You and your younger brother are designing an air rifle that will shoot a lead pellet with mass m = 1.20 g and cross-sectional area A = 0.0150 cm². The rifle works by allowing high-pressure air to expand, propelling the pellet down the rifle barrel. Because this process happens very quickly, no appreciable thermal conduction occurs and the expansion is essentially adiabatic. Your design is such that, once the pressure begins pushing on the pellet, it moves a distance of L = 40.0 cm before leaving the open end of the rifle at your desired speed of v= 110 m/s. Your design also includes a chamber of volume V = 13.0 cm³ in which the high-pressure air is stored until it is released. Your brother reminds you that you need to purchase a pump to pressurize the chamber. To determine what kind of pump to buy, you need to find what the pressure of the air must be in the chamber (in Pa) to achieve your desired muzzle speed. Ignore the effects of the air in front of the bullet and friction with the inside walls of the barrel. (Assume that air is diatomic.) Pa

You and your younger brother are designing an air rifle that will shoot a lead pellet with mass m = 1.20 g and cross-sectional area A = 0.0150 cm². The rifle works by allowing high-pressure air to expand, propelling the pellet down the rifle barrel. Because this process happens very quickly, no appreciable thermal conduction occurs and the expansion is essentially adiabatic. Your design is such that, once the pressure begins pushing on the pellet, it moves a distance of L = 40.0 cm before leaving the open end of the rifle at your desired speed of v= 110 m/s. Your design also includes a chamber of volume V = 13.0 cm³ in which the high-pressure air is stored until it is released. Your brother reminds you that you need to purchase a pump to pressurize the chamber. To determine what kind of pump to buy, you need to find what the pressure of the air must be in the chamber (in Pa) to achieve your desired muzzle speed. Ignore the effects of the air in front of the bullet and friction with the inside walls of the barrel. (Assume that air is diatomic.) Pa

Name: You and your younger brother are designing an air rifle that will sho
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: You and your younger brother are designing an air rifle that will shoot a lead pellet with mass m = 1.20 g and cross-sectional area A = 0.0150 cm². The rifleworks by allowing high-pressure air to expand, propelling the pellet down the rifle barrel.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In the figure, we must apply a force of magnitude 83.0 N to hold the block stationary at x = -3.00 cm. From that position, we then slowly move the block so that our force does +4.00 J of work on the spring-block system; the block is then again stationary. What are the block's positions? ((a) positive and (b) negative) (a) Number i (b) Number i x=0 F = 0 00000000 x positive F, negative m ! ! (a) (b) ā Units -Block attached to spring x negative Ę, positive cm Units cm x
A hydroelectric turbine with a rotor diameter of 2.5 m produces 76 kW of electrical power when the water velocity at 37°C is 8.5 m/s. What percentage of the kinetic energy of the water hitting on the turbine is converted to electrical energy? For the physical and chemical data of water refer to Perry's Chemical Engineering Handbook.
Shown on the figure below is an open tank that contains water at 10 °C. Incoming water are from the top portion of the tank at 10 kilogram per second and at the left side water inlet section of the tank. Water discharges at the lower right section of the tank at a velocity of 4 meters per second. In order to maintain the water level in the tank at a height (h) of 10 meters, the inlet mass velocity of water situated at the left side section of the tank is Blank 1 kg / m²-s. *Express your answers in whole significant figure without decimal value and without unit* Water at 10 kg/sec Water inlet h = 10 m D = 50 mm D = 70 mm Water outlet at 4 m/sec
The tension in the walls of a horizontal 0.1 m diameter pipe under a static pressure of 10000 cm of water and submerged to a depth of 10 m in a fresh-water river is:
A wind turbine located at a height of 25m from ground, produces 950 kW. Its hub diameter negligible in comparison with length of the blade. Calculate the length of the blade. The average wind velocity is 15 m/s and wind density is 1.25 kg/m3.Gear box efficiency as 85%, Generator efficiency as 75% and Transmission efficiency as 80%. The value of Cp=0.29 and it is a horizontal type of wind turbine.
A 1-kg object with an initial velocity of 14 m/s falls from a height of 240 m and buries itself in a 0.20 m of sand. Find the average resistive force exerted by the sand on the object? Neglect air resistance and solve the problem by considering work and energy of the system. What is the magnitude of the force exerted by the object in the sand?
THERMODYNAMICS 11 kg of air is heated from 24 to 84 degrees Celsius in a piston-cylinder device by passing electricity via a resistive heater within the cylinder. The pressure within the cylinder is remained constant at 300kPa during the procedure, and a 78kJ heat loss occurs. What is the kWh value of the supplied electric energy?
Air is trapped in the piston in the cylinder. A spring is connected to the upper portion of the piston and returns the force upon compression by the F = -kx equation. k = 50,000 N/m and x is the distance traveled when the piston is compressed. The piston is located 10 cm above the bottom of the cylinder with a cross-sectional area of 0.01 m2 and an initial condition of 1 bar and 25°C. In this state, the spring does not apply force to the piston. At this time, the system was reversibly heated and the temperature rose to 100°C. (a) What happened was (b) What is the heat transferred?
Fluid Mechanics
A platform supported by 4 parallel springs: 2 long and 2 short springs, have a spring constant of 7.30 kN/m and 10.95 kN/m. A 55 kg box is dropped onto it from a height of 1.5m. Find the compression of each spring if the short springs are 0.1m shorter than the long springs.
hi, can you solve this ?