With reference to the NSCP 2015, choose the correct statement: For design of flexure members, tension-controlled section is: Select the correct response: when the tensile steel strain is greater than or equal to 0.005 when the tensile steel strain is greater than or equal to 0.004 when the tensile steel strain is greater than or equal to 0.003 when the tensile steel strain is greater than or equal to the tensile yield strain / DreviOUS

Q: A plate having a width of 400 and a thickness of 20mm is to be connected to two plates with…

A:

Q: Thursday Nov.24, 2020 Compute the design strength in tension, Pn, of an ASTM F1554 Gr. 36 % in…

A: Compute the design strength in tension Pn, of an ASTM F1554 Gr. 36% in diameter THREADED rod.Your…

Q: 25 mm PROBLEM 2.49 Brass core The aluminum shell is fully bonded to the brass core and the assembly…

A:

Q: The steel assembly is constructed with a 0.25-inch-diameter pin at C and with 0.5-inch- diameter…

A: Given  ,  Tult , pin = 22 ksi                   σult = 58 ksiAlso , FOS =  σult σall =  Tult  Tall…

Q: pecify a suitable aluminum casting alloy for a bar with square crosssection. Length of one side of…

A: Given:- The length of the one side of the cross-section= 50 mm The value of the tensile load = 60 kN…

Q: A steel 4340, with tensile strength of 550 Mpa and Compressive -550 Mpa with length of 3.5 mm find…

A: Permissible maximum stress to a structural member is generally subjected, that is large enough to…

Q: What is the Charpy V-Notch test used for? a) Assessing corrosion resistance b) Assessing compressive…

A: Given data: Charpy V-Notch test.

Q: A No. 8 steel rebar is tested in tension. By monitoring the load reading of the testing machine, it…

A:

Q: 2- The Tensile stress of AISI 1035 Cold-dra (a) 550 MPa. (b) 500 MPa. (c) 450 MPa.

A: AISI stands for American Iron and Steel Institute- AISI 1035 is a water resistance carbon steel.…

Q: lost steel reinforcing bars manufactured in the U.S. exhibit a sharp yield plateau. Two xceptions,…

A: The gradual yielding of quenched-and-tempered and straightened reinforcing steel is due to the…

Q: A mild steel flat of width 120 mm and thickness 10 mm is bent into an arc of a circle of radius 10 m…

A: Width of mild steel flat b=120 mm,Thickness t=10 mm,Radius R=10 m,To Find-The value of the pure…

Bars

In civil engineering, bars refer to steel reinforcement bars or rebars. These are structural members primarily used for reinforcement purposes in masonry works. A bar is characterized by its cross-sectional area, which is negligible compared to its length. Bars are usually manufactured by steel which is uniform throughout the length, or by meshing multiple steel wires. Other materials of the bar include carbon steel, glass fiber, carbon fiber, and basalt fiber. The reinforcing bars are coated with epoxy resins and other materials to enhance some of their properties including corrosion resistance.