl number of 7...Ch. 19 - The hot water needs of a household are to be met...Ch. 19 - Prob. 98PCh. 19 - Prob. 99PCh. 19 - Hot air at atmospheric pressure and 85°C enters a...Ch. 19 - Prob. 102PCh. 19 - Prob. 104PCh. 19 - Prob. 105PCh. 19 - Prob. 106PCh. 19 - Prob. 107RQCh. 19 - Prob. 108RQCh. 19 - The passenger compartment of a minivan traveling...Ch. 19 - Prob. 110RQCh. 19 - Prob. 111RQCh. 19 - Prob. 112RQCh. 19 - Prob. 113RQCh. 19 - Prob. 114RQCh. 19 - Prob. 115RQCh. 19 - Prob. 116RQCh. 19 - Airstream at 1 atm flows, with a velocity of 15...Ch. 19 - Prob. 118RQCh. 19 - Prob. 119RQCh. 19 - Prob. 120RQCh. 19 - Prob. 121RQCh. 19 - A 3-m-internal-diameter spherical tank made of...Ch. 19 - Prob. 123RQCh. 19 - Prob. 124RQCh. 19 - Prob. 125RQCh. 19 - Prob. 126RQCh. 19 - Prob. 127RQCh. 19 - Prob. 128RQCh. 19 - Prob. 129RQCh. 19 - Prob. 130RQCh. 19 - Prob. 131RQCh. 19 - Prob. 132RQCh. 19 - Prob. 133RQCh. 19 - Prob. 134RQCh. 19 - Prob. 135RQCh. 19 - Prob. 136RQCh. 19 - Prob. 137RQCh. 19 - Prob. 138RQCh. 19 - Prob. 139RQCh. 19 - Prob. 140RQCh. 19 - Liquid water enters a 10-m-long smooth rectangular...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Heat Transfer – Conduction, Convection and Radiation; Author: NG Science;https://www.youtube.com/watch?v=Me60Ti0E_rY;License: Standard youtube license