You are assigned to monitor the operation of water tank for the ABC company during your internship placement. It is assumed that the water discharged from the tank should follow the discharge model ?(?)=??−1−√(?+?), where ? is the pressure applied in Pascal (Pa) and ?(?) is the amount of water discharged in ?3 from the tank per-hour. The tank will need to undergo maintenance if the water discharge from the tank deviates at the true percent relative error of 5% from the discharge model. (The constants ? and ? are determined by the last two digits of your student’s ID. For example: If your student’s ID is 123456. ?=6 and ?=5. However, if your last two digits are 00 or 01 or 10, use ?=2 and ?=3.) Fill in TABLE Q3 with reasonable reading from your monitoring job, 7(?)<27. TABLE Q3 ? (Pa) 3.5 3.7 3.9 4.1 4.3 ?(?) (?3/ℎ) In the fulfillment of your internship completion, you are required to provide the performance report of the water tank, to suggest if maintenance is necessary. Your report should contain the error analysis of the machine performance against the discharge model. To validate reliabilities, your report must use all the readings from TABLE Q3 in each of your analysis, with 5 decimal places, and up to five iterations when necessary. The report should include the following. i. Estimation of water discharged when pressure of 3.8 Pa is used. ii. Rate of production at the pressure of 3.9 Pa. iii. The suggested pressure if the water discharged is 15 ?3/ℎ. iv. Discussion of your analysis and suggestion if the maintenance is necessary.   A is 9 and B is 8

Elements Of Electromagnetics
7th Edition
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Sadiku, Matthew N. O.
ChapterMA: Math Assessment
Section: Chapter Questions
Problem 1.1MA
icon
Related questions
Question

You are assigned to monitor the operation of water tank for the ABC company during your internship placement. It is assumed that the water discharged from the tank should follow the discharge model
?(?)=??−1−√(?+?),
where ? is the pressure applied in Pascal (Pa) and ?(?) is the amount of water discharged in ?3 from the tank per-hour. The tank will need to undergo maintenance if the water discharge from the tank deviates at the true percent relative error of 5% from the discharge model. (The constants ? and ? are determined by the last two digits of your student’s ID. For example: If your student’s ID is 123456. ?=6 and ?=5. However, if your last two digits are 00 or 01 or 10, use ?=2 and ?=3.)
Fill in TABLE Q3 with reasonable reading from your monitoring job, 7<?(?)<27.
TABLE Q3
? (Pa)
3.5
3.7
3.9
4.1
4.3
?(?) (?3/ℎ)
In the fulfillment of your internship completion, you are required to provide the performance report of the water tank, to suggest if maintenance is necessary. Your report should contain the error analysis of the machine performance against the discharge model. To validate reliabilities, your report must use all the readings from TABLE Q3 in each of your analysis, with 5 decimal places, and up to five iterations when necessary. The report should include the following.
i. Estimation of water discharged when pressure of 3.8 Pa is used.
ii. Rate of production at the pressure of 3.9 Pa.
iii. The suggested pressure if the water discharged is 15 ?3/ℎ.
iv. Discussion of your analysis and suggestion if the maintenance is necessary.

 

A is 9 and B is 8

You are assigned to monitor the operation of water tank for the ABC company during
your intemship placement. It is assumed that the water discharged from the tank
should follow the discharge model
f(x) = e*-1 – (A + B),
where x is the pressure applied in Pascal (Pa) and f(x) is the amount of water
discharged in m³ from the tank per-hour. The tank will need to undergo maintenance
if the water discharge from the tank deviates at the true percent relative error of 5%
from the discharge model. (The constants A and B are determined by the last two
digits of your student's ID. For example: If your student's ID is 123456. A = 6 and
B = 5. However, if your last two digits are 00 or 01 or 10, use A = 2 and B = 3.)
Fill in TABLE Q3 with reasonable reading from your monitoring job, 7 < f(x) < 27.
TABLE Q3
37 39 41
x (Pa)
3.5
3.7
3.9
4.1
4.3
f(x) (m³ /h)
In the fulfillment of your internship completion, you are required to provide the
performance report of the water tank, to suggest if maintenance is necessary. Your
report should contain the error analysis of the machine performance against the
discharge model. To validate reliabilities, your report must use all the readings from
TABLE Q3 in each of your analysis, with 5 decimal places, and up to five iterations
when necessary. The report should include the following.
i.
Estimation of water discharged when pressure of 3.8 Pa is used.
i.
Rate of production at the pressure of 3.9 Pa.
ii.
The suggested pressure if the water discharged is 15 m³/h.
iv.
Discussion of your analysis and suggestion if the maintenance is necessary.
Transcribed Image Text:You are assigned to monitor the operation of water tank for the ABC company during your intemship placement. It is assumed that the water discharged from the tank should follow the discharge model f(x) = e*-1 – (A + B), where x is the pressure applied in Pascal (Pa) and f(x) is the amount of water discharged in m³ from the tank per-hour. The tank will need to undergo maintenance if the water discharge from the tank deviates at the true percent relative error of 5% from the discharge model. (The constants A and B are determined by the last two digits of your student's ID. For example: If your student's ID is 123456. A = 6 and B = 5. However, if your last two digits are 00 or 01 or 10, use A = 2 and B = 3.) Fill in TABLE Q3 with reasonable reading from your monitoring job, 7 < f(x) < 27. TABLE Q3 37 39 41 x (Pa) 3.5 3.7 3.9 4.1 4.3 f(x) (m³ /h) In the fulfillment of your internship completion, you are required to provide the performance report of the water tank, to suggest if maintenance is necessary. Your report should contain the error analysis of the machine performance against the discharge model. To validate reliabilities, your report must use all the readings from TABLE Q3 in each of your analysis, with 5 decimal places, and up to five iterations when necessary. The report should include the following. i. Estimation of water discharged when pressure of 3.8 Pa is used. i. Rate of production at the pressure of 3.9 Pa. ii. The suggested pressure if the water discharged is 15 m³/h. iv. Discussion of your analysis and suggestion if the maintenance is necessary.
Expert Solution
steps

Step by step

Solved in 2 steps

Blurred answer
Knowledge Booster
Applied Fluid Mechanics
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
  • SEE MORE QUESTIONS
Recommended textbooks for you
Elements Of Electromagnetics
Elements Of Electromagnetics
Mechanical Engineering
ISBN:
9780190698614
Author:
Sadiku, Matthew N. O.
Publisher:
Oxford University Press
Mechanics of Materials (10th Edition)
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:
9780134319650
Author:
Russell C. Hibbeler
Publisher:
PEARSON
Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:
9781259822674
Author:
Yunus A. Cengel Dr., Michael A. Boles
Publisher:
McGraw-Hill Education
Control Systems Engineering
Control Systems Engineering
Mechanical Engineering
ISBN:
9781118170519
Author:
Norman S. Nise
Publisher:
WILEY
Mechanics of Materials (MindTap Course List)
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:
9781337093347
Author:
Barry J. Goodno, James M. Gere
Publisher:
Cengage Learning
Engineering Mechanics: Statics
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:
9781118807330
Author:
James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:
WILEY