The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Question

Want to see more full solutions like this?

Answer 1

Question

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

= A steel pile (H-section; HP 310 x 125; and so A, 15.9 x 10-3 m² ) is driven into a layer of sandstone. The length of the pile is 25 m. Following are the properties of the sandstone: unconfined compression strength = qu(lab) = 78 MN/m² and angle of friction = 36°. Using a factor of safety of 3, estimate the allowable point load that can be carried by the pile. Use [qu(d Qu(lab). qu(design) b)/5]. (Enter your answer to three significant figures.) Qp(all) kN

Си A concrete pile 20 m long having a cross section of 0.25 m x 0.25 m is fully embedded in a saturated clay layer. For the clay, given: Ysat = 18 kN/m³, = 0, and c₁ = 80 kN/m². Determine the allowable load that the pile can carry (FS-3). Use the A method to estimate the skin resistance. For L = 20 m, A = 0.173. (Enter your answer to three significant figures.) Qall kN

A concrete pile 65 ft long having a cross section of 15 in. × 15 in. is fully embedded in a saturated clay layer for which Ysat = can carry. (Let FS = 3.) Use the a method equation QsfpAL = ac₂pAL and the following table to estimate the skin friction and Vesic's method for point load estimation. Си α Pa ≤ 0.1 1.00 0.2 0.3 0.92 0.82 0.4 0.74 0.6 0.62 0.8 0.54 1.0 0.48 1.2 0.42 1.4 0.40 1.6 0.38 1.8 0.36 2.0 0.35 2.4 0.34 2.8 0.34 Note: atmospheric pressure pa ≈ 100 kN/m² or 2000 lb/ft². (Enter your answer to three significant figures.) Qall = kip 121 lb/ft³, = 0, and Cu = 1600 lb/ft². Determine the allowable load that the pile

Answer 2

Question

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Question

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Question

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Answer 6

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Answer 7

Chapter 18, Problem 1P

To determine

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Answer 8

Expert Solution & Answer

Explanation of Solution

Asphalt cement is obtained after the segregation of lubricating oils. It's semi-solid hydrocarbon with certain physio-chemical characteristics which make it a good cementing agent.The processes of refining that are used to obtain petroleum asphalts are mainly of two types:

Fractional distillation.
Destructive distillation.

Fractional distillation:

It includes the following steps:

Fractional distillation comprises of segregation of different materials in crude petroleum without substantial changes in their chemical composition.
It includes removal of different types of volatile materials in the crude oil by gradually increasing temperatures by using steam or by vacuum.
The crude petroleum at high temperatures gets separated in the distillation tower and gets collected on the successive trays.
The temperature is increased by steam or by vacuum process.

Destructive distillation:

It includes the following steps:

Destructive distillation also known as cracking includes application of enormously high temperature and pressure which results in the chemical composition of the materials.
Destructive distillation involves intense heat as high as 1100^OF and high pressure up to 735 lb/in² to produce effective changes in the chemical composition of the materials.
This process is mainly used when high quantities of the light fractions of materials are required.
The asphalt cement from this process is not used in pavement because it is more vulnerable to climate changes comparative to that produced from the fractional distillation.

The process of obtaining asphalt binders that can be used to coat highly siliceous aggregates can be defined as follows:

1. Asphalt binders are formed from the asphalt cement, by breaking the asphalt cement into minute particles, usually 100 to 250 in penetration range and spreading them in water with an emulsifier.

2. The small particles that are produced are electrically like charged, and hence they don't merge.

3. Asphalt emulsions mainly consist asphalt around 55% to 70 % by weight with an emulsifying agent and a stabilizer in some cases.

4. These emulsions are classified into three categories, which are anionic, cationic and nonionic. Out of these, cationic emulsions are more effective with the electronegative aggregates for example those having high percentages of siliceous material.

Answer 9

Expert Solution & Answer

Answer 10

Expert Solution & Answer

Answer 11

Ch. 18 - Prob. 1P Ch. 18 - Prob. 2P Ch. 18 - Prob. 3P Ch. 18 - Prob. 4P Ch. 18 - Given the specifications for an asphaltic concrete...Ch. 18 - Given the particle size distributions of two...Ch. 18 - Given the particle size distributions of two...Ch. 18 - Given four different types of aggregates to be...Ch. 18 - Prob. 9P Ch. 18 - Prob. 10P

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Concept explainers

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Explanation of Solution

Want to see more full solutions like this?

Chapter 18 Solutions

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Concept explainers

To describe: The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.

Explanation of Solution

Want to see more full solutions like this?

Chapter 18 Solutions

To describe:

The process of distillation by which asphalt cement is produced from crude petroleum and the process of obtaining asphalt binders which is used to coat highly siliceous aggregates.